Runco Vx 22i Projector User Manual

Runco VX-22i Installation/Operation Manual 7 
PREL
IMINARY
5.LEFT BUTTON 
Used to direct-select inputs or move the menu cursor left in the OSD. When no menu 
is present on-screen, the LEFT button toggles through the different sources, in this 
order: 
 
HDMI 2 - HDMI 1 - HD3 (VGA/Y-Pb-Pr) - HD 2 (BNC) - HD 1 (RCA) - S-Video - 
Composite (VID)
6.UP BUTTON 
Use to direct-select aspect ratios or move the menu cursor up in the OSD. When no 
menu is present on-screen, the UP button toggles through aspect...

8 Runco VX-22i Installation/Operation Manual
PREL
IMINARY
2.3 
VX-22i Rear Connector 
Panel
Figure 2-3 shows the rear connector panel on the VX-22i, and the paragraphs that follow 
describe them.
Figure 2-3. Rear Connector Panel
1.HD2 INPUT 
Five BNCs for connecting either RGB or component high-definition sources (up to 
1080p). The VX-22i automatically detects the input signal resolution.
2.HD1 INPUT 
Five RCA-type connectors for either RGB or component high-definition sources (up to 
1080p). The VX-22i...

Runco VX-22i Installation/Operation Manual 9 
PREL
IMINARY
7.HDMI I (1) / HDMI II (2) (Digital) 
Two, HDCP-compliant digital video inputs for connecting a DVD player, HD tuner or 
other digital video source (up to 1080p) with a DVI or HDMI output.
8.HD3 INPUT 
Provides a standard, 15-pin VGA-style connection to either an RGB or component 
high-definition source, or to a personal computer. The VX-22i automatically detects 
the input signal resolution.
9.COMPOSITE VIDEO INPUT 
Standard composite video...

10 Runco VX-22i Installation/Operation Manual
PREL
IMINARY
2.4 
VX-22i Remote Control
Figure 2-4 shows the VX-22i remote control, and the paragraphs that follow describe its 
functionality.
Figure 2-4. VX-22i Remote Control
FOCUS   LENSZOOM
LIGHT
OFF ON
VID S-VID HDMI1
HD2SOURCE
PICTURE MEMORY
ASPECT RATIO
HD1
INFO
ENTER
EXIT MENU
BRT
CUST1 CUST2CONT COL TINTHD3HDMI2
ISF
DAY ISF
NIGHT
16:9VWIDE LBOX 4:3
CINEMA
VCINE
FOCUSZOOM
2
1
5
46 3
9
80 7
LENS
6
1
52
4 3
8
7
9 

Runco VX-22i Installation/Operation Manual 11 
PREL
IMINARY
1.LIGHT  
Press to illuminate the buttons. 
2.ON / OFF 
Use these buttons to turn the projector on or off.
3.Source Selection Buttons: 
 
VID 
Press to select Composite video input as the source.  
 
S-VID (S-Video) 
Press to select the S-Video input as the source.  
 
HDMI 1 (I) / HDMI 2 (II) 
Press to select an HDMI input.  
 
HD 1 / HD 2 / HD 3 
Press to select the HD 1 (RCA), HD 2 (BNC) or HD 3 (PC) video input as the source. 
4.INFO 
Press...

12 Runco VX-22i Installation/Operation Manual
PREL
IMINARY
6.Memory Preset Buttons: 
 
CUST1 
Press to recall settings for the current input from the “Custom 1” memory preset.  
 
ISF NIGHT 
Press to recall settings for the current input from the “ISF Night” memory preset.  
 
ISF DAY 
Press to recall settings for the current input from the “ISF Day” memory preset. 
 
CUST2 (THX) 
Press to recall settings for the current input from the “THX” memory preset. 
7.Aspect Ratio Selection Buttons 
Use these...

Runco VX-22i Installation/Operation Manual 13 
PREL
IMINARY
3.1 
Remote Control
To install batteries in the remote control, 
press up on the battery cover retainer clip 
and lift off the cover. Install the two AAA 
batteries with the correct polarity and then 
replace the cover. 
Notes on Batteries Make sure that the battery polarities are correct when installing the batteries.
 Do not mix an old battery with a new one or different types of batteries.
 If you will not use the remote control for a long...

14 Runco VX-22i Installation/Operation Manual
PREL
IMINARY
3.2 
Quick Setup
Table 3-1 gives a quick overview of the VX-22i installation process. The sections following 
this one provide detailed instructions. 
Installation should be performed by a qualified custom video 
installation specialist.
Table 3-1. Installation Overview 
StepProcedureFor Details, Refer to 
page...
1Choose a location for the projector15
2If installing a VX-22i/CineWide or VX-22i/CineWide 
with AutoScope: 
Install fixed CineWide...

Runco VX-22i Installation/Operation Manual 15 
PREL
IMINARY
3.3 
Installation 
Considerations
Proper installation of your projector will ensure the quality of your display. Whether you are 
installing a projector temporarily or permanently, you should take the following into 
account to ensure your projector performs optimally.
Installation TypeChoose the installation type that best suits your needs: front or rear screen, floor mount or 
inverted mount. 
Table 3-2 compares these various installation...

16 Runco VX-22i Installation/Operation Manual
PREL
IMINARY
Throw DistanceThrow distance is the distance measured from the front of the projector to the screen. 
This is an important calculation in any projector installation as it determines whether or not 
you have enough room to install your projector with a desired screen size and if your 
image will be the right size for your screen.
You can quickly estimate the throw distance by taking the width of the screen and 
multiplying it by the lens throw...