Ruger P97 Double Action Only Instructions Manual
Have a look at the manual Ruger P97 Double Action Only Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 48 Ruger manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
RUGER ®P97DAO PARTS LIST Design, prices and specifications subject to change without notice. SPECIFY MODEL WHEN ORDERING (See Exploded View on Page 24.) Part Name Part No. Model * Barrel KV00626 P97DAO * Blocker Lever KV02114 P97DAO Camblock KV07005-100 P97DAO Case Combo, .45ACP, Not Illustrated PGCC-45ACP P97DAO Case Only, Not Illustrated PGC-CF P97DAO Ejector V00911 P97DAO Ejector Pivot Assembly KV26600 P97DAO Ejector Spring V00902 P97DAO * Extractor KV01407 P97DAO * Firing Pin KV01127 P97DAO * Firing Pin Block KQ05000 P97DAO * Firing Pin Block Spring KQ05600 P97DAO * Firing Pin Spring KV01850 P97DAO Firing Pin Stop KV01554 P97DAO Frame V00285 P97DAO Front Sight, Must Be Drilled For Cross Pin V03203 P97DAO Front Sight Cross Pin, 2 Req’d. V04700 P97DAO * Hammer KV04021 P97DAO * Hammer Assembly KV04021-100 P97DAO Hammer Pivot Pin V02302 P97DAO Hammer Spring V00400 P97DAO 22
23 Part Name Part No. Model Hammer Spring Seat V02403 P97DAO Hammer Spring Seat Detent KV05301 P97DAO Hammer Spring Seat Pin V02551 P97DAO Hammer Strut V01610 P97DAO Hammer Strut Pin, Not Illustrated KV05150 P97DAO Lock & Keys, Brass W11001 P97DAO Magazine, Complete, 8-Shot Capacity P-16/8 P97DAO Magazine, Complete, 7-Shot Capacity P-16 P97DAO Magazine Floor Plate, Not Illustrated Q01020 P97DAO Magazine Follower, Not Illustrated KV02913 P97DAO Magazine Latch KV02605 P97DAO Magazine Latch Spring V02701 P97DAO Magazine Loader, Not Illustrated QML P97DAO Magazine Shell KV00508 P97DAO Magazine Spring, Not Illustrated V03006 P97DAO Magazine Spring Seat, Not Illustrated KQ03100 P97DAO * Plunger KH05100 P97DAO Rear Sight V03307 P97DAO Rear Sight Lock Screw V08001 P97DAO Recoil Spring, Inner V02819 P97DAO * Sear KV02213 P97DAO Sear Pivot Pin, 2 Req’d. KV04450 P97DAO Sear Spring KV06421 P97DAO * Slide KV00124 P97DAO Slide Stop Assembly KV03715-100 P97DAO Trigger KV03912 P97DAO * Trigger Bar KV01715 P97DAO Trigger Bar Spring V05402 P97DAO * PARTS SO MARKED MUST BE FACTORY FITTED
THE BASIC RULES OF SAFE FIREARMS HANDLING We believe that Americans have a right to purchase and use firearms for lawful purposes. The private ownership of firearms in America is traditional, but that ownership imposes the responsibility on the gun owner to use his firearms in a way which will ensure his own safety and that of others. When firearms are used in a safe and responsible manner, they are a great source of pleasure and satisfac- tion, and represent a fundamental part of our personal liberty. Firearms do not cause accidents! Firearms accidents are almost always found to have been the result of carelessness, or ignorance on the part of the shooter of the basic rules of safe gun handling. The following rules must be observed by gun users at all times. Safe gun han- dling is not just desirable, it is absolutely essential to your safety, the safety of others, and the continuation of gun ownership and sport shooting as we know it today. 1. LEARN THE MECHANICAL AND HANDLING CHARACTERISTICS OF THE FIREARM YOU ARE USING. Not all firearms are the same. The method of carrying and handling firearms varies in accordance with the mechanical provisions for avoiding accidental discharge and the various proper procedures for loading and unloading. No person should handle any firearm without first having thoroughly familiarized himself with the particular type of firearms he is using, and with safe gun handling in general. 2. ALWAYS KEEP THE MUZZLE POINTED IN A SAFE DIRECTION. Be sure of the bullet stop behind your target, even when dry-firing. Never let the muzzle of a firearm point at any part of your body or at another person. This is particularly important when loading or unloading a firearm. In the event of an accidental discharge, no injury can occur as long as the muzzle is pointing in safe direction. A safe direction means a direction which will not permit a discharged bullet to strike a person, or to strike an object from which the bullet may ricochet. 25 RUGER® INSTRUCTION MANUAL READ THE INSTRUCTIONS AND WARNINGS IN THIS MANUAL CAREFULLY BEFORE USING THIS FIREARM.
