Runco Cp 52hd Installation And Operation Manual

							Runco CP-42HD/CP-52HD Owner’s Operating Manual            i                       
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
CP-42HD 
CP-52HD 
Climate Series High Definition LCD Monitor 
 
 
 
   
						

							ii                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
						

							            Runco CP-42HD/CP-52HD Owner’s Operating Manual  iii   
 
 
RuncoCare
TM
 One Year Limited Warranty 
For North America 
 
Congratulations on your purchase of a Runco® product!  With proper installation, setup and care, you should enjoy many 
years of unparalleled video performance.   
 
This  RuncoCare One  Year Limited  Warranty  is  provided  free  of  charge  by  Runco  International,  LLC  (“Runco”)  with  the 
purchase of a covered Runco product.  
 
The  following  terms  and  conditions of  the  RuncoCare One  Year Limited  Warranty  represent  a  contract  between  us, 
Runco,  and  you,  the  customer,  who  has  purchased  a  Runco  product.  This  contract  applies  to  purchases  of  covered 
Runco products occurring on  or after the  effective  date printed at the  bottom  of this  document.  Runco  reserves  the right 
to change the terms of this contract, and such changes shall apply to purchases of covered Runco products that occur on 
or after any future effective date. 
 
 
 
 
 1-Year protection from defects in material and workmanship 
 Access to 24x7 phone support 
 Complimentary, 2nd day one-way shipping 
 
 
 
Runco  warrants  its  products  to  be  free  from  defects  in  material  and  workmanship  during  the  warranty  period  provided 
below.  If, in Runco‟s sole determination, a product proves to be defective in material or workmanship during the warranty 
period, Runco will repair the product, replace the product with a substantially similar new or like new product, or refund a 
prorata  share  of  the  purchase  price  (calculated  based  on  the  remainder  of  the  warranty  period  and  the  then-current 
MSRP2 of a similar product), if repair or replacement of the product is determined by Runco to not be feasible.  Runco has 
sole  discretion  in  determining  whether  a  same  or  like  model  is  offered,  and what  constitutes  as „substantially  similar 
model‟. 
 
 
 
Runco  products  are  warranted  for  one  (1)-year  from  the  date  of  shipment  from  Runco.    Lamps  are  warranted  six  (6) 
months  from  the  date  of  shipment  or  1000  hours  of  use,  whichever  comes  first.    All  other accessories,  which  include  but 
are  not  limited  to,  cables,  remotes,  carrying  cases,  lens  cap  and  other  peripherals  sold  with  the  Runco  product,  are 
warranted for ninety (90) days from the date of the original shipment of the accessory.  
 
 
 
 
This  RuncoCare One  Year Limited  Warranty  is  valid  only  for  the  first  customer  who  purchases  the  covered  product  from 
an  authorized  Runco  dealer  or  distributor.    This  warranty  is  not  transferable.    You  may  be  required  to  provide  proof  of 
purchase in order to receive warranty services. 
 
1. Runco may update this list of products excluded from this warranty from time to time at Runco’s sole discretion, but updates to the list of 
covered products will not apply on a retroactive basis. 2. MSRP is defined as the most recent product price listed on Runco’s price list. 
 
RuncoCare 1 Year Limited Warranty Features 
Warranty Coverage 
Length of Warranty 
Eligibility 
 
						

							iv                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
 
 
In the event of a product defect, please follow the warranty claim procedure provided below: 
 The customer is required to contact a Runco dealer or Runco Technical Support via email at [email protected] or 
via phone at (toll free) 800-23-RUNCO (800-237-8626).  If the customer is located outside North America, call +3589 
4200 554 in Europe for product service.  
 Be prepared to provide the date of purchase, the place of purchase, serial number, product model number, 
description of the problem and troubleshooting steps already attempted.   
 Runco Technical Support staff will attempt to correct any minor issues that may be causing the problem.  If Runco is 
unable to resolve the problem through troubleshooting, a Return Material Authorization (RMA) number will be issued 
for the exchange of the defective product if it is determined that the claim was made within the coverage period of the 
Standard Limited Warranty.   
 If it is determined that the Standard Limited Warranty applies to the claim, the customer will need to return the 
defective product to the Runco repair depot location specified by the Runco technical support representative.  The 
customer will need to properly package the defective product, consisting of the product only, and not include any 
accessories (e.g., cables, remotes, carrying cases, lens, lens cap and other peripherals) and return it to the Runco 
repair depot specified by the technical support representative.  It is the customer‟s responsibility to properly package 
the hardware, include all appropriate materials, and return it to the location specified by the Runco technical support 
department.  The customer will need to address and resolve any shipping damage claims directly with the shipping 
company. 
 The customer is responsible for providing a suitable box to ship the defective product to an authorized Runco repair 
depot.  Boxes may be purchased from a Runco technical support representative. 
 The customer is responsible for paying freight charges to ship the defective product to an authorized Runco repair 
depot. 
 For in-warranty repairs, Runco will pay freight charges to return the repaired/replacement product (which shall not 
include accessories--e.g., cables, remotes, carrying cases, lens cap and other peripherals sold with the Runco 
product) to the customer from the Runco repair depot. 
 Once an RMA has been created, the customer may contact [email protected] for follow-up questions or 
confirmation status of the claim process. 
 
