Runco Cp 52hd Installation And Operation Manual

            Runco CP-42HD/CP-52HD Owner’s Operating Manual  7   
 
 
Controls and Functions 
 
Figure 2-2 shows the Climate series Input and Output Interfaces. 
 
Figure 2-2. Climate Series LCD Input/Output Interfaces 
1. HDMI 1 (Digital) 
HDCP-compliant digital video inputs for connecting an HDMI or DVI source. 
2. HDMI 2 (Digital) 
HDCP-compliant digital video inputs for connecting an HDMI or DVI source. 
3. RS-232 
A female, 9-pin D-sub connector for interfacing with a PC or home theater...

8                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
Controls and Functions 
 
 
8. VIDEO INPUT (Composite or S-Video + Stereo Audio) 
Standard, composite or S-video input and stereo audio input for connecting a 
VCR, camcorder, laser disc player, Super VHS (S-VHS) VCR or other 
composite or S-video source. 
9. DIGITAL AUDIO OUTPUT 
Connects the TV audio out to the digital audio input of an amplifier. 
10. SPEAKER OUTPUT (LEFT + RIGHT) 
For connecting external speakers with an...

            Runco CP-42HD/CP-52HD Owner’s Operating Manual  9   
 
 
Controls and Functions 
 
 
Figure 2-3 shows the Climate Series LCD remote control, and the paragraphs 
that follow describe its functionality. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 2-3. Climate Series LCD Remote Control 
 
2.2  
Climate Series LCD 
Remote Control 
 

10                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
Controls and Functions 
1. REMOTE SENSOR 
2. SOUND MODE 
Press this button to select sound mode, Standard, Music, Movie, or Personal. 
3. DISPLAY INFORMATION 
Press this button to view input signal information (source and resolution). 
4. MUTE ON/OFF 
Press this button to mute the audio output to the speakers. 
5. MTS 
Press this button to scroll through the available MTS settings. 
6. VOLUME UP 
Use this button to increase sound...

            Runco CP-42HD/CP-52HD Owner’s Operating Manual  11   
 
 
Controls and Functions 
25. COMPOSITE 
Press to select the Composite input as the source. 
26. T.V 
Press this button to switch to the antenna/DTV/CATV input. 
27. S-VIDEO BUTTON 
Press to select the S-Video input as the source. 
28. VGA BUTTON 
Press to select the VGA input as the source. 
29. DIGITAL BUTTON 
Press this button to switch to the Digital Video input. 
30. ASPECT BUTTON 
Use this button to select Normal, Wide, Zoom, or...

12                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
3. Installation 
 
 
 
For the first time use of the remote control, please pull out the PET Film. 
 
 
 
 
 
 
 
 
To change the battery in the remote control: 
1. Remove the six screws on the back of the remote. 
2. Remove the battery and replace with another Lithium CR2032 Battery. 
3. Please follow the drawing to remove the screws and replace the battery. 
 
  
 Make sure that there is nothing obstructing the infrared beam...

            Runco CP-42HD/CP-52HD Owner’s Operating Manual  13   
 
 
Installation 
 
Table 3-1 gives a quick overview of the Climate Series LCD installation process. 
The sections following this one provide detailed instructions. 
 
Installation should be performed by a qualified custom video 
installation specialist. 
 
Table 3-1. Installation Overview 
Step Procedure For Details, Refer 
to page… 
1 Mount the Climate Series LCD on a wall 
(optional) 14 
2 Connect signal sources to the Climate Series...

14                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
Installation 
 
Proper installation of your Climate Series LCD will ensure the highest possible 
picture quality. Whether you are installing the Climate Series LCD temporarily or 
permanently, you should take the following into account to ensure that it performs 
optimally. 
 
You can either place the Climate Series LCD on a table or in an entertainment 
center, or mount it on a wall. 
If you do decide to wall-mount the Climate...

            Runco CP-42HD/CP-52HD Owner’s Operating Manual  15   
 
 
Installation 
Connect your video sources to the Climate Series LCD as shown and described 
in the sections that follow. 
HDMI Connections: The Climate Series LCD has two HDMI inputs for 
connecting a BD/HD-DVD/DVD player, DTV decoder, personal computer or any 
other device with an HDMI or DVI output. Connect such devices as shown in 
Figure 3-1. 
Use the HDMI inputs whenever possible. This ensures the 
highest video quality because the...

16                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
Installation 
 
RGB Connections: The Climate Series LCD has an RGB input and a stereo 
audio input for connecting a personal computer; see Figure 3-2. 
 
 
Figure 3-2. Analog RGB Connections 
 
1. Refer to Supported Timings on page xx for a list of computer signals compatible 
with the Climate Series LCD. Use with signals other than those listed may cause 
some functions not to work. 
2. Some Macintosh computers may require a...