Home > Runco > Projector > Runco Vx 2dcx Projector User Manual

Runco Vx 2dcx Projector User Manual

Here you can view all the pages of manual Runco Vx 2dcx Projector User Manual. The Runco manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 41

Installation
Runco VX-2cx/VX-2dcx Owner’s Operating Manual 29 
PREL
IMINARY
Digital (DTV) RGB or Component Video Connections: See Figure 3-8. 
Figure 3-8. Digital (DTV) RGB or Component Video Connections
DVI 1HD1
HD2
G/YINPUTS
HV R/Pr B/PbG/Y H V R/Pr B/Pb
DVI 2
Component Video Pb
Pr YVideo
S-Video 2 S-Video 1 12 3TRIGGERS
DTV or Progressive
Component (YPbPr)
Source
Red/Pr Green/Y  Blue/Pb  Horiz  Vert 

Page 42

Installation
30 Runco VX-2cx/VX-2dcx Owner’s Operating Manual
PREL
IMINARY
Analog (Computer) RGB Connections: See Figure 3-9. 
Figure 3-9. Analog RGB Connections
DVI 1HD1
HD2
G/YINPUTS
HV R/Pr B/PbG/Y H V R/Pr B/Pb
DVI 2
Component Video Pb PrY Video S-Video 2S-Video 1 12 3TRIGGERS
Personal Computer
Red Green Blue Horiz  Vert 

Page 43

Installation
Runco VX-2cx/VX-2dcx Owner’s Operating Manual 31 
PREL
IMINARY
Composite/S-Video/Component Video Connections: See Figure 3-10. 
Figure 3-10. Composite, S-Video and Component Video Connections
DVI 1HD1
HD2
G/YINPUTS
HV R/Pr B/PbG/Y H V R/Pr B/Pb
DVI 2
Component Video Pb PrY Video S-Video 2S-Video 1 12 3TRIGGERS
DVD Player, VCR,
Satellite Receiver,
Laser Disc etc.
Pb    Pr      Y 

Page 44

Installation
32 Runco VX-2cx/VX-2dcx Owner’s Operating Manual
PREL
IMINARY
RS-232 Controller 
Connection
Use a standard, 9-pin RS-232 cable to connect a PC or home theater control/automation 
system (if present) to the RS-232 Control port on the DHD Controller; see 
Figure 3-11. 
For more information about using this connection, refer to Serial Communications on 
page 61.
Figure 3-11. RS-232 Control System Connection
Connecting 12-Volt 
Trigger Outputs to 
External 
Theater 
Equipment 
If your VX-2 is...

Page 45

Installation
Runco VX-2cx/VX-2dcx Owner’s Operating Manual 33 
PREL
IMINARY
If your home theater contains a retractable screen, screen mask or other 12-volt 
trigger-activated equipment, connect it to a 12-volt trigger output as shown in 
Figure 
3-13. 
Figure 3-13. Connecting the 12-Volt Trigger Output to Other Equipment
Connecting to AC PowerThe VX-2 system includes two (2) AC power cords (one each for the projector and DHD 
Controller).
Plug the female end of one power cord into the AC receptacle on...

Page 46

Installation
34 Runco VX-2cx/VX-2dcx Owner’s Operating Manual
PREL
IMINARY
Notes: 

Page 47

Runco VX-2cx/VX-2dcx Owner’s Operating Manual 35 
PREL
IMINARY
4.1 
Turning on the Power
1. Turn on your source components. 
2. Turn on the main power switch at the rear of the projector.
3. Turn on the main power switch at the rear of the DHD Controller.
4. If this is an AutoScope-equipped projector, turn on the main power switch at the rear 
of the AutoScope lens motor. The lens motor power switch is located next to the AC 
input. 
5. Press the ON button on the remote control – or the POWER button on...

Page 48

Operation
36 Runco VX-2cx/VX-2dcx Owner’s Operating Manual
PREL
IMINARY
4.3 
Lens Adjustments
To access the motorized lens controls, select Display Device from the Service Menu, then 
select Lens from the Display Device menu. The Lens menu gives you a great deal of 
control over the picture size, position and focus: 
FocusTo focus the projected image, use the cursor buttons to highlight “In” or “Out.” Then, 
press and hold the ENTER button.
ZoomTo make the picture smaller (zoom out), use the cursor...

Page 49

Operation
Runco VX-2cx/VX-2dcx Owner’s Operating Manual 37 
PREL
IMINARY
4.4 
Using the On-Screen 
Menus
Press the MENU button on either the remote control or the DHD Controller front panel to 
display the Main Menu. 
To select a menu item, use the  and  buttons on either the remote control or the DHD 
Controller front panel to highlight it. Press ENTER to confirm your selection. 
The VX-2 OSD menus are arranged hierarchically, as shown in Figure 4-2.  

Page 50

Operation
38 Runco VX-2cx/VX-2dcx Owner’s Operating Manual
PREL
IMINARY
Figure 4-2. DHD Controller OSD Menu Structure for VX-2
Service
Test VideoGrey Bars 1
Grey Bars 2
Color Bars 1
Color Bars 2
Input Names Rename, Restore or Save
Remote ControlPrimary
Secondary
Display DeviceInstallationPicture Orientation
Lamp Hours (View/Reset)
LensFocus
Zoom
Shift (VX-2c ONLY)
DiagnosticsRed Only
Green Only
Blue Only
75 IRE Color Bars
100 IRE Color Bars
Horiz. Grey Ramp
Vert. Grey Ramp
Checkerboard
Alignment Grid
HD...
Start reading Runco Vx 2dcx Projector User Manual

Related Manuals for Runco Vx 2dcx Projector User Manual

All Runco manuals