Ricoh Projector PJ X2240 User Manual

49
 Reset
  Return the adjustments and settings to the factory default values.
Choose “Yes” to return the display parameters on all menus 
except Language and Lamp Hours Used to the factory default 
settings. LAN Control settings also return to the factory default. 
Set again after reset.
English 
English
User Settings
English   

50
Volume
 Mute
 
Temporarily turn off the sound.
  Choose “On” to mute the sound.
  Choose “Off” to turn mute off.
 Volume
  Adjust the volume level.
  Press the  key to decrease the volume.
  Press the  key to increase the volume.
	“Volume” menu is not available on RICOH PJ S2240/RICOH PJ TS100.
Note
	“Mute” function affects both internal and external speaker volume.
Note 
English
User Settings   

51
Options
 Auto Source
 
When this function is turned “On”, the projector will search for 
other signals if the current input signal is lost. When this function is\
 
turned “Off”, it will only search a specified connection port.
 Input
Use this option to enable/disable input sources. Press the ► key 
to enter the sub menu and select which sources you require. Press 
“Enter” to finalize the selection. The projector will only search for 
inputs that are enabled.
 Auto Power Off (Min)
 
Sets the countdown...

52
 Lamp Settings
 
Use this option to view the lamp life status and configure the lamp 
settings. Press the ► key to enter the sub menu and configure the 
desired settings.
   Lamp Hours Used (Normal): Display the projection time.
Lamp Hours Used in Eco mode or “Image Eco” mode “On” will 
be converted to Lamp Hours Used in “Normal” mode.
   Lamp Life Reminder: Choose this function to show or to hide 
the warning message when the changing lamp message is 
displayed. The message will appear 30 hours...

53
 Dust Filter Reminder
 Use this option to view the filter status and configure the filter settings. Press the ► key to enter the sub menu and configure the desired settings.
This item is disabled for the projector sold in some regions.
   Filters Remind (Hour): Set the maximum filter time usage.
   Cleaning Up Reminder: Choose this function to show or hide the warning message when the changing filter message is displayed.
If the reminder function is enabled and the usage time reached its limit, a...

54
3D
 3D
 
Use this option to enable/disable the 3D function. 
 Off: Choose “Off” to display normal (2D) picture.
 On: Choose “On” to display 3D format.
 3D Sync Invert
  Use this option to enable/disable the 3D sync invert function.
 Off: Choose “Off” for default frame contents.
  On: Choose “On” to invert left and right frame contents. Choose 
“On” if viewing image is not natural or felt 3D incorrect. 
 3D Format
  Use this option to select the appropriate 3D format content.
  Side by Side: Use...

55
How to use web browser to control 
your projector
Connecting to the projector
1. Check IP address of the projector
Check IP address in “Settings” > “Network” in the projector \
menu system. (See page 44 on the projector user’s manual).
2. Connect
Open your web browser and type in the IP address you checked. 
For example, type “http://192.168.0.100” when IP address is 
displayed as the screen above.
Login
1. The web browser shows a login page
	If you want to connect an existing network system,...

56
	The warning message “Invalid Character” will popup if your password is incorrect.
	“B01” showed in the top in the web page picture indicates software version of this web page. It may be different from “B01”.
Note
2. Select a user
You can use all functions (Control Panel, Network setting and 
Alert setting) when you select “administrator”. And you can use 
only “Control Panel” when you select “user”.
3. Enter the Password
If the password setting is enabled the correct password needs to 
enter....

57
Home
This is Home page which shows basic information of your 
projector. There is no control on this page.
1. Projector Status
System Status:
It shows the current system status of the projector. It includes 
Standby, Warm-up, Power-on, cooling, Power-off and 
Unknown.
-Input:
[PJ X5460][PJ WX5460]
It shows the current input source of the projector. It includes 
Computer 1, Computer 2, S-Video, Video, HDMI, None and 
Unknown.
-Lamp Hours: 
It shows the current lamp hours of the projector.
-FW Version:...

58
Projector Control Panel
This page shows the control items of your projector. User can 
control the projector by this page.
Control Buttons
Execute a function when the button is clicked.
[Power ON]Power is turned on.
[Power OFF]Power is turned off.
[Auto Set]Automatically adjust the RGB signal from the computer.
[Input]Switch among Computer1, Computer2, Video, S-Video, and HDMI.
Setting Buttons
Setting is toggled On and Off by clicking the button.
[Auto Source]Search the next signal source...