Runco Vx 22d Projector User Manual

Controls and Functions
Runco VX-22d Owner’s Operating Manual 9 
PREL
IMINARY
6.DOWN BUTTON 
Use to direct-select aspect ratios or move the menu cursor down in the OSD. When 
no menu is present on-screen, the DOWN button toggles through the different aspect 
ratios, in this order: 
 
Virtual Cinema - Cinema - VirtualWide - Letterbox - 4:3 - 16:9
7.RIGHT BUTTON 
Used to direct-select inputs or move the menu cursor right in the OSD. When no 
menu is present on-screen, the RIGHT button toggles through the...

Controls and Functions
10 Runco VX-22d Owner’s Operating Manual
PREL
IMINARY
2.4 
DHD Controller Rear 
Panel
Figure 2-4 shows the rear connector panel on the DHD Controller.
Figure 2-4. DHD Controller Rear Panel
1.POWER INPUT (100 to 240 VAC) 
Connect the DHD Controller to power here. 
2.MAIN AC FUSE 
This is the main AC input fuse (5mm x 20mm, 500 mA, 250V slow-blow). 
3.MAIN POWER SWITCH 
Disconnects or applies power to the DHD Controller.
4.DVI-DL (DUAL-LINK) OUTPUT (1080p) 
Connect this to the DHD...

Controls and Functions
Runco VX-22d Owner’s Operating Manual 11 
PREL
IMINARY
8.12-VOLT (750 mA) TRIGGER OUTPUTS  
Connection for up to three (3), 12-volt trigger-controlled devices. These can be 
retractable screens, screen masks or the Runco CineWide with AutoScope system.
9.HDMI I (1) / HDMI II (2) (Digital) 
Two, HDCP-compliant digital video inputs for connecting a DVD player, HD tuner or 
other digital video source (up to 1080p) with a DVI or HDMI output.
10.HD3 INPUT 
Provides a standard, 15-pin...

Controls and Functions
12 Runco VX-22d Owner’s Operating Manual
PREL
IMINARY
2.5 
VX-22d Remote 
Control
Figure 2-5 shows the VX-22d remote control, and the paragraphs that follow describe its 
functionality.
Figure 2-5. VX-22d Remote Control
FOCUS   LENSZOOM
LIGHT
OFF ON
VID S-VID HDMI1
HD2
HD1
INFO
ENTER
EXIT MENU
BRT
CUST1 CUST2CONT COL TINTHD3HDMI2
ISF
DAY ISF
NIGHT
16:9VWIDE LBOX 4:3
CINEMA
VCINE
FOCUSZOOM
2
1
5
46 3
9
80 7
LENS
1
42
3
5
7 6
8
9 

Controls and Functions
Runco VX-22d Owner’s Operating Manual 13 
PREL
IMINARY
1.LIGHT  
Press to illuminate the buttons. 
2.ON / OFF 
Use these buttons to turn the projector on or off.
3.Source Selection Buttons: 
 
VID 
Press to select Composite video input as the source.  
 
S-VID (S-Video) 
Press to select the S-Video input as the source.  
 
HDMI 1 (I) / HDMI 2 (II) 
Press to select an HDMI input.  
 
HD 1 / HD 2 / HD 3 
Press to select the HD 1 (RCA), HD 2 (BNC) or HD 3 (PC) video input as the...

Controls and Functions
14 Runco VX-22d Owner’s Operating Manual
PREL
IMINARY
6.Memory Preset Buttons: 
 
CUST1 
Press to recall settings for the current input from the “Custom 1” memory preset.  
 
ISF NIGHT 
Press to recall settings for the current input from the “ISF Night” memory preset.  
 
ISF DAY 
Press to recall settings for the current input from the “ISF Day” memory preset. 
 
CUST2 
Press to recall settings for the current input from the “Custom 2” memory preset. 
7.Aspect Ratio Selection...

Runco VX-22d Owner’s Operating Manual 15 
PREL
IMINARY
3.1 
Remote Control
To install batteries in the remote control, 
press up on the battery cover retainer clip 
and lift off the cover. Install the two AAA 
batteries with the correct polarity and then 
replace the cover. 
Notes on Batteries Make sure that the battery polarities are correct when installing the batteries.
 Do not mix an old battery with a new one or different types of batteries.
 If you will not use the remote control for a long time,...

Installation
16 Runco VX-22d Owner’s Operating Manual
PREL
IMINARY
3.2 
Quick Setup
Table 3-1 gives a quick overview of the VX-22d installation process. The sections 
following this one provide detailed instructions. 
Installation should be performed by a qualified custom video 
installation specialist.
Table 3-1. Installation Overview 
StepProcedureFor Details, Refer to 
page...
1Choose a location for the projector17
2Install the primary projection lens22
3If installing an VX-22d/CineWide with...

Installation
Runco VX-22d Owner’s Operating Manual 17 
PREL
IMINARY
3.3 
Installation 
Considerations
Proper installation of your projector will ensure the quality of your display. Whether you are 
installing a projector temporarily or permanently, you should take the following into 
account to ensure your projector performs optimally.
Installation TypeChoose the installation type that best suits your needs: front or rear screen, floor mount or 
inverted mount. 
Table 3-2 compares these various...

Installation
18 Runco VX-22d Owner’s Operating Manual
PREL
IMINARY
Throw DistanceThrow distance is the distance measured from the front of the projector to the screen. 
This is an important calculation in any projector installation as it determines whether or not 
you have enough room to install your projector with a desired screen size and if your 
image will be the right size for your screen.
You can quickly estimate the throw distance by taking the width of the screen and 
multiplying it by the lens...