Ricoh Projector PJ X2240 User Manual
Here you can view all the pages of manual Ricoh Projector PJ X2240 User Manual. The Ricoh manuals for Projector are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
59
Input Select
Select an input source from the drop down list.
Adjusting the Settings
Image
[Brightness]Adjust brightness by clicking [+] or [-]. Click [Reset] to return the default value 0.
(See p.39 on the Projector User's manual)
[Contrast]Adjust contrast by clicking [+] or [-]. Click [Reset] to return the default value 0.
[Sharpness]Adjust sharpness by clicking [+] or [-]. Click [Reset] to return the default value 0.
[Picture mode]Select a picture mode from the drop down list.
Audio...](http://img.usermanuals.tech/thumb/64/99949/w300_projector_manual_8788_d-60.png "Page 61
59
Input Select
Select an input source from the drop down list.
Adjusting the Settings
Image
[Brightness]Adjust brightness by clicking [+] or [-]. Click [Reset] to return the default value 0.
(See p.39 on the Projector User's manual)
[Contrast]Adjust contrast by clicking [+] or [-]. Click [Reset] to return the default value 0.
[Sharpness]Adjust sharpness by clicking [+] or [-]. Click [Reset] to return the default value 0.
[Picture mode]Select a picture mode from the drop down list.
Audio...")
59 Input Select Select an input source from the drop down list. Adjusting the Settings Image [Brightness]Adjust brightness by clicking [+] or [-]. Click [Reset] to return the default value 0. (See p.39 on the Projector User's manual) [Contrast]Adjust contrast by clicking [+] or [-]. Click [Reset] to return the default value 0. [Sharpness]Adjust sharpness by clicking [+] or [-]. Click [Reset] to return the default value 0. [Picture mode]Select a picture mode from the drop down list. Audio...
Page 62
![Page 62
60
Network Settings
Projector Setting
Projector name which is displayed in this web page can be
changed.
Enter a new projector name in the box and clock [Apply] button.
PJLink setting
Settings of PJLink password can be changed in this section.
-Change the password.
Confirm "Enable" is checked in PJLink password.
Enter the current password in current password box.
Default password is "admin".
Enter a new password in both New Password box and Confirm
Password box.
Click [Apply] button.
...](http://img.usermanuals.tech/thumb/64/99949/w300_projector_manual_8788_d-61.png "Page 62
60
Network Settings
Projector Setting
Projector name which is displayed in this web page can be
changed.
Enter a new projector name in the box and clock [Apply] button.
PJLink setting
Settings of PJLink password can be changed in this section.
-Change the password.
Confirm \"Enable\" is checked in PJLink password.
Enter the current password in current password box.
Default password is \"admin\".
Enter a new password in both New Password box and Confirm
Password box.
Click [Apply] button.
...")
60 Network Settings Projector Setting Projector name which is displayed in this web page can be changed. Enter a new projector name in the box and clock [Apply] button. PJLink setting Settings of PJLink password can be changed in this section. -Change the password. Confirm "Enable" is checked in PJLink password. Enter the current password in current password box. Default password is "admin". Enter a new password in both New Password box and Confirm Password box. Click [Apply] button. ...
Page 63
![Page 63
61
-Enable the password when disabled.
Check "Enable" in PJLink password.
Enter a new password in both New Password box and Confirm
Password box.
Click [Apply] button.
-Disable the password when enabled.
Check "Disable" in PJLink password.
Enter the current password in current password box.
Click [Apply] button.
Network setting
Network settings such as IP address can be set in this section.
DHCP, IP address, and Default gateway can be also set OSD
menu in the projector.
DNS Server...](http://img.usermanuals.tech/thumb/64/99949/w300_projector_manual_8788_d-62.png "Page 63
61
-Enable the password when disabled.
Check \"Enable\" in PJLink password.
Enter a new password in both New Password box and Confirm
Password box.
Click [Apply] button.
-Disable the password when enabled.
Check \"Disable\" in PJLink password.
Enter the current password in current password box.
Click [Apply] button.
Network setting
Network settings such as IP address can be set in this section.
DHCP, IP address, and Default gateway can be also set OSD
menu in the projector.
DNS Server...")
61 -Enable the password when disabled. Check "Enable" in PJLink password. Enter a new password in both New Password box and Confirm Password box. Click [Apply] button. -Disable the password when enabled. Check "Disable" in PJLink password. Enter the current password in current password box. Click [Apply] button. Network setting Network settings such as IP address can be set in this section. DHCP, IP address, and Default gateway can be also set OSD menu in the projector. DNS Server...
Page 64
![Page 64
62
Enter the current password in current password box.
Enter a new password in both New Password box and Confirm
Password box.
Click [Apply] button.
-Enable the password when disabled.
Check "Enable" in PJLink password.
Enter a new password in both New Password box and Confirm
Password box.
Click [Apply] button.
-Disable the password when enabled.
Check "Disable" in Administrator or User.
Enter the current password in current password box.
Click [Apply] button.
Alert Setting
Alert...](http://img.usermanuals.tech/thumb/64/99949/w300_projector_manual_8788_d-63.png "Page 64
62
Enter the current password in current password box.
Enter a new password in both New Password box and Confirm
Password box.
Click [Apply] button.
-Enable the password when disabled.
Check \"Enable\" in PJLink password.
Enter a new password in both New Password box and Confirm
Password box.
Click [Apply] button.
-Disable the password when enabled.
Check \"Disable\" in Administrator or User.
Enter the current password in current password box.
Click [Apply] button.
Alert Setting
Alert...")
