Runco Vx 2dcx Projector User Manual

Controls and Functions
Runco VX-2cx/VX-2dcx Owner’s Operating Manual 9 
PREL
IMINARY
2.3 
DHD Controller Front 
Panel
Figure 2-4 shows the controls and indicators on the DHD Controller front panel; the 
paragraphs that follow describe them. 
Figure 2-4. DHD Controller Front Panel
1.RUNCO ICON 
Lights red to indicate that the DHD Controller is in standby mode; lights blue to 
indicate that the unit is on. 
2.POWER BUTTON 
Press once to toggle from standby mode to on mode. Press it again to return to...

Controls and Functions
10 Runco VX-2cx/VX-2dcx Owner’s Operating Manual
PREL
IMINARY
7.ENTER BUTTON 
When an item is highlighted on the On-Screen Display, the ENTER button selects the 
item.
8.DOWN BUTTON 
Use to direct select aspect ratios or move the menu cursor down in the On-Screen 
Display. When no menu is present on-screen, this button toggles you through the 
different aspect ratios, in this order: 
 
Virtualwide 2.35 - Cinema - VirtualWide - Letterbox - Standard (4:3) - Anamorphic
9.RIGHT BUTTON...

Controls and Functions
Runco VX-2cx/VX-2dcx Owner’s Operating Manual 11 
PREL
IMINARY
2.4 
DHD Controller Rear 
Panel
Figure 2-5 shows the rear connector panel on the DHD Controller.
Figure 2-5. DHD Controller Rear Panel
Outputs1.ANALOG OUTPUTS (RGBHV) 
Not used with the VX-2. 
2.DVI OUT 
Connect this to the DHD Input on the VX-2. 
Inputs3.DVI 1 / DVI 2 (Digital) 
Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner 
with a DVI or HDMI output.
4.HD1 / HD2 (5 x Analog BNCs)...

Controls and Functions
12 Runco VX-2cx/VX-2dcx Owner’s Operating Manual
PREL
IMINARY
6.COMPOSITE VIDEO INPUT 
Standard composite video input for connecting a VCR, laser disc player or other 
composite video source.
7.S-VIDEO 1 / S-VIDEO 2 
Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super 
VHS (S-VHS) VCR. 
8.12-VOLT (750 mA) TRIGGER OUTPUTS  
Connection for up to three (3), 12-volt trigger-controlled devices. These can be 
retractable screens, screen masks or the...

Controls and Functions
Runco VX-2cx/VX-2dcx Owner’s Operating Manual 13 
PREL
IMINARY
2.5 
VX-2 Remote Control
Figure 2-6 shows the VX-2 remote control, and the paragraphs that follow describe its 
functionality.
Figure 2-6. VX-2 Remote Control
1212
3
6
8
9 1110
135
7 4 

Controls and Functions
14 Runco VX-2cx/VX-2dcx Owner’s Operating Manual
PREL
IMINARY
1.IR OUTPUT INDICATOR 
Lights when a button is pressed to indicate that an IR signal is being transmitted.
2.ON / OFF 
Press to turn the projector on or off.
3.ENTER 
Press to select a highlighted menu item or confirm a changed setting.
4.Cursor Buttons (, , , )  
Use these buttons to select items or settings, adjust settings or switch display 
patterns.
 
 
When no menus are present on-screen, the UP and DOWN buttons...

Controls and Functions
Runco VX-2cx/VX-2dcx Owner’s Operating Manual 15 
PREL
IMINARY
9.Aspect Ratio Selection Buttons 
Use the red buttons to select an aspect ratio directly or to enter numeric characters, 
as follows: 
 
 
ANA (Anamorphic) (3)  
For viewing 16:9 DVDs or HDTV programs in their native aspect ratio.  
 
4X3 (Standard 4:3) (6)  
Scales the input signal to fit 4:3 display mode in the center of the screen.  
 
LETBOX (Letterbox) (9) 
For viewing LaserDisc movies or non-anamorphic DVDs on a...

Controls and Functions
16 Runco VX-2cx/VX-2dcx Owner’s Operating Manual
PREL
IMINARY
Notes: 

Runco VX-2cx/VX-2dcx Owner’s Operating Manual 17 
PREL
IMINARY
3.1 
Remote Control
To install batteries in the remote control, 
press up on the battery cover retainer clip 
and lift off the cover. Install the two AAA 
batteries with the correct polarity and then 
replace the cover. 
Notes on Batteries Make sure that the battery polarities are correct when installing the batteries.
 Do not mix an old battery with a new one or different types of batteries.
 If you will not use the remote control for a...

Installation
18 Runco VX-2cx/VX-2dcx Owner’s Operating Manual
PREL
IMINARY
3.2 
Quick Setup
Table 3-1 gives a quick overview of the VX-2 installation process. The sections following 
this one provide detailed instructions. 
Installation should be performed by a qualified custom video 
installation specialist.
Table 3-1. Installation Overview 
StepProcedureFor Details, Refer to 
page...
1Choose a location for the projector19
2Install CineWide (secondary anamorphic) lens (optional)25
3Connect the DHD...