 
This RuncoCare Standard Limited Warranty does not include or is limited by the following: 
1. Products not purchased from an authorized Runco dealer  
2. Rental costs incurred by the customer in the event of product defect or failure 
3. Any product with a defaced, modified, or removed serial number   
4. Damage, deterioration, or malfunction resulting from: 
a. Accident,  abuse,  misuse,  neglect,  improper  ventilation,  fire,  water,  disaster,  lightning,  or  other  acts  of  nature, 
smoke  exposure  (cigarette  or  otherwise),  unauthorized  product  modification (including  use  of  an  unauthorized 
mount), or failure to follow instructions supplied with the product 
b. Repair or attempted repair by anyone not authorized by Runco 
c. Any damage to the product due to shipment 
d. Removal or installation of the product 
e. Causes external to the product, such as electric power fluctuations or failure 
f. Use  of  supplies  or  parts  (including  lamps)  that  are  not  purchased  from  Runco  or  do  not  meet  Runco‟s 
specifications 
g. Normal wear and tear 
h. Expected lamp degradation and normal decrease in lamp output over a period of time or as the lamp is consumed 
i. Customer caused defects, including but not limited to, scratched/defaced/altered plastics 
j. Failure to follow maintenance procedures as outlined in the product‟s user guide where a schedule is specified for 
regular cleaning of the product 
k. Opening the product and/or tampering with internal circuitry 
l. Products lost, stolen or discarded  
 
 
 
RuncoCare Claim Procedure 
Warranty Exclusions 
 
						

							            Runco CP-42HD/CP-52HD Owner’s Operating Manual  v   
 
 
 
m. Any  damage  or  dissatisfaction  associated  with  latent  images, “burn-in,” or  any  other  damage  determined  by 
Runco to be the result of customer use patterns 
n. Any other cause, which does not relate to a product defect in material or workmanship 
5. Removal, installation, and set-up service charges are excluded from this Standard Limited warranty 
6. Black  uniformity  issues  or  other LCD  issues  associated  with  usage  outside  the  Runco  recommended  guidelines  and 
specifications for the product 
7. Bright  or  dark  sub  pixels  that  are  characteristic  of  LCD  technology  and  considered  by  Runco  to  be  acceptable  and 
within Runco‟s manufacturing specifications.  (See Sub Pixel Policy below)   
8. Second day shipment delivery time and availability may vary based on origin and destination and Runco is unable to 
deliver to PO Box and FPO Box addresses 
 
 
It is not uncommon for one or more sub pixels to become bright or dark during or after the manufacturing process.  A 
bright sub pixel is one that remains in the on position, and a dark sub pixel is one that appears black or off.  The sub 
pixels are usually hard to see and will not detract from the display quality or usability at normal viewing distance.  The 
following are Runco‟s criteria for identifying bright or dark sub pixels that would be considered unacceptable:  a) the 
number of bright or dark sub pixels; b) the location of the bright or dark sub pixels; c) the color of the bright sub pixels; and 
d) the Runco model size.  If sub pixels have been identified as unacceptable by Runco the LCD will be deemed faulty and 
will be replaced if reported within the warranty period.  If there are issues with bright or dark sub pixels, gather the 
information listed above and call or email [email protected]. 
 
