Ruger Carbines PS9 Instruction Manual
Here you can view all the pages of manual Ruger Carbines PS9 Instruction Manual. The Ruger manuals for Firearms are available online for free. You can easily download all the documents as PDF.
Page 21
21 ATTACHING RUGER SCOPE RINGS Each Ruger telescope ring is a mated assembly of a top and a base. Do not mix the parts of the two ring assemblies as they are not interchangeable. On the underside of each mounting ring assembly there is an integral lug, located off center with respect to the front and back sides of the mount. The lug is nearer to the front surface. By reference to the lug, the mounting ring can be correctly assembled with the front of the ring toward the muzzle of the rifle. 1....
Page 22
Serrated Sight Base G06302 Windage Adjustment - Screw G06250 Lock Screw G06410 (Must be loosened 1/2 turn prior to any sight adjustment) Aperture G06202 Base Screw (2 Reqd) G06401Rear Sight Nut G06451 WINDAGE ADJUSTMENT 1. Loosen Lock Screw approximately 1/2 turn. 2. Windage Screw can now turn: a. Turn screw clockwise to move bullet point of impact to the right . b. Turn screw counter clockwiseto move bullet point of impact to the left . ELEV ATION ADJUSTMENT 1. Loosen Lock Screw onlyenough to permit...
Page 23
23 SERVICE AND PARTS POLICY If you have any question with regard to the performance of your RUGER® CARBINErifle please write or call (520-778-6555) our Product Service Department in Prescott, Arizona 86301, fully describing all circumstances and conditions involved. If you should return your rifle to the factory for repair, or order parts for it, please comply with the following suggestions for prompt serv- ice: WARNING: BEFORE SHIPPING ANY FIREARM, BE ABSOLUTELY CERTAIN THAT IT AND ITS MAG- AZINE ARE...
Page 24
It is the purchaser’s responsibility to be absolutely certain that any parts ordered from the factory are correctly fitted and installed. Firearms are compli- cated mechanisms and IMPROPER FITTING OF PARTS MAY RESULT IN A DANGEROUS MAL- FUNCTION, DAMAGE TO THE FIREARM, AND SERIOUS INJURY TO THE SHOOTER AND OTHER PERSONS. The purchaser and installer of parts must accept full responsibility for the correct adjustment and functioning of the pistol after such installation. PARTS MUST FIT CORRECTLY 24...
Page 25
25 RUGER ® CARBINE PARTS LIST Design, prices and specifications subject to change without notice. SPECIFY MODEL AND CALIBER WHEN ORDERING (See Exploded View on Pages 30). Part Name Part No. Model *Barrel G00325 PC9, PC9GR *Barrel G00300 PC4, PC4GR Barrel Band G06501 PC9, PC4 Barrel Band G06510 PC9GR, PC4GR Barrel Band Assembly G06510-100 PC9GR, PC4GR Barrel Band Screw C-69H All Models *Bolt Lock G07301 All Models Bolt Lock Cross Pin, 2 Req’d G07900 All Models Bolt Lock Spring G09000 All Models Butt Plate...
Page 26
Part Name Part No. Model Extractor G01401 PC4, PC4GR Extractor Spring G01500 All Models Extractor Pin G01601 All Models Firing Pin KG01100 All Models Firing Pin Retaining Pin G06000 All Models Firing Pin Spring KV01850 All Models *Front Sight G05603 All Models Front Sight Cross Pin MA07201 All Models Ghost Ring Sight Adjustment Nut G06451 PC9GR, PC4GR Ghost Ring Sight Aperture G06202 PC9GR, PC4GR Ghost Ring Sight Assembly G06202-100 PC9GR, PC4GR Ghost Ring Sight Base G06302 PC9GR, PC4GR Ghost Ring Sight...
Page 27
27 Part Name Part No. Model Magazine, Complete P-18/10 PC9, PC9GR Magazine, Complete P-17/10 PC4, PC4GR Magazine Latch G03125 PC9 PC9GR Magazine Latch G03101 PC4, PC4GR Magazine Latch Retaining Pin G01200 All Models Magazine Latch Spring G05000 PC9, PC9GR Magazine Latch Spring G05050 PC4, PC4GR Pivot Pin Retainer G05501 All Models Rear Sight, Adjustable, Complete A15901-202 PC9 Rear Sight, Adjustable, Complete A15901-203 PC4 Rear Sight Body, Complete A15901-102 PC9 Rear Sight Body, Complete A15901-103...
Page 28
Part Name Part No. Model Recoil Block G00703 PC9, PC4 Recoil Block G00704 PC9GR, PC4GR Recoil Pad J05602 All Models Reversing Lever G07403 All Models *Safety G03803 All Models *Safety Plunger KG04800 All Models *Safety Plunger Spring G04900 All Models *Sear G02305 All Models Sear Interrupter G01300 All Models Sear Interrupter Plunger G05200 All Models Sear Interrupter Plunger Spring G05301 All Models Sear Spring G02401 All Models Sear Spring Plunger G05900 All Models *Slide G13725 PC9, PC9GR *Slide...
Page 29
Part Name Part No. Model Stock Bolt Bushing G08100 All Models Stock Bolt Lock Washer G06100 All Models Take Down Screw G09200 All Models Take Down Screw Flat Washer G09401 All Models Take Down Screw Lock Washer G09300 All Models Trigger KG02005 All Models Trigger Pivot Pin G02100 All Models Trigger Spring G02201 All Models Trigger Spring Support G03000 All Models *PARTS SO MARKED MUST BE FACTORY FITTED 29
Page 30
30 RUGER®CARBINE EXPLODED VIEW *The receiver spacer (Part No. G09900) is for PC9 rifles with serial numbers below 470-01666 and for PC4 rifles with serial numbers 480-02000 to 480-03110.