Ricoh Projector PJ WX4152N User Manual

							Item
Default
Interactive > Interactive Mode (RICOH PJ WX4152NI only) Specify whether or not to enable the interactive mode. For details about
the interactive mode, see page 83 "Using the Interactive Function
(RICOH PJ WX4152NI only) ".
The interactive mode and 3D projection cannot be enabled
simultaneously. If you change this setting to [On], [3D Projection] in
[Display/Sound Settings] is switched to [Off]. Off
Interactive > PC Adapter Registration (RICOH PJ WX4152NI only) Register the computer USB adapter to the projector to use the interactive
mode. For details about how to register the computer USB adapter, see
page 85 "Registering the Computer USB Adapter".
This function is not available when you select [Video] as an input signal. - Default Settings 1 Menu
119  
						

							Default Settings 2 Menu
Item
Default
Language Select the display language.
Available languages are as follows:
English, Japanese, Spanish, Russian, French, Portuguese, German,
Italian, Dutch, Polish, Swedish, Norwegian, Danish, Romanian, Turkish,
Arabic, Thai, Indonesian, Traditional Chinese. English
Current Time > Date/Time Specify the current date and time. (Not programmed)
Current Time > Time Zone Specify the time zone of the location where the projector is used by
selecting the time difference to UTC (Coordinated Universal Time). +0:00
Power Timer > Timer Projection Specify whether or not to enable the power timer function.
When you enable this function, the projector automatically starts
projection and turns off at the specified time. If you select [On], specify
[Projection Day] and [Projection Time] to enable this function. Off
Power Timer > Projection Day Select a day of the week to start projecting using the power time function. (Not programmed)
Power Timer > Projection Time Specify the time to start and end projecting using the power timer
function. An interval of at least ten minutes is required between the startup
time and the end time. (Not programmed)7. Changing the Projector Settings
120  
						

							Item
Default
Projection Mode Select the projection method according to how the projector is
positioned.• Standard
Select this mode when the projector is placed in front of a screen.
•
Rear
Select this mode when the projector is placed behind a screen.
• Ceiling Select this mode when the projector is mounted on the ceiling in front
of a screen.
• Rear Ceiling Select this mode when the projector is mounted on the ceiling behind
a screen. Standard
Remote Control ID Select the projector remote control ID. Specify the ID for each projector
when operating multiple projectors using one remote control.• 1
•

2
• 3
• 4 1
Direct Power On Select the power on method of the projector.• Off Turn the projector on when the [Power] button is pressed.
•

On
Automatically turn on the projector when the power cord is
connected. Off
Start on Input Detection Specify whether or not to start projecting automatically if the signals are
input while in standby. On Default Settings 2 Menu
121  
						

							Item
Default
High Altitude Mode The number of fan rotations is high when set to [On]. The air is thin at high
elevations, so the cooling efficiency of the projector is reduced. Select
[On] when using the projector at an altitude of more than 1,500 meters
(4,921 feet). Do not select [On] when the altitude is less than 1,500
meters (4,921 feet). Off
Key Lock Specify whether or not to lock the buttons on the control panel. You can
change this setting to [Off] by pressing the [AV Mute] button on the
projector's control panel for 10 seconds. Off
Reset All Reset all menus to their defaults.
This function cannot restore the default settings of [User Logo] in [Default
Settings 1], [Current Time] and [Startup Password] in [Default Settings 2],
[Administrator Authentication] and [Administrator Password] in [Network
Application Settings]. -
Startup Password > Register Password Enter a 6-digit password. The current password is required to change the
password. 000000
Startup Password > Password Protect Specify whether or not to enter a password when the projector is turned
on. If this is selected, a password must be entered when the projector is
turned on after the power cord has been unplugged. However, a
password is not required when turning the projector on from the standby
mode.
A password is required to change this setting. Off7. Changing the Projector Settings
122  
						

							USB Settings Menu
This section explains the items in USB Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the USB Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Remove USB Mem.] in [Settings]
•
[USB Memory Free Space (KB)] and [USB Memory Access Status] in [Display Status]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] on the top page.
For details about Web Image Monitor, see page 166 "Managing the Projector Using Web Image
Monitor".
Settings Still Image
Item
Default
Display Effect Select the display effect for switching the image.• None
•

Push
The current image is pushed off by the next image.
• Wipe The current image is wiped off by the next image.
• Fade The current image fades out and the next image fades in. None
Display Interval (sec.) Enter the slide show switching interval from 5 to 999 seconds. 5 secondsMoving Image
Item
Default
Repeat Specify whether or not to repeat video playback. Off USB Settings Menu
123  
						

							Common
Item
Default
Auto Start Slideshow Specify whether or not to start a slide show automatically when the
projector is connected to the USB device. Off
Remove USB Mem. The USB device can be removed when this command is executed. -Display Status
USB Memory
Item
Default
USB Memory Free Space (KB) Display the space available on the USB device (Displayed in KB). -
USB Memory Access Status Display whether or not the USB device can be accessed. -Firmware Version
Item
Default
Network/USB Func. Firmware Version Display the firmware version of the network and USB functions. -7. Changing the Projector Settings
124  
						

							Network Settings Menu
This section explains the items in Network Settings menu under the Network/USB Settings menu tab.
You can also specify and check the items in the Network Settings menu using Web Image Monitor.
However, the following items are available only on the menu screen.
• [Simple Wireless LAN Setup], [EAP Type], [Import Client Certificate], [Client Certificate User
Name], [Client Certificate List], [Import CA Certificate], [CA Certificate List], [Delete Client/CA
Certificate], [MS-CHAP v2 User Name], [MS-CHAP v2 Password], [Windows Domain Name],
[Server Certificate Authentication], [Intermediate CA Permission], [WPA/WPA2-EAP Connection
Check], and [Reset Wireless LAN Settings] in [Wireless LAN]
•
[Network Setting Wizard] in [Setup Wizard]
On Web Image Monitor, you can check [Network/USB Func. Firmware Version] on the top page.
For details about Web Image Monitor, see page 166 "Managing the Projector Using Web Image
Monitor".
Wired LAN Wired LAN Settings
Item
Default
Wired LAN Specify whether to enable or disable wired LAN. Enable
Transmission Speed Select a wired LAN speed that matches your network environment. It
is recommended that [Auto-Negotiation] be selected.• Auto-Negotiation
•

10BASE-T Full Duplex
• 10BASE-T Half Duplex
• 100BASE-TX Full Duplex
• 100BASE-TX Half Duplex Auto-Negotiation Network Settings Menu
125  
						

							TCP/IP Settings
Item
Default
DHCP Specify whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when
[Enable] is selected. When [Disable] is selected, enter the IP address,
subnet mask, and default gateway manually. Enable
IP Address Enter the projector's IP address. 0.0.0.0
Subnet Mask Enter the subnet mask. 0.0.0.0
Default Gateway Enter the default gateway. 0.0.0.0Wireless LAN
Simple Settings
Item
Default
Simple Wireless LAN Setup Acquire the wireless LAN settings registered in the access point, and
specify infrastructure mode wireless LAN settings for the projector
automatically.
This function may not work depending on the access point. -Wireless LAN Settings
Item
Default
Wireless LAN Specify whether to enable or disable wireless LAN. Enable7. Changing the Projector Settings
126  
						

							Item
Default
Communication Mode Select the wireless LAN communication mode.• Infrastructure
Select this mode when you want to connect the projector to a
wireless LAN network. You need to specify [SSID] and items in
[Security] and [TCP/IP Settings] in this mode.
•
Adhoc
Select this mode when you want to connect the projector and
the computer directly. The projector specifies [SSID] and items in
[Security] and [TCP/IP Settings] automatically in this mode. Adhoc
SSID Enter the SSID to connect to a wireless LAN network when
[Infrastructure] is selected. Enter up to 32 characters. (blank)
Channel Select the channel to use when [Adhoc] is selected.
Select the channel that matches the type of wireless LAN being used.
The channels available might differ depending on the country.• 2.4 GHz: 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 11TCP/IP Settings
Item
Default
DHCP Specify whether to enable or disable DHCP.
The IP address is allocated automatically from the DHCP server when
[Enable] is selected. If you select [Disable], manually enter the IP
address, subnet mask, and default gateway. Enable
IP Address Enter the projector's IP address. 0.0.0.0
Subnet Mask Enter the subnet mask. 0.0.0.0 Network Settings Menu
127  
						

							Item
Default
Default Gateway Enter the default gateway. 0.0.0.0Security
Item
Default
Authentication Method Select the wireless LAN authentication method.• Open System
•
WEP Shared Key
• WPA/WPA2-PSK
• WPA2-PSK
• WPA/WPA2-EAP
• WPA2-EAP Open System
Encryption Method Select the wireless LAN encryption method.• No Encryption
Communication is not encrypted. You can select [No Encryption]
if you select [Open System] in [Authentication Method].
•

WEP
You can select [WEP] if you select [Open System] in
[Authentication Method].
[WEP] is selected automatically when you select [WEP Shared
Key] in [Authentication Method].
• TKIP/CCMP [TKIP/CCMP] is selected automatically when you select [WPA/
WPA2-PSK] or [WPA/WPA2-EAP] in [Authentication Method].
• CCMP [CCMP] is selected automatically when you select [WPA2-PSK]
or [WPA2-EAP] in [Authentication Method]. No Encryption7. Changing the Projector Settings
128