62 Enter the current password in current password box. Enter a new password in both New Password box and Confirm Password box. Click [Apply] button. -Enable the password when disabled. Check "Enable" in PJLink password. Enter a new password in both New Password box and Confirm Password box. Click [Apply] button. -Disable the password when enabled. Check "Disable" in Administrator or User. Enter the current password in current password box. Click [Apply] button. Alert Setting Alert...
Page 65
![Page 65
63
[To], [Cc] Enter an alert mail destination.
Only one destination can be entered in each
destination.
[Subject] Enter subject of an alert mail.
[From] Enter a sender of an alert mail.
Click [Apply] to apply settings.
-SMTP Setting
Enter SMTP mail server address in the box.
Click [Apply] to apply settings.
-Alert Condition
Check alert mail conditions that you desire.
Fan Lock
An alert mail is sent when a cooling fan is stopped.
The body of the mail is "Fan Lock:xxx.xxx.xxx.xxx*"
Over...](http://img.usermanuals.tech/thumb/64/99949/w300_projector_manual_8788_d-64.png "Page 65
63
[To], [Cc] Enter an alert mail destination.
Only one destination can be entered in each
destination.
[Subject] Enter subject of an alert mail.
[From] Enter a sender of an alert mail.
Click [Apply] to apply settings.
-SMTP Setting
Enter SMTP mail server address in the box.
Click [Apply] to apply settings.
-Alert Condition
Check alert mail conditions that you desire.
Fan Lock
An alert mail is sent when a cooling fan is stopped.
The body of the mail is \"Fan Lock:xxx.xxx.xxx.xxx*\"
Over...")
63 [To], [Cc] Enter an alert mail destination. Only one destination can be entered in each destination. [Subject] Enter subject of an alert mail. [From] Enter a sender of an alert mail. Click [Apply] to apply settings. -SMTP Setting Enter SMTP mail server address in the box. Click [Apply] to apply settings. -Alert Condition Check alert mail conditions that you desire. Fan Lock An alert mail is sent when a cooling fan is stopped. The body of the mail is "Fan Lock:xxx.xxx.xxx.xxx*" Over...
Page 66
64 Since no error will be reported even if any error is occurred in sending a test mail. Check if the test mail is arrived to destination mail box. The body of the mail is "Email Test:xxx.xxx.xxx.xxx" * "xxx.xxx.xxx.xxx" means IP address of the projector. (ex. 192.168.0.100) Logout Click Logout tab to logout from this projector control web site. This page will appear for 2 seconds and then jump to login page. Be sure Email settings and SMTP settings are correct. Email test is...
Page 67
65 Control the Projector via the Projector Management Utility Projector Management Utility conforms to the PJLink class 1 standards, and is compatible with all class 1 commands. A maximum of 100 projectors connected to the network can be managed using one computer. Projector Management Utility operating environment is described below. • Supported operating system • Windows Vista (32-bit/64bit version) Ultimate, Business, Home Premium, Home Basic • Windows 7 (32-bit/64bit version) Home Premium,...
Page 68
![Page 68
66
5. Double-click "setup.exe" stored in the "Projector Management
Utility" folder.
6. Install the application by following the on-screen instruction.
7. When the installation is complete, exit the installer.
A shortcut icon is created on the desktop.
Register projectors
1. Registers the projectors with Auto search
-Click [Register Projector] button.
-Click [Auto Search] button.
This software is to control and monitor projectors manufactured by our company. The software may not work...](http://img.usermanuals.tech/thumb/64/99949/w300_projector_manual_8788_d-67.png "Page 68
66
5. Double-click \"setup.exe\" stored in the \"Projector Management
Utility\" folder.
6. Install the application by following the on-screen instruction.
7. When the installation is complete, exit the installer.
A shortcut icon is created on the desktop.
Register projectors
1. Registers the projectors with Auto search
-Click [Register Projector] button.
-Click [Auto Search] button.
This software is to control and monitor projectors manufactured by our company. The software may not work...")
66 5. Double-click "setup.exe" stored in the "Projector Management Utility" folder. 6. Install the application by following the on-screen instruction. 7. When the installation is complete, exit the installer. A shortcut icon is created on the desktop. Register projectors 1. Registers the projectors with Auto search -Click [Register Projector] button. -Click [Auto Search] button. This software is to control and monitor projectors manufactured by our company. The software may not work...
Page 69
67 -List of projectors which support PJLink are displayed in the window. Projector name is displayed as “********” until authorization if password is enable. English English LAN Control English
Page 70
![Page 70
68
-Select the desired projector and click [Register] button.
Password authorization is required if password of the projector
is set to enable.
-Click [OK] button to return to the original screen.
2. Directly specifies the IP address and registers the projector.
-Enter IP address of the desired projector and click [Confirm]
button then the projector name will be displayed. After
confirming the projector name, click [Register] button.
Control the projector with the projector Management
Utility
Click...](http://img.usermanuals.tech/thumb/64/99949/w300_projector_manual_8788_d-69.png "Page 70
68
-Select the desired projector and click [Register] button.
Password authorization is required if password of the projector
is set to enable.
-Click [OK] button to return to the original screen.
2. Directly specifies the IP address and registers the projector.
-Enter IP address of the desired projector and click [Confirm]
button then the projector name will be displayed. After
confirming the projector name, click [Register] button.
Control the projector with the projector Management
Utility
Click...")
68 -Select the desired projector and click [Register] button. Password authorization is required if password of the projector is set to enable. -Click [OK] button to return to the original screen. 2. Directly specifies the IP address and registers the projector. -Enter IP address of the desired projector and click [Confirm] button then the projector name will be displayed. After confirming the projector name, click [Register] button. Control the projector with the projector Management Utility Click...