Runco Cl 610lt Projector User Manual

							
51Runco CL-610 Owner’s Operating Manual

CodeFunction
x131x Switch to Composite input
x132x Switch to S-Video input
x133x Switch to RGB-HD input
x134x Switch to DVI input (HDMI)
x135x Switch to Component 1 input
x136x Switch to Component 2 input
x156x Background Color = Blue
x157x Background Color = White
x181x Toggle Blue Image on/offRS-232C Control Codes 
(continued)
RS-232 Setup 
						

							
52Runco CL-610 Owner’s Operating Manual

RS-232 SetupThis page is intentionally left blank. 
						

							
53Runco CL-610 Owner’s Operating Manual

Projector Type:Digital Light Processing™ (DLP™), Single-Chip SuperOnyx™ 
DMD™
Native Resolution:1280 x 720 (16:9)
Aspect Ratios:4:3, Letterbox, 16:9 Anamorphic, VirtualWide™, Cinema,  
 Virtual
 Cinema™
Video Standards: NTSC, PAL, SECAM
DTV Compatibility:480p, 576p, 720p, 1080i
Scan Frequency:
Horizontal: 15-80 kHz;  
Vertical: 50-100 Hz
Picture Size
 
(16:9 screens)
: Recommended Width: 72 in. (1.83 m) to 
96 in. (2.44 m)
Capable of screen widths between 48 in. (1
.22 m) and 240 in. 
(6.10 m)
Throw Distance 
 
(Factor x Screen 
Width): CL-610
1.37 to 1.82 x Screen Width
CL-610LT
1.86 to 2.47 x Screen Width
Horizontal and  
Vertical Offset: -  Lens is fixed
- 
Horizontal and/or vertical image shift via OSD controls
- Bottom edge of projected image is aligned with lens center 
when projector is upright
- Top edge of projected image is aligned with lens center 
when projector is inverted (ceiling-mounted)
Lamp:210W NSH
Lamp Life:2000 hours
Inputs:
(1) Composite Video, (1) S-Video, (1) RGB/Component (via 
BNC), (1) RCA Component Video, (1) HDMI, (1) RS-232
12V Output:Max. 0.25 Amps, active when the projector is on
Specifications 
						

							
54Runco CL-610 Owner’s Operating Manual

Specifications
Brightness and 
Contrast:Cinema Standards Measurement System (CSMS) Specifications
-  Brightness: 12.3 to 19.3 foot-Lamberts (fL)
-  Contrast Ratio: 185:1 to 205:1
These measurements are taken from the projector in a controlled, 
home theater environment. All measurements are made to ANSI/
NAPM IT7.228-1997 specifications using the Photo Research 
PR-650 SpectraColorimeter and Minolta LS-100 Luminance Meter, 
Video Essentials test DVD and a 1.3 gain, 72-inch wide screen. The 
projector is calibrated to a color temperature of 6,500K and has a 
minimum of 150 hours of usage.
The foot-Lambert (fL) is the unit of measurement used in commercial 
movie theaters to express image brightness at the screen surface. 
The Society of Motion Picture and Television Engineers (SMPTE) 
specifies 16 fL as the target image brightness for film-based 
projectors using an open gate (without film in the projector). More 
importantly, today SMPTE specifies 12 fL as the target image 
brightness in Digital Cinema theaters. The foot-Lambert measurement 
is dependent on screen size, screen gain and projector light output.
Home Theater Calibration Specifications
-  Light Output: 395 to 526 ANSI Lumens
-  Contrast Ratio: 
185:1 to 205:1
These specifications are obtained by calibrating the projector as 
described above for CSMS measurements. 
Industry-Standard Specifications
-  Light Output: 1150 ANSI Lumens
-  Contrast Ratio: 1400:1 to 2200:1
These are typical projector brightness and contrast specifications 
found in most companies’ sales literature. Runco includes these 
measurements in its literature to allow for direct comparison with 
other manufacturers’ projectors. These measurements are typically 
taken at 9,000K to 13,000K to get expected performance data 
when the projector is used in professional, commercial and industrial 
displays.
Power Requirements:100 to 240V AC, 50/60Hz, 310W
Operating 
Environment:41ºF to 95ºF (5º to 35ºC); 20-80% humidity (non-condensing)
Dimensions: Width: 16.5 in. (419.1 mm) 
Depth: 16.31 in. (414.27 mm) 
Height (without feet): 5.56 in. (141.22 mm)
Height (with feet): 6.12 in. (155.45 mm)
Weight
 
(including lens):
Net: 32 lbs. (14.6 kg); 
Shipping: 43.5 lbs. (19.8 kg)
Regulatory Approvals: Complies with FCC Class B, CE, C-Tick
Limited Warranty:
Projector: Two (2) years parts and labor from the date of 
delivery to the end user.
 
Lamp Warranty:
 1000 hours or six (6) months, whichever 
comes first.
Specifications are subject to change without notice. 
						

							
55Runco CL-610 Owner’s Operating Manual

Dimensions
16.31 in. (414.27 mm)5.56 in. (141.22 mm)6.12 in. (155.45 mm)
2.66 in. (67.53 mm)
11
.0 in. (279.4 mm)
16.5 in. (419.10 mm)
14.80 in. (376.0 mm)
8.86 in. (225.0 mm)
8.07 in.
(205 mm) 12.57 in.
(319.15 mm)
0.91 in. (23 mm)2.36 in.(60 mm) 
						

							
Runco CL-610 Owner’s Operating Manual
Runco International • 2900 Faber Street • Union City, CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300www.runco.com
RUMA-011115
rev 09-12-05
S E R I A L  N U M B ER