Ricoh Projector PJ WXL6280 User Manual

							21
Notice: Users in the EU
Note for the Battery and/or Accumulator Symbol
In accordance with the Battery Directive 2006/66/EC Article 20 Information for end-users Annex II, the above symbol is printed on batteries and accumulators. This symbol means that in the European Union, used batteries and accumulators should be disposed of separately from your household waste. In the EU, there are separate collection systems for not only used electrical and electronic products but also batteries and \
accumulators. Please dispose of them correctly at your local community waste collection/recycling centre.
Notice: Users in Taiwan
.Šf£
						

							22
OSD Tree .............................................47
Picture Menu ........................................53
Output Menu .........................................58
Setup Menu ..........................................61
Option Menu .........................................63
Appendices 66
Troubleshooting ....................................66
Image Problems ...............................66
Projector Problems  ..........................69
On Screen Messages ......................72
Compatibility Modes .............................73
Inputs ...............................................73
PIP/PBP Compatibility .....................75
RS232 Pin Assignments .......................76
Specifications .......................................77
Cabinet dimension ................................79
Trademarks ..........................................80
Safety Information ..................................2
Regulation & Safety Notices .................17
Introduction 23
Product Features ..................................23
Package Overview  ...............................24
Product Overview .................................25
Projector Components .....................25
Built-in Keypad .................................28
Input/Output (I/O) Panel ...................29
LED Status Indicators ......................30
Remote Control ................................31
Remote Control Battery Installation .33
Remote Control Operating Range ...34
Installation 35
Adjust the Projector Position ................35
Removing and Installing the Lens  ........36
Adjusting the Projected Image .............37
Adjusting the Projector’s Height .......37
Connect to Computer ...........................38
Connect to Video Equipment ................39
Turn the Projector On ...........................40
Turn the Projector Off ...........................41
Projection Lens .....................................42
A3 is the standard lens for WXGA and 
WUXGA. ...............................................42
Adjusting the Projecting Image’s  
Position .................................................44
User Controls 46
OPERATION  ........................................46
Table of Contents  
						

							23
• WXGA: One panel 0.65”-WXGA projection system
• WUXGA: One panel 0.67”-WUXGA projection system
• 6,000 ANSI lumens platform for WXGA (typical) and WUXGA (typical)
• Power Zoom/Focus and full lens shift (1/2 screen, V +/- 100%, H +/- 30%)
• Support LAN network control and HDBaseT for video streaming
• Support PIP/PBP function
• Support 360 degrees & portrait mode projection. (With optional safety cover and 
portrait by input source)
Introduction
Product Features 
						

							24
Power Cord
Unpack and inspect the box contents to ensure all parts listed below are\
 in 
the box. If something is missing, please contact our customer service.
Documentation:
 yUser’s Manual (CD)
 yRead This First (Paper)
Projector with lens cover
Package Overview
VGA Cable
Remote Control
ONOFF213546879
GammaBrightCont.PIP
0InfoModeAutoInput
MenuExit
Hot KeyAV MutePattern
FocusLens H
Lens V
Keystone H Keystone VZoom
Enter
AAAA
AAA(R03) Batteries x 2(For remote control)
  Due to different applications in each Country, some regions may have different accessories.  
						

							25
Product Overview
The product specified in this document is a high brightness, high-resolution video/
graphics 1-chip laser based projector. The projector is available in WXGA and 
WUXGA resolutions. The projector utilizes Digital Light Processing (DLP®) technol-
ogy from Texas Instruments. It is primarily designed for fixed installation markets.
Front View
Ind.Part NameDescription
1Front IR ReceiverReceives signals from the IR remote. Keep the signal path to the sensor unobstructed for uninterrupted communication with the projector.
2Projection LensAllows  automated  lens  control  and  adjustment: vertical and horizontal offsets, zoom and focus.
3Lens RingProtects the lens motors and mechanism. Remove in order to insert or remove the lens.
4Adjustable FeetRaise or lower the feet to level the projector.
Projector Components
1
2
3
4 
						

							26
Rear View
Ind.Part NameDescription
1LED Status IndicatorsDisplays the status of the projector.
2Top IR SensorReceives  signals  from  the  IR  remote.  Keep  the  signal path unobstructed for uninterrupted communication with the projector.
3Connector panelConnects the projector to external devices.
4Power SwitchSwitch the power button to turn on the power source.
5Power ConnectorConnect to the supplied power adapter.
6Kensington LockUse to secure the projector to countertops, tables, etc.
7Security barUse to secure the projector.
8Inlet VentKeep these vents unobstructed to prevent the projector from overheating.
9Keypad Panel Controls the projector.
12
3
4
56789 
						

							27
Left View
Right View
Ind.Part NameDescription
1Inlet VentKeep these vents unobstructed to prevent the projector from overheating.
2Outlet VentKeep these vents unobstructed to prevent the projector from overheating.
Things to note when installing projectors
• Leave 1 m or over space between the projectors when projectors are installed side by side, so that intake and exhaust vents of the projectors are not obstructed. In addition, leave a space of at least 30 cm between the intake/exhaust vent and the wall. When the air intake and discharge outlet are obstructed, the temperature inside the projector will rise and this may result in a malfunction.
1 m or greater
1
2 
						

							28
Ind.Part NameDescription
1PowerTurn the projector on or off.
2MenuDisplay menus.
3EnterConfirm a selection.
4ExitReturn to previous level or exit menus if at top level.
5Arrow Keys• Adjust a setting UP or DOWN.• Navigate within a menu.
6AV MuteDisplay or blank the video image.
7InputSelect an input for the main or PIP/PBP image.
8ZoomAdjust zoom.
9FocusAdjust focus.
10AutoAutomatically optimize image.
11LensAdjust the lens vertical or horizontal offset setting.
Built-in Keypad
1234
567891011 
						

							29
1234
Ind.Connector NameInd.Connector Name
1HDBaseT7LAN
2Remote In/Out8USB
3HDMI9Service
4Computer IN10PC Control
5Monitor Out11Component IN
6DVI-D
 
Input/Output (I/O) Panel
56
7891011 
						

							30
The LED status indicators are located on the rear of the projector. Each\
 LED is 
defined below.
LED TypeLED StatusProjector State
Light LED
OffLaser diode is off
Solid OrangeLaser diode time has expired
Solid GreenLaser diode is on and operating correctly
Flashing RedWhen projector has lost over 60% initial luminance
Status LED
OffAC power is off (without AC plug in)
Off
AC has been applied, projector is in standby mode
NOTE: Status LED cannot be flashing red, as this is reserved for an error condition. Status LED is off but keypad LED will indicate Standby Mode.
Solid GreenProjector is powered up and operating normally
Flashing GreenProjector communications
Flashing OrangeProjector is in cool down mode or startup mode
Flashing (alternating) Green/OrangeProjector is in flash update state
Solid RedOver-temperature
Flashing RedFan failure
AV MuteSolid GreenLight is on - image is displayed
Solid OrangeLight is on - image is blank
LED Status Indicators