Ricoh Projector PJ WX3351N User Manual

Freezing the Image
Freezes the video or moving image that is being projected.1. Press the [Freeze] button.
The image freezes.
2. To unfreeze the image, press the [Freeze] button again.
• An icon () appears on the screen when freeze is used.
• The Freeze function is canceled automatically if any operation is performed. • The Freeze function is for freezing the image projected on the screen. To pause the video of the connected equipment, use the pause function of the connected equipment.
Specifying the...

1.Press the [Eco] button.
2.In [Eco Mode], select [On (Auto)], [On (Detailed)], or [Off].
3. If you selected [On (Detailed)] in Step 2, specify [Lamp Power], [Lamp Pwr on No
Signal], and [Image Eco] manually.
4. Press the [Eco] button.
• You can also change the lamp settings with [Energy Saving Settings]. For details, see page 102
"Energy Saving Settings Menu".
• The image may flicker, depending on the characteristics of the lamp, when the power is cut by the Eco Mode. If this happens, disable...

3. Projecting Images from a USB
Memory Device or Digital Camera
This chapter explains how to project images from a USB memory device or digital camera.
Requirements for Projecting Images from a USB Device
• It is recommended to back up the data saved to a USB device before using it. The manufacturer is not responsible for any damage due to the loss of data.
• Do not disconnect the power plug while the USB device is being accessed. Doing so may cause malfunction or data loss.
• The USB devices must...

ItemRequirementsVideