Runco Cl 410 Projector User Manual

11

Source Buttons
Press this button to 
select Composite 
video source.Press this button to 
select Component 
1 source.Press this button 
to select RGB HD 
source.
Press this button to 
select LS-Video 1 
source. Press this button to 
select Component 
2 source.Press this button to 
select DVI source.
Aspect Ratio Buttons
Press this button to 
select Anamorphic 
aspect ratio.Press this button to 
select 4 x 3 aspect 
ratio.Press this button 
to select Letterbox 
HD aspect ratio.
Press this button to...

12

Using the Remote Control
IntroductionAvailable Range of the Remote Control
The remote control can be used to control the projector within the ranges shown in 
the illustration.
When using the remote control: 
•  For  best  results,  hold  the  remote control 
within 23 ft. (7m) of the back or top sensor 
and aligned within 30˚.
•  Be sure not to drop the remote control or 
expose it to moisture or high temperature.
•  The remote control may malfunction under 
a fluorescent lamp. If that occurs, move...

13

Before Setting Up
Connections and Setup
This projector can be connected to:
Video Equipment:
■ V C R , L a s e r d is c  p la y e r o r o th e r v id e o  e q u ip m e n t w ith  a  C o m p o s ite  v id e o   
   output.
■ DVD player or DTV decoder or other device with an S-video output.
 
A Computer:
Connect to the computer with one of the following types of cable, depending 
on the specifications of your computer:
■ HD 15-pin VGA to HD 15-pin VGA cable
■ DVI-D to DVI-D cable
■ RS-232C cable...

14

Connection and Setup
Connecting to Video 
EquipmentConnecting with S-Video or Composite Video Cable
You can connect devices equipped with Composite video or S-Video output, such as a 
VCR or laser disc player, to the Video or S-Video input using the appropriate cable.
1  Connect an S-Video or Composite video cable to the projector.
2   Connect the cable to the S-Video or Composite video output on the video
    equipment.
�� ���� ���������
������ �����
��
��
���� �����
Connecting with Component...

15

Connection and Setup
Connecting to DVI Video Equipment
You can connect to devices equipped with DVI output, such as a DVD player or DTV 
decoder to the DVI input. 
1   Connect a DVI-D cable to the DVI input on the projector. Secure the connectors    
    by tightening the thumbscrews.
2   Connect the DVI-D cable to the DVI output on the video equipment. Secure the 
connectors by tightening the thumbscrews.
�������� �����������������
�������� ���
Connecting to HDMI Equipment with DVI-D to HDMI Cable...

16

Connecting the Projector 
to a ComputerConnecting with HD15-pin VGA cable.
1   Connect an HD 15-pin VGA cable to the RGB HD input on the projector. Secure 
the connectors by tightening the thumbscrews.
2    Connect the VGA cable to the VGA output on the computer. Secure the connectors    
 by tightening the thumbscrews.
Connection and Setup
�����������������
����������
��
���� ���
Note:
•  See the “Computer Compatibility Chart” on page 49 for a list of computer signals 
compatible with the...

17

Connection and Setup
Connecting the projector to a computer with DVI-D cable
1    Connect a DVI-D cable to the DVI / Computer input on the projector. Secure     
 the connectors by tightening the thumbscrews.
2    Connect the cable to the DVI-D output on the video equipment. Secure the connectors  
 by tightening the thumbscrews.
����������������
�����������
Plug and Play■   This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector 
and a VESA DDC compatible computer communicate...

18

Using the Adjustment 
FeetThe  height  of  the  projector  can  be  adjusted  using  the  adjustment  feet.  This  is  useful  for 
correcting the angle of the projection when the projector is placed on an uneven surface 
or when the screen is slanted. The adjustment feet are connected to threaded bolts, which 
can be turned in to shorten or out to lengthen.
1   Lift the side of the projector you would like ti raise or lower.
2   Turn the adjustment feet to shorten or lengthen. If the screen is at...

19

1  Zoom is adjusted by  
    rotating the zoom ring.
2   Focus is adjusted by  
    moving the focus ring 
 
    right or left until focus  
    is achieved.
Adjusting the Lens
Connection and Setup
The image is focused by rotating the focus ring on the projector. The image can be 
adjusted to the desired size by rotating the zoom ring.
������� ���
���
������
Zoom ring
ZoominZoomout
Focus ring 

20

The height and width of the projected image can be adjusted to be within the shift 
range of the lens by rotating the lens shift dial at the top of the projectorUsing the Lens Shift
Connection and Setup
���������������
�� �� ���������������������
�������������
Setting Up The ScreenPosition the projector perpendicular to the screen with all feet flat and level to achieve 
an optimal image.
Standard Setup (Front Projection)
Place the projector at the required distance from the screen according to the...