 
1. Runco will not accept returned Product unless an RMA number has been issued by Runco. 
2. If  an  Advance  Exchange  return  occurs,  it  is  the  customer‟s  responsibility  to  properly  package  the  defective  product 
and  ship  it  to  the  address provided  by  the  Runco  technical support  representative with  the  RMA  number  prominently 
displayed.  If the defective product is not properly packaged and is damaged in transit during its return to Runco, you 
may  be  invoiced  for  either  the  repair  costs,  if  repairable,  or  the  MSRP  of  a  replacement  product  and  shipping  costs 
incurred by Runco.  
3.  The  repaired  or  replaced  product  will  assume  the  remainder  of  your  original  product‟s  RuncoCare  Service  Plan  term 
or 90 days from the date the repaired unit is shipped, whichever is longer.   
4. If  a  replacement  product  is  sent,  the  customer  agrees  to  retain  the  replacement  for  the  product  you  purchased  and 
your defective product becomes the property of Runco.  
 
Runco offers extended and expanded service plans.  For information on additional product protection, please email 
[email protected] or call (toll free) 800-23-RUNCO (800-237-8626). 
 
Please visit http://www.runco.com/support/product-registration/ to register product. 
 
RUNCO PROVIDES NO WARRANTIES, EXPRESS OR IMPLIED, EXCEPT THOSE EXPRESSLY PROVIDED HEREIN.  
RUNCO  EXPRESSLY  DISCLAIMS  ALL  OTHER  WARRANTIES,  INCLUDING  THE  IMPLIED  WARRANTIES  OF 
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.   
 
 
 
Extended Service Options 
Sub Pixel Policy 
Other Terms and Conditions 
Online Product Registration 
Limitation of Implied Warranties 
 
						

							vi                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
 
 
RUNCO‟S  MAXIMUM  AGGREGATE  LIABILITY  HEREUNDER  IS  LIMITED  TO  THE  COST  OF  REPAIR  OR 
REPLACEMENT OF THE PRODUCT.     
1. RUNCO SHALL NOT BE LIABLE FOR DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECT IN THE 
PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF TIME, 
LOSS OF PROFITS, LOSS OF BUSINESS OPPORTUNITY, LOSS OF GOODWILL, INTERFERENCE WITH 
BUSINESS RELATIONSHIPS, OR OTHER COMMERCIAL LOSS, EVEN IF THE CUSTOMER HAS BEEN 
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.   
2. RUNCO SHALL NOT BE LIABLE FOR ANY CONSEQUENTIAL, INCIDENTAL, INDIRECT, SPECIAL, OR 
PUNITIVE DAMAGES ANY OTHER DAMAGES, WHETHER INCIDENTAL, INDIRECT, CONSEQUENTIAL OR 
OTHERWISE.   
3. RUNCO SHALL NOT BE LIABLE FOR ANY CLAIM AGAINST THE CUSTOMER BY ANY OTHER PARTY.   
 
This  warranty  gives  you  specific  legal  rights,  and  you  may  have  other  rights,  which  vary  from  locality  to  locality.    Some 
localities  do  not  allow  limitations  on  implied  warranties  and/or  do  not  allow  the  exclusion  of  incidental  or  consequential 
damages, so the above limitations and exclusions may not apply to you.   
 
 
© Copyright 2009 Runco International, LLC (“Runco”). This document contains proprietary information protected by 
copyright, trademark and other intellectual property laws. All rights are reserved. No part of this manual may be 
reproduced by any mechanical, electronic or other means, in any form, without prior written permission of Runco. 
 
The trademarks reproduced in this Runco Owner‟s Manual and used on the Runco Products are either owned by Runco 
or are licensed by Runco. You may not reproduce or use the trademarks without the prior written consent of Runco.  
 
Runco Products are manufactured under one or more of the following patents: US. Patent 6755540 and Other Patents 
Pending. 
 
 
 
 
 
 
 
Exclusion of Damages 
Effect of Local Law 
COPYRIGHT AND TRADEMARKS 
 
						

							            Runco CP-42HD/CP-52HD Owner’s Operating Manual  vii   
 
 
Important Safety Instructions 
Thank you for your purchase of this quality Runco video product! For the best performance, please read this manual 
carefully as it is your guide through the menus and operation.  
 
 
1. Read these instructions. 
2. Keep these instructions. 
3. Heed all warnings. 
4. Follow all instructions. 
5. Do not block any of the ventilation openings. Install in accordance with the manufacturer‟s instructions. 
6. Do not place your LCD monitor on an unstable stand, shelf or table. Serious bodily injury and/or damage to the LCD 
monitor may result if it should fall. Your sales person can recommend an approved wall mounting kit. A special wall 
mounting kit is available for this model.  To prevent injury, the LCD monitor must be securely attached to the wall in 
accordance with the installation instructions provided with the mounting kit. Always mount using recommended and 
substantial fixture and fittings. 
7. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) 
that produce heat.  Do not mount near an open flame source.  Open flames must never be used near this LCD 
monitor. 
8. This monitor surpasses IP56 weatherproof standards. It is not protected against temporary or continuous immersion 
in liquid.  Do not submerge this monitor in liquid. 
9. Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one 
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third 
prong is provided for your safety. When the provided plug does not fit into your outlet, consult an electrician for the 
replacement of the obsolete outlet. 
10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles and the point 
where they exit from the apparatus.  Do not allow anything to rest on the power cord and do not locate this LCD 
monitor where the cord will be damaged by people walking on it. 
11. Only use the attachments/accessories specified by the manufacturer. 
12. Use only with a cart, stand, tripod, bracket or table specified by the manufacturer or sold with 
the apparatus. When a cart is used, use caution when moving the cart/apparatus to avoid 
injury from tip-over. 
13. This LCD monitor should be operated only from the type of power source indicated on the 
monitor or as indicated in the Operating Instructions.  If you are not sure of the type of power supply, consult your 
sales person or your local power company. 
14. Unplug this apparatus during lightning storms or when unused for long periods of time. 
15. Do not use immediately after moving the LCD monitor from a low temperature to a high temperature environment, as 
this causes condensation, which may result in fire, electric shock, or other hazards.   
16. Before cleaning, be sure to unplug the power cord from the power outlet. 
17. Do not apply liquid cleaners or aerosol cleaners directly onto the LCD monitor. Use a damp cloth for cleaning. 
 
   
						

							viii                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
 
 
18. This LCD monitor should have a minimum 
distance of 5cm away from the wall and the 
monitor should have 10cm distance around the 
top and sides. 
19. Refer all servicing to qualified service 
personnel. Servicing is required when the 
apparatus has been damaged in an way, such 
as power supply cord or plug is damaged, 
objects have fallen into the apparatus, the 
apparatus does not operate normally, or has been dropped. 
20. Keep the packing material in case the equipment should ever need to be shipped. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
						

							            Runco CP-42HD/CP-52HD Owner’s Operating Manual  ix   
 
 
Compliance Information 
 
 
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 
residential installation. 
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is no guarantee that 
interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or 
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct 
the interference by one or more of the following measures: 
 Reorient or relocate the receiving antenna. 
 Increase the separation between the equipment and receiver. 
 Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 
 Consult the dealer or an experienced radio/TV technician for help. 
 
 
This Class B digital apparatus complies with Canadian ICES-003. 
Cet appareil numérique de la classe B est conforme á la norme NMB-003 du Canada. 
 
 
Lamp(s) inside this product contain mercury. This product may contain other electronic waste that can be 
hazardous if not disposed of properly. Recycle or dispose in accordance with local, state, or federal Laws. 
For more information, contact the Electronic Industries Alliance at WWW.EIAE.ORG. 
For lamp specific disposal information check WWW.LAMPRECYCLE.ORG. 
 
 
 
This symbol found on your product or on its packaging, indicates that this product should not be 
treated as household waste when you wish to dispose of it. Instead, it should be handed over to an 
applicable collection point for the recycling of electrical and electronic equipment. By ensuring this 
product is disposed of correctly, you will help prevent potential negative consequences to the 
environment and human health, which could otherwise be caused by inappropriate disposal of this 
product. The recycling of materials will help to conserve natural resources. This symbol is only valid in 
the European Union. If you wish to discard this product, please contact your local authorities or dealer 
and ask for the correct method of disposal. 
 
FCC PART 15: 
DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC EQUIPMENT (Applicable throughout 
the European Union and other European countries with separate collection programs) 
INDUSTRY CANADA (ICES-003) 
IMPORTANT RECYCLE INSTRUCTIONS 
   
						

							x                      Runco CP-42HD/CP-52HD Owner’s Operating Manual