Runco Rs 900 Projector User Manual
Have a look at the manual Runco Rs 900 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 123 Runco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Table of Contents Runco RS-900 Owner’s Operating Manual xi PREL IMINARY 5.Maintenance and Troubleshooting ........................................................................ 65 Lamp Replacement .................................................................................................... 65 Troubleshooting Tips .................................................................................................. 66 6.Serial Communications .......................................................................................... 69 RS-232 Connection and Port Configuration ............................................................... 69 Serial Command Syntax ............................................................................................. 69 7.Specifications .......................................................................................................... 73 RS-900 Specifications ................................................................................................ 73 RS-900 Dimensions ................................................................................................... 76 RS-900/CineWide Dimensions ................................................................................... 77 RS-900/CineWide with AutoScope Dimensions .......................................................... 78 Supported Timings ..................................................................................................... 79
Table of Contents xii Runco RS-900 Owner’s Operating Manual PREL IMINARY Notes:
Runco RS-900 Owner’s Operating Manual xiii 1List of Figures PREL IMINARY 2-1. RS-900 Front/Side/Top View........................................................................................ 5 2-2. RS-900 Rear/Bottom/Side View ................................................................................... 7 2-3. RS-900 Rear Panel....................................................................................................... 8 2-4. RS-900 Remote Control ............................................................................................. 10 3-1. Estimating Throw Distance ......................................................................................... 18 3-2. Projector Placement ................................................................................................... 19 3-3. Vertical Lens Shift (Example Only) ............................................................................... 20 3-4. Folded Optics .............................................................................................................21 3-5. RS-900/CineWide with AutoScope Motor Assembly – Exploded View ........................ 22 3-6. RS-900 with Ceiling Mount Adapters/Projector Stands............................................... 23 3-7. AutoScope Lens Motor Installation ............................................................................. 24 3-8. RS-900/CineWide with Whitney (Prismatic) Lens Base Plate and Ceiling Mounting Plate - Bottom View ............................................................................................................. 25 3-9. RS-900/CineWide with Rainier II/McKinley (Cylindrical) Lens Base Plate and Ceiling Mounting Plate - Exploded View .................................................................................. 26 3-10. HDMI/DVI Source Connections ................................................................................ 29 3-11. RGB Connections .................................................................................................... 30 3-12. Progressive Component Video Connections ............................................................. 30 3-13. Composite, S-Video and Component Video Connections......................................... 31 3-14. RS-232 Control System Connection ......................................................................... 32 3-15. Connecting the 12-Volt Trigger Output to the AutoScope Lens Motor ...................... 33 3-16. Connecting the 12-Volt Trigger Output to Other Equipment...................................... 33 3-17. RS-900 Anamorphic Lens Mounting Assembly - Exploded View .............................. 37 3-18. Attaching the Anamorphic Lens to the Lens Ring ..................................................... 38 3-19. Standard RS-900 Anamorphic Lens Mounting Assembly - Exploded View ............... 42 4-1. RS-900 OSD Menu Structure ..................................................................................... 47 4-2. Typical PLUGE Pattern for Adjusting Brightness ......................................................... 49 4-3. Typical Gray Bar Pattern for Adjusting Contrast .......................................................... 50 4-4. Typical Color Bar Pattern for Adjusting Color Saturation and Tint................................ 51 4-5. Typical Test Pattern for Adjusting Sharpness .............................................................. 52 4-6. Keystone Correction ................................................................................................... 56 4-7. Pincushion Correction ................................................................................................ 57 4-8. Gain and Offset .......................................................................................................... 61 4-9. CIE 1931 Chromaticity Diagram ................................................................................. 63
List of Figures xiv Runco RS-900 Owner’s Operating Manual PREL IMINARY 7-1. RS-900 Dimensions ................................................................................................... 76 7-2. RS-900/CineWide Dimensions (with Whitney Anamorphic Lens) ................................. 77 7-3. RS-900/CineWide with AutoScope Dimensions .......................................................... 78
Runco RS-900 Owner’s Operating Manual 1 PREL IMINARY 1.1 About This Manual This Owner’s Manual describes how to install, set up and operate the Runco RS-900 Digital Light Processing (DLP™) Projector. Throughout this manual, the Runco RS-900 DLP Projector is referred to as the “RS-900.” Target AudienceRunco has prepared this manual to help home theater installers and end users get the most out of the RS-900. Runco has made every effort to ensure that this manual is accurate as of the date it was printed. However, because of ongoing product improvements and customer feedback, it may require updating from time to time. You can always find the latest version of this and other Runco product manuals on-line, at www.Runco.com. If You Have Comments About This Manual... Runco welcomes your comments about this manual. Send them to [email protected]. Textual and Graphic Conventions Text Conventions: The following conventions are used in this manual, in order to clarify the information and instructions provided: Remote and built-in keypad button identifiers are set in upper-case bold type; for example, “Press EXIT to return to the previous menu.” Computer input (commands you type) and output (responses that appear on-screen) is shown in monospace (fixed-width) type; for example: “To select the Component 1 input, type X133X.” All keys with functional names are initial-capped, set in bold type and enclosed in angle brackets. These keys are the following: , , , and . indicates that you may press either the RETURN or ENTER key on your keyboard if it has both keys. In addition to these conventions, underlining, boldface and/or italics are occasionally used to highlight important information, as in this example: 1. Introduction A carriage return must be used after each command or string.Note
