Runco Cp 42hd Installation And Operation Manual

							            Runco CP-42HD/CP-52HD Owner’s Operating Manual  7   
 
 
Controls and Functions 
 
Figure 2-2 shows the Climate series Input and Output Interfaces. 
 
Figure 2-2. Climate Series LCD Input/Output Interfaces 
1. HDMI 1 (Digital) 
HDCP-compliant digital video inputs for connecting an HDMI or DVI source. 
2. HDMI 2 (Digital) 
HDCP-compliant digital video inputs for connecting an HDMI or DVI source. 
3. RS-232 
A female, 9-pin D-sub connector for interfacing with a PC or home theater 
automation/control system. 
4. PC LINE 
Connect the audio output from a personal computer here. 
5. RGB/VGA P.C. 
Provides a standard, 15-pin VGA-style connection to either an RGB or 
component high-definition source, or to a personal computer.  
6. COMPONENT 2 
Standard- or high-definition (up to 1080p), YPrPb component video and stereo 
audio input.  
7. COMPONENT 1 
Standard- or high-definition (up to 1080p), YPrPb component video and stereo 
audio input. Also provides RGB input for RGBS sources. 
Climate Series LCD Inputs 
and Outputs 
  
						

							8                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
Controls and Functions 
 
 
8. VIDEO INPUT (Composite or S-Video + Stereo Audio) 
Standard, composite or S-video input and stereo audio input for connecting a 
VCR, camcorder, laser disc player, Super VHS (S-VHS) VCR or other 
composite or S-video source. 
9. DIGITAL AUDIO OUTPUT 
Connects the TV audio out to the digital audio input of an amplifier. 
10. SPEAKER OUTPUT (LEFT + RIGHT) 
For connecting external speakers with an impedance of 4 ohms. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
						

							            Runco CP-42HD/CP-52HD Owner’s Operating Manual  9   
 
 
Controls and Functions 
 
 
Figure 2-3 shows the Climate Series LCD remote control, and the paragraphs 
that follow describe its functionality. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
Figure 2-3. Climate Series LCD Remote Control 
 
2.2  
Climate Series LCD 
Remote Control 
 
						

							10                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
Controls and Functions 
1. REMOTE SENSOR 
2. SOUND MODE 
Press this button to select sound mode, Standard, Music, Movie, or Personal. 
3. DISPLAY INFORMATION 
Press this button to view input signal information (source and resolution). 
4. MUTE ON/OFF 
Press this button to mute the audio output to the speakers. 
5. MTS 
Press this button to scroll through the available MTS settings. 
6. VOLUME UP 
Use this button to increase sound volume. 
7. DOT 
Press this button when entering the channel number for direct tuning to a 
digital TV channel. 
8. 0 - 9 
Use these keys to enter numeric characters. 
9. CHANNEL UP 
Use this button to adjust channel up. 
10. VOLUME DOWN 
Use this button to decrease sound volume. 
11. C.C. KEY 
Press this button to activate Closed Caption function. Supports CEA608B 
and CEA708B. 
12. CHANNEL RETURN 
Press this button to return to the previous channel selected. 
13. CHANNEL DOWN 
Use this button to adjust channel down. 
14. SOURCE INPUT 
Press this button to select the input you would like. Use the Up/Down Keys 
to highlight the input source and then press OK. / ENTER. 
15. LEFT KEY 
Use this button to select items or settings. 
16. MENU / EXIT 
Press this button to show or hide the OSD controls, to save menu item 
setting(s) or exit the current menu and return to the previous one. 
17. AUTO FUNCTION 
Press this button to auto-scan input sources. 
18. PICTURE MODE 
Press this button to select picture mode, Standard/Dynamic/Personal. 
19. UP KEY 
Use this button to select items or settings. 
20. RIGHT KEY 
Use this button to select items or settings. 
21. DOWN KEY 
Use this button to select items or settings. 
22. O.K. / ENTER 
Press to select a highlighted menu item or confirm a changed setting. 
23. HDMI 1 & 2 
Press to select an HDMI input. 
24. COMPONENT 1 & 2 
Press to select a Component input. 
 
						

							            Runco CP-42HD/CP-52HD Owner’s Operating Manual  11   
 
 
Controls and Functions 
25. COMPOSITE 
Press to select the Composite input as the source. 
26. T.V 
Press this button to switch to the antenna/DTV/CATV input. 
27. S-VIDEO BUTTON 
Press to select the S-Video input as the source. 
28. VGA BUTTON 
Press to select the VGA input as the source. 
29. DIGITAL BUTTON 
Press this button to switch to the Digital Video input. 
30. ASPECT BUTTON 
Use this button to select Normal, Wide, Zoom, or Cinema. 
31. NC 
Reserved button 
32. SLEEP BUTTON 
Press this button to set the sleep mode function. 
33. EPG 
Switches the Electronic Program Guide (EPG) on/off. 
34. NC 
Reserved button 
35. POWER ON 
Use this button to turn the display on. 
36. FAV 
Use this button to select stored favorite channel. To store favorite channel, 
select Favorite from the Channel menu (see page 30). 
37. POWER OFF 
Use this button to turn the display off. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
						

							12                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
3. Installation 
 
 
 
For the first time use of the remote control, please pull out the PET Film. 
 
