Runco Cl 610 Projector User Manual

21Runco CL-610 Owner’s Operating Manual

Installation
➤ Vertical and Horizontal 
PositionProper placement of the projector relative to the screen will yield a rectangular, perfectly-
centered image that completely fills the screen. 
Ideally, the projector should be positioned perpendicular to the screen and in such a 
way that the lens center is aligned with either the top or bottom edge of the screen 
area, and centered horizontally.  
The top of the projected image is even with the lens center when...

22Runco CL-610 Owner’s Operating Manual

Installation
Mounting ➤There are several methods for mounting the projector. Depending on your chosen 
installation, one method may be more suitable than another. In typical front and rear 
screen installations the projector can be mounted to a secure and level surface, such 
as a table or cart. Carts are useful when moving a projector during a presentation or 
from site to site. If possible, lock the wheels when it’s in position to prevent it from 
being moved...

23Runco CL-610 Owner’s Operating Manual

Connecting Video InputsWhen connecting your equipment, make sure to:
1.  Turn off all equipment before making any connections.
2.  Use the correct signal cables for each source.
3.  Ensure the cables are firmly connected.
Connections
DVD Player
➤ Video / S-Video / 
Component
 
(Interlaced Video) 

24Runco CL-610 Owner’s Operating Manual

Connections
Progressive Component ➤
    (DTV Y/P
B/PR)
The RGB BNC input (labeled  COMP 2 / RGB) supports two kinds of HDTV formats: 
Progressive component (DTV Y/PB/PR) and DTV RGB. The projector will automatically 
detect the resolution.
RGBHV (DTV RGB) ➤
DTV Source
DTV Source
Vert Horiz Red Blue Green
Red Blue Green 

25Runco CL-610 Owner’s Operating Manual

Connections
Connecting a Computer 
(GBRHV)
Vert Horiz Red Blue Green
Connecting an HDMI™ 
Device
This unit is compatible with the 
following computer resolutions:
 
1024x768, 800x600 and 640x480.
Use an HDMI (High-Definition Multimedia 
Interface) cable to connect the projector 
to an HDMI device.
PC or Notebook 
(PC, RGB, Analog,
 
HD Component,
 
Progressive DVD)
H D M I   S o u r c e 
(DVD player or HD 
tuner with HDMI 
or DVI out) 

26Runco CL-610 Owner’s Operating Manual

Power
switch 

The CL-610 ships with various types of AC power cords. Choose the one that is 
appropriate to your locale. 
Plug the female end of the power cord into the AC receptacle on the rear of the projector 
(AC 100V ~ 240V). Then, connect the other end to your AC power source. 
Connecting to AC Power
Connections 

27Runco CL-610 Owner’s Operating Manual

Turning on the Power
Basic Operation
LIGHTOFFON
VIDS-VID COMP1
RGBHD HDMI
COMP2
Focus
Zoom out
Zoom in
•  Adjust the projected image size with  
  the  zoom ring on the lens. To focus the 
 
  image, rotate the focus ring on the 
 
  lens.
Adjusting the Zoom and 
Focus
•  Tur n on the main power switch. The 
POWER LED will light orange.
 
•  Press the ON button on the remote 
 
  control to turn on the projector. The  
  POWER LED flashes orange during  
  the...

28Runco CL-610 Owner’s Operating Manual

Basic Operation
Selecting an Aspect Ratio
Adjusting the Picture
ANA16X9VWIDELBOX4X3
CINEMAVCINE21
Select an aspect ratio that suits the format of 
the video signal. The following aspect ratios 
are available.
• 
CINEMA:  The image in the Letterbox mode 
is enlarged to a 16x9 image and the upper 
and lower portions are compressed.
• ANA16X9 (Anamorphic):  A 4:3 image is 
stretched horizontally to fit a 16:9 screen. 
This setting is for 16:9 DVDs and HDTV...

29Runco CL-610 Owner’s Operating Manual

Setting the MenuINFORVR
ENTER
EXITMENU
•  Press INFO to view information about the 
active signal source and aspect ratio.
•   Press  MENU to open or close the on-screen 
menu.
•  Use the arrow buttons ( ▲,◄,▼,►) to select 
menu items or make adjustments.
•  Press ENTER or ► to enter the setting of 
items in the menu, or press  EXIT to leave 
and save the setting of items in the menu. For more information 
on settings, See “On-
Screen Display Menus” 
on page 31....

30Runco CL-610 Owner’s Operating Manual

Turning off the Power
LIGHTOFFON
VIDS-VID COMP1
RGBHD HDMI
COMP2
Basic Operation
•  Press  the OFF  button  to  tur n  off  the 
projector.
•  The  POWER  LED will blink green and the 
fans will speed up for a quick cool-down. 
The  projector  will  not  respond  to  any 
command for 90 seconds.
•  The POWER  LED will light solid orange 
o n c e   t h e   c o o l i n g   d o w n   c y c l e   h a s 
completed.
•  The  fans  will  run  for  three  minutes  to...