A safe direction must take into account the fact that a bullet may penetrate a wall, ceiling, floor, window, etc., and strike a person or damage property. Make it a habit to know exactly where the muzzle of your gun is pointing whenever you handle it, and be sure that you are always in control of the direction in which the muzzle is pointing, even if you fall or stumble. Keep your finger off the trigger until you are ready to shoot. 3. FIREARMS SHOULD BE UNLOADED WHEN NOT IN USE. Firearms should be loaded only when you are in the field or on the target range or shooting area, ready to shoot. Firearms and ammunition should be securely locked in racks or cabinets when not in use. Ammunition should be safely stored separate from firearms. Store your firearms out of sight of visitors and children. It is the gun owner’s responsi- bility to be certain that children and persons unfamiliar with firearms cannot gain access to firearms, ammunition, or components. 4. BE SURE THE BARREL IS CLEAR OF OBSTRUCTIONS BEFORE SHOOTING. Even a bit of mud, snow or excess lubricating oil or grease in the bore may cause the barrel to bulge, or even burst on firing, and can cause serious injury to the shooter and bystanders. Be sure that you are using ammunition of the proper caliber and loading for the gun you are using. If the report or recoil on firing seems weak, or doesn’t seem quite right, CEASE FIRING IMMEDIATELY, unload your firearm, and check to be sure that no obstruction has become lodged in the barrel. Never try to shoot an obstruction out! 26 2 13
5. BE SURE OF YOUR TARGET BEFORE YOU SHOOT. Don’t shoot unless you know exactly where your bullet is going to strike. Be sure of the bullet stop behind your target, even when dry-firing with an unloaded gun. If you are in the field hunting, do not fire at a movement or noise. Take the time to be absolutely certain of your target before you pull the trigger. 6. WEAR SHOOTING GLASSES AND HEARING PROTECTORS WHEN YOU SHOOT. All shooters should wear protective shooting glasses and adequate hearing protection when shooting. Exposure to shooting noise can damage hear- ing, and adequate eye protection when shooting is essential. 7. NEVER CLIMB A TREE OR FENCE WITH A LOADED FIREARM. Put the firearm down carefully before climbing a fence, and unload it before climbing or descending a tree or jumping over a ditch or other obstruction. Never pull or push a loaded firearm toward yourself or another person. When in doubt, or whenever you are about to do any- thing awkward, unload your gun! 27
8. DON, T SHOOT AT A HARD SURFACE, OR AT WATER. Bullets can glance off many surfaces like rocks or the surface of water and travel in unpredictable directions with considerable velocity. 9. NEVER TRANSPORT A LOADED FIREARM. Firearms should always be unloaded before being moved or placed in a vehicle. A suitable carrying case or scabbard should be used to carry an unloaded firearm to and from the shooting area. 10. AVOID ALCOHOLIC BEVERAGES WHEN SHOOTING. Don’t drink until the day’s shooting is over. Handling firearms while under the influence of alcohol in any form, or medications that could affect your judgment or co-ordination, con- stitutes a criminal disregard for the safety of others. 28
29 A BRIEF ACCOUNT OF AN EXTRAORDINARY ACHIEVEMENT: RUGER FIREARMS One of the few American firearms manufacturers who’s management has remained unchanged since starting in business, Sturm, Ruger & Company, Inc. had its beginning in a small machine shop occupying a rented frame building in Southport, Connecticut. In January 1949, with an initial investment of only $50,000 and an idea, William B. Ruger and Alexander M. Sturm started production of a .22 caliber autoloading pis- tol -- a design which was so successful that it became the cornerstone upon which one of the most comprehensive lines of sporting firearms ever made in America was established. After Alex Sturm’s death in 1951, William B. Ruger continued to direct the company alone and today, as Chairman of the Board, he is actively involved in the creative engineer- ing of new products and continues to provide the leadership which has made this 50-year-old company a sound and successful enterprise. Sturm, Ruger & Company, in this relatively short time, has established itself as a leading small arms design organization, developing a unique and broad line of fine quality sporting, military and police firearms to become one of the world’s most famous producers of revolvers, pistols, rifles and shotguns. From 1949 thru 1999 Ruger craftsmen have built many millions of firearms. During its five decades of growth and progress under the leadership of William B. Ruger, the company has developed a business philosophy and implemented policies which represent a constructive influence in the life of modern America. From the beginning, Sturm, Ruger & Company played a positive role in conservation efforts and has supported the inter- ests of shooters through such groups as the National Rifle Association, National Shooting Sports Foundation, and many regional sportsmen’s organizations. The company has always endeavored to market its firearms for constructive and recreational purposes, to emphasize the traditional aspects of shooting, to render meaningful public services and to encourage shooters in constructive and responsible participation in the shooting sports. Today, Sturm, Ruger & Company is particularly mindful of those ele- ments which have contributed to the creation of its success, and extends heartfelt thanks to its many loyal employees and customers. A current catalog of Ruger firearms is available free upon request to Sturm, Ruger & Co., Inc., Southport, CT 06490.
WHY NO WARRANTY CARD HAS BEEN PACKED WITH THIS NEW RUGER FIREARM The Magnuson-Moss Act (Public Law 93-637) does not require any seller or manufacturer of a consumer product to give a written war- ranty. It does provide that if a written warranty is given, it must be designated as “limited” or as “full” and sets minimum standards for a “full” warranty. Sturm, Ruger & Company, Inc. has elected not to pro- vide any written warranty, either “limited” or “full”, rather than to attempt to comply with the provisions of the Magnuson-Moss Act and the regulations issued thereunder. There are certain implied war- ranties under state law with respect to sales of consumer goods. As the extent and interpretation of these implied warranties varies from state to state, you should refer to your state statutes. Sturm, Ruger & Company wishes to assure its customers of its continued interest in providing service to owners of Ruger firearms. STURM, RUGER & Company, Inc. Southport, Connecticut 06490 U.S.A. http://www.ruger-firearms.com A COPY OF THE INSTRUCTION MANUAL FOR ANY RUGER FIREARM IS AVAILABLE FROM THE FACTORY FREE ON REQUEST. THESE INSTRUCTION MANUALS CONTAIN IMPORTANT WARNINGS WHICH MUST BE UNDERSTOOD BEFORE USING THESE FIREARMS. “RUGER”, the Sturm, Ruger logo, “SINGLE-SIX”, “BLACKHAWK”, “REDHAWK”, “SECURITY-SIX”, “SPEED-SIX”, “SERVICE-SIX”, “BEARCAT”, “OLD ARMY”, “10/22”, “MINI-14”, “MINI THIRTY”, “RANCH RIFLE”, “M77”, “77/22”, “GP-100”, “SP101”, “P-85” and “VAQUERO” are registered U.S. trademarks.