Introduction 2 Runco RS-900 Owner’s Operating Manual PREL IMINARY Graphic Conventions: These symbols appear in numerous places throughout the manual, to emphasize points that you must keep in mind to avoid problems with your equipment or injury: 1.2 Using This Manual Use the following table to locate the specific information you need in this manual. TIPS highlight time-saving short cuts and helpful guidelines for using certain features. NOTES emphasize text with unusual importance or special significance. They also provide supplemental information. CAUTIONS alert users that a given action or omitted action can degrade performance or cause a malfunction. WARNINGS appear when a given action or omitted action can result in damage to the equipment, or possible non-fatal injury to the user. DANGER appears when a given action can cause severe injury or death. Note Caution WARNING DANGER! If you need...... Turn to page: Information about obtaining serviceiv General information about the RS-900 DLP Projector3 Installation instructions15 First-time configuration instructions 35 Advanced configuration instructions59 Troubleshooting tips66 Specifications for the RS-900 DLP Projector 73
Introduction Runco RS-900 Owner’s Operating Manual 3 PREL IMINARY 1.3 Description, Features and Benefits The RS-900 DLP Projector offers the astounding picture quality and versatility heretofore associated with more expensive projectors. Their 1920 x 1080 native resolution DLP light engine features Runcos powerful SuperOnyx™ technology for bright, pristine high-definition (1080p) images. Contrast ratio and dynamic range extend to new heights with Runcos exclusive, electronically-controlled iris system. The RS-900 is equipped with a precision optics package featuring electronic lens shift and a throw range of 1.87 to 2.20 times the screen width. The RS-900s illumination system provides two light intensity levels to allow maximum flexibility for screen size, ambient light conditions, brightness and contrast balance, and lamp life preservation. It also has a newly refined cooling system, which increases efficiency and reduces noise levels. The RS-900 has been engineered to comply with Imaging Science Foundation™ (ISF) standards for maximum home theater image quality. Runcos sophisticated parameters for white balance and color gamut control have also been implemented for precise balance of gray scale and color. The RS-900 incorporates Runco-proprietary de-interlacing technology that provides exceptional scaling and film-to-video (3:2 pulldown) conversion for the most artifact-free images possible. For uncompromising widescreen reproduction of movies originally filmed in the “scope” (2.35:1) format, the RS-900 can be equipped with Runco’s patent-pending CineWide™ technology, a combination of software, electronics and high-quality anamorphic optics. CineWide maintains constant vertical height on the screen just as in a movie theater. When a viewer transitions from 1.78:1 (16:9) program material to 2.35:1, the image simply gets wider while full height is maintained. Also available with the RS-900 is CineWide with AutoScope™, an enhanced, remote-controlled motorized version of CineWide. Discrete IR and RS-232 control make custom installation seamless, while discrete source and aspect ratio selection accommodate any automation control system. CineWide requires the use of a 2.35:1 or similar aspect ratio superwide format screen.Note
Introduction 4 Runco RS-900 Owner’s Operating Manual PREL IMINARY Key Features and BenefitsThe RS-900 offers these key features and benefits: Native Resolution: 1920 x 1080 (16:9 Native Aspect Ratio) DLP system using SuperOnyx™ Digital Micromirror Device (DMD) 7-segment color wheel produces wide dynamic range and rich grayscale Reflectance Volume Regulation (RVR™) provides for infinitely variable adjustment of the light path through the optics, enabling the perfect balance of black and white levels for each individual installation Picture in Picture function allows you to display two inputs on the screen at the same time Two (2) HDMI Inputs with High-bandwidth Digital Content Protection (HDCP) HDTV Compatible Parts ListYour RS-900 is shipped with the following items. If any items are missing or damaged, please contact your Runco dealer or Runco Customer Service at (800) 23-RUNCO. RS-900 DLP Projector Remote Control Unit and two (2), AAA-size batteries AC Power Cords (North America, Europe, United Kingdom), 8.2 feet (2.5 meters) Source Connection Cables, 9.8 feet (3.0 meters): Component Video RGB (DB15HD to 5xBNC) HDMI to DVI-D Serial Communication Cable (D-sub 9-pin female to RJ-11 male), 9.8 feet (3.0 meters) Warranty information and registration card Runco RS-900 Owner’s Operating Manual (this document) Optional Accessories: CineWide™ technology (fixed, secondary anamorphic lens) Ceiling mount kit (part number RUHK-004860) CineWide™ with AutoScope™ system (secondary anamorphic lens and motorized mount) ➤ ➤
Runco RS-900 Owner’s Operating Manual 5 PREL IMINARY 2.1 RS-900 at a Glance Figure 2-1 and Figure 2-2 show the key RS-900 components. Figure 2-1. RS-900 Front/Side/Top View 1.EXHAUST VENT 2.ZOOM TAB Use this to change the projected image size. 3.TOP IR SENSOR 2Controls and Functions 12 3 4 5 678910
Controls and Functions 6 Runco RS-900 Owner’s Operating Manual PREL IMINARY 4.TEMP LED Indicates fan status and internal temperature as follows: Off during normal operation Red when internal temperature is too high or a fan failure occurs 5.INTAKE VENT 6.POWER/STANDBY LED Indicates power status as follows: Orange when the projector is in standby mode Flashes green for approximately 45 seconds after the projector is turned on to indicate that the lamp is warming up Green during normal operation Flashes orange for approximately 110 seconds after the projector is turned off to indicate that the lamp is cooling down Red when an internal failure requiring service has occurred 7.LAMP LED Indicates lamp status as follows: Off during normal operation Red when the lamp has exceeded its usage life or developed a problem 8.RUNCO LOGO The logo can be rotated to match the projector orientation: inverted (ceiling-mounted) or upright. To rotate the logo, grip it at the sides, pull it away from the projector and rotate it 180 degrees. 9.FRONT IR SENSOR 10.PROJECTION LENS To adjust the focus, grasp the lens by the outer ring and rotate it.