Runco Sc 1 Projector User Manual

Runco SC-1 Owner’s Operating Manual 69 
PREL
IMINARY
4.1 
Using the On-Screen 
Menus
Press the MENU button on either the remote control or the DHD Controller front panel to 
display the Main Menu. 
To select a menu item, use the  and  buttons on either the remote control or the DHD 
Controller front panel to highlight it. Press ENTER to confirm your selection. 
The SC-1 OSD menus are arranged hierarchically, as shown in Figure 4-1. Depending on 
the selected input source and signal characteristics, some...

Operation
70 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
Figure 4-1. DHD Controller OSD Menu Structure for SC-1
Service
Test VideoGrey Bars 1
Grey Bars 2
Color Bars 1
Color Bars 2
Input Names Rename, Restore or Save
Remote ControlPrimary
Secondary
Analog Out Mode RGB--, RGB++ or RGBS
Display Device - ConfigureInstallationPicture Orientation
Keystone
Lamp Hours (read-only) 
Auto Setup
HD FormatHD/RGB 1
Auto, RGB or YUV
HD/RGB 2
ADC Bandwidth Auto, 75 MHz, 150 MHz or 300 MHz
YPbPr Input Resolution...

Operation
Runco SC-1 Owner’s Operating Manual 71 
PREL
IMINARY
Main MenuThe Main Menu is the starting point for accessing all projector functions. 
(The Calibration and Service menus are hidden and not accessible until you enter a 
passcode.) 
Input SourceFrom the Main Menu, select Input Source to choose a video signal source. 
The active source is indicated by an arrow (>) to its left; in this example, Composite is the 
active source. 
Aspect Ratio To change the aspect ratio (size and shape) of the...

Operation
72 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
Table 4-1. Aspect Ratio Settings 
Aspect Ratio
Remote 
Control
Key
Description
AnamorphicANASelect Anamorphic to view 
16:9 DVDs and HDTV 
programs in their native 
aspect ratio. 
4:3 images are stretched 
horizontally to fit a 16:9 
screen. 
Standard 4:34X34:3 scales the input signal to 
fit in the center of the 16:9 
screen. 4:3 is the aspect ratio 
used by computer monitors, 
standard television 
programming and most VHS 
video cassettes....

Operation
Runco SC-1 Owner’s Operating Manual 73 
PREL
IMINARY
VirtualWideV-WIDEVirtualWide scales a 4:3 
image NON-linearly (more on 
the sides than in the center) 
to fit a 16:9 screen. 
 
 
 
 
 
 
 
 
 
On a 2.35:1 screen, the 
image is centered between 
black bars on either side. 
CinemaCINEMASelect Cinema to view 2.35 
source material in its native 
aspect ratio.
With a 16:9 screen and a 
non-CineWide projector (no 
anamorphic lens), the upper 
and lower portions of the 
screen are masked, but the...

Operation
74 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
PictureUse the controls in the Picture Menu to calibrate your SC-1 for optimum picture quality.
The SC-1 has been designed to incorporate setup and calibration standards established 
by the Imaging Science Foundation (ISF). The ISF has developed carefully crafted, 
industry-recognized standards for optimal video performance and has implemented a 
training program for technicians and installers to use these standards to obtain optimal 
picture...

Operation
Runco SC-1 Owner’s Operating Manual 75 
PREL
IMINARY
Although it may be possible to obtain satisfactory picture quality using the naked eye and 
regular program material, Runco recommends using the following calibration tools for best 
results: 
 External test pattern source – Ovation Multimedia, Digital Video Essentials or AVIA test 
DVD or equivalent.
 A blue filter (provided with many test DVDs), for color level and tint adjustments.
Connect your test pattern source to the input that you are...

Operation
76 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
Contrast: On your external test pattern source, select a stepped, gray-bar pattern like the 
one shown in 
Figure 4-3. 
Figure 4-3. Typical Gray Bar Pattern for Adjusting Contrast
Select Contrast and press ENTER. Adjust the contrast to a point just below which the 
white rectangle starts to increase in size.
Color Saturation: On your external test pattern source, select a color bar pattern like the 
one shown in 
Figure 4-4. 
Figure 4-4....

Operation
Runco SC-1 Owner’s Operating Manual 77 
PREL
IMINARY
Select Color and press ENTER. While looking at the color bar pattern through a blue filter, 
adjust the color saturation level until the outermost (gray and blue) color bars appear to be 
a single shade of blue: 
Tint: Tint or “hue” is essentially the ratio of red to green in the color portion of the image. 
When tint is decreased, the image appears redder; when it is increased the image 
appears greener. To set the tint, select Tint and...

Operation
78 Runco SC-1 Owner’s Operating Manual
PREL
IMINARY
Sharpness: “Sharpness” is the amount of high-frequency detail in the image. To adjust 
sharpness, select Sharpness from the Picture menu and press ENTER. On your external 
test pattern source, select a pattern like the one shown in 
Figure 4-5. Adjust as needed, 
looking for white edges around the transitions from black to gray and differently-sized lines 
in the “sweep” patterns at the top and bottom. Lower the sharpness setting to eliminate...