 
 
 
 
 
 
 
To change the battery in the remote control: 
1. Remove the six screws on the back of the remote. 
2. Remove the battery and replace with another Lithium CR2032 Battery. 
3. Please follow the drawing to remove the screws and replace the battery. 
 
  
 Make sure that there is nothing obstructing the infrared beam between the 
remote control and the IR receiver on the projector. 
 If the effective rage of the remote control decreases, or it stops working, 
replace the battery with a new one. 
 Ambient conditions may possibly impede the operation of the remote control.  
If this happens, point the remote control at the monitor, and repeat the 
operation. 
 This remote control is waterproof and floats. 
 
3.1 
Remote Control 
Battery Installation 
Notes on Remote Control 
Operation 
Battery Installation 
PET Film Removal 
    
						

							            Runco CP-42HD/CP-52HD Owner’s Operating Manual  13   
 
 
Installation 
 
Table 3-1 gives a quick overview of the Climate Series LCD installation process. 
The sections following this one provide detailed instructions. 
 
Installation should be performed by a qualified custom video 
installation specialist. 
 
Table 3-1. Installation Overview 
Step Procedure For Details, Refer 
to page… 
1 Mount the Climate Series LCD on a wall 
(optional) 14 
2 Connect signal sources to the Climate Series 
LCD 14 
3 Connect external controller to RS-232 port 
(optional) 18 
4 Apply power to the Climate Series LCD 20 
5 Change the OSD language 20 
6 If using the Climate Series LCD with a PC, 
adjust PC display properties 21 
7 
Display calibration: adjust the following for 
each input; save settings when finished: 
 Contrast 
 Brightness 
 Color level 
 Tint 
 Sharpness 
24 
 
 
 
 
 
 
 
 
 
 
 
3.2 
Quick Setup 
  
						

							14                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
Installation 
 
Proper installation of your Climate Series LCD will ensure the highest possible 
picture quality. Whether you are installing the Climate Series LCD temporarily or 
permanently, you should take the following into account to ensure that it performs 
optimally. 
 
You can either place the Climate Series LCD on a table or in an entertainment 
center, or mount it on a wall. 
If you do decide to wall-mount the Climate Series LCD, ensure that the wall-
mount bracket is installed according to the instructions included with it. The wall 
must be capable of supporting a redundant weight factor three (3) times the 
weight of the display, or be reinforced. 
Runco recommends that this be done by a customer installation specialist.  
Use only the Runco-approved wall-mount kit designed for your 
display. 
Other considerations and tips that can help improve your installation: 
 Keep the Climate Series LCD away from devices that radiate 
electromagnetic energy such as motors and transformers. Common sources 
of these include slide projectors, speakers, power amplifiers and elevators. 
 
Proceed as follows to connect the Climate Series LCD to your video sources, 
external controller(s) – if present – and AC power. 
When connecting your equipment: 
 Turn off all equipment before making any connections. 
 Use the correct signal cables for each source. 
 Ensure that the cables are securely connected. Tighten the thumbscrews on 
connectors that have them. 
 Use the left audio input when connecting mono audio sources. 
 
To access the rear input/output connectors, loosen the two captive screws on the 
input/output cover and remove the input/output connector cover. 
 
3.3 
Installation 
Considerations 
Wall-Mounting the Climate 
Series LCD 
3.4 
Connections to the 
Climate Series LCD 
Input/Output Connection 
Panel Access 
    
						

							            Runco CP-42HD/CP-52HD Owner’s Operating Manual  15   
 
 
Installation 
Connect your video sources to the Climate Series LCD as shown and described 
in the sections that follow. 
HDMI Connections: The Climate Series LCD has two HDMI inputs for 
connecting a BD/HD-DVD/DVD player, DTV decoder, personal computer or any 
other device with an HDMI or DVI output. Connect such devices as shown in 
Figure 3-1. 
Use the HDMI inputs whenever possible. This ensures the 
highest video quality because the signal is carried in the digital 
domain throughout the entire signal path, from source component 
output into the display. 
 
This Climate Series LCD supports the VESA Display Data 
Channel (DDC) standard. This standard provides “Plug and Play” 
capability; the display and a VESA DDC-compatible computer 
communicate their setting requirements, allowing for quick and 
easy set-up. 
In order for Plug and Play to work correctly, you must turn on the display before 
you turn on the connected computer. 
 
 
 
 
 
 
 
 
 
 
 
Figure 3-1. HDMI Connections 
 
 
 
 
 
Connecting the Climate 
Series LCD to Source 
Components 
    
						

							16                      Runco CP-42HD/CP-52HD Owner’s Operating Manual 
 
 
Installation 
 
RGB Connections: The Climate Series LCD has an RGB input and a stereo 
audio input for connecting a personal computer; see Figure 3-2. 
 
 
Figure 3-2. Analog RGB Connections 
 
1. Refer to Supported Timings on page xx for a list of computer signals compatible 
with the Climate Series LCD. Use with signals other than those listed may cause 
some functions not to work. 
2. Some Macintosh computers may require a Macintosh video adapter. Contact 
your nearest authorized service center or dealer. 
3. This Climate Series LCD may not be able to display images from notebook 
computers in simultaneous (CRT/LCD) mode. Should this occur, switch the 
notebook computer to “CRT only” mode. If you are unsure how to do this, refer to 
your notebook computer’s user manual.