Ricoh Wg4 User Manual

189
6Settings
You can measure the ambient air pressure and height of the current camera 
location by using the cameras pressure sensor.
The camera shows the measurements in the sub display when the power is off 
(p.30). When the power is on, it appears in the main display (p.21). 
You can choose the type of information that appears on the sub-display. The sub-
display can be set to show the current time, the current time and air pressure, or 
the current time and height.
1Use the four-way controller (...

190
6Settings
You need to select the location in which you use the camera when you select 
[Pressure] or [Rel Height] for [Display Options], so that the camera calculates the 
height or water depth more accurately.
1Use the four-way controller (23) to select [Pressure Sensor] 
in the [ W Setting] menu.
2Press the four-way controller ( 5).The [Pressure Sensor] screen appears.
3Use the four-way controller (23) to select [Camera Location].
4Press the four-way controller ( 5).
5Use the four-way controller...

191
7Connecting to a Computer
Connec
t
i
n
g
 
t
o
 
a
 
C
o
m
p
u
t
e
rConnecting to a Computer
Set the device to which the camera is connected with the USB cable.
1Turn your camera on.
2Use the four-way controller ( 23) to select [USB Connection] 
in the [ W Setting] menu.
3Press the four-way controller ( 5).A pull-down menu appears.
4Use the four-way controller (23) to select [MSC].
5Press the 4 button.The setting is saved.
MSC (Mass Storage Class)
A general-purpose driver  program that handles dev...

192
7Connecting to a Computer
Connect the camera to a computer using the provided USB cable.
1Turn the computer on.
2Turn the camera off.
3Connect the camera to the computer using the USB cable.
Connect the terminal of the USB cable with the arrow mark   facing the 
battery.
The power lamp blinks when the camera is connected to the computer correctly.
4Turn your camera on.The power lamp stops blinking and remains lit when the camera is recognized 
by the computer. 
Connecting the Camera and a Computer
If...

193
7Connecting to a Computer
When the camera is being used by an application such as MediaImpression, it 
cannot be disconnected until the application is closed.
1Click the   (Safely Remove Hardware) icon in the task bar 
located at the bottom-right corner of the desktop.
2Click [Eject (the device 
connected)].
The message appears. 
3Disconnect the USB cable from the Windows PC and your 
camera.
1Drag [NO NAME] on the desktop to the trash.If the SD Memory Card has a volume label, drag the icon of that...

194
7Connecting to a Computer
Using the Provided Software
The following software is included on the provided CD-ROM.
Image viewing/managing/editing software 
“MediaImpression 3.6.2 LE” (for Windows)
“MediaImpression 2.2 LE” (for Macintosh)
Languages: English, French, German, Spanish, Portuguese, Italian, Dutch, Swedish, 
Russian, Korean, Chinese (traditional and simplified), Japanese
The following system requirements must be met for you to fully enjoy the images 
captured with the camera on a computer....

195
7Connecting to a Computer
Install the image viewing/managing/editing software “MediaImpression”.
This section outlines installation steps on Windows 7 as an example.
1Turn your Windows PC on.
2Insert the provided CD-ROM into the CD/DVD drive.If the installation screen appears, go to step 5.
Macintosh
OSMac OS X 10.6, 10.7, 10.8
CPU Power PC G4 800 MHz, or equivalent (Intel
® Core™ 2 Duo, or higher recommended)
Memory 512 MB (1GB or higher recommended)
HDD volume 300 MB available hard disk space (1GB...

196
7Connecting to a Computer
3Click [Computer] in the Start menu.
4Double-click the CD/DVD drive icon.The installation screen appears.
5Click [MediaImpression 3.6.2 LE].
6Choose a language in the “Choose Setup Language” screen 
and click [OK].
The setup screen appears. Follow the on-screen guidance and install the 
software.
7Select the file format to use and 
click [Next].
All files in the checked format will open with 
MediaImpression. Remove the check to 
open the file using another application....

197
7Connecting to a Computer
1Turn your Macintosh on.
2Insert the provided CD-ROM into the CD/DVD drive.
3Double-click the CD-ROM icon.
4Double-click the [Software Installer] icon.
The installation screen appears.
5Click [MediaImpression 2.2 LE].
The setup screen appears. Follow the on-
screen guidance and install the software.
6Click [Close].
Installation is complete.
7Click [Exit] on the installation screen.The window is closed.
Macintosh 

198
7Connecting to a Computer
In order to better serve you, we request that you complete the product 
registration.
If the computer is connected to the Internet, 
please click [Product Registration] on the 
installation screen.
The world map screen shown on the right for 
Internet Product Registration is displayed. Click 
the displayed country or region and then follow 
the instructions to register your product.
Only customers in countries and regions 
displayed on the software installation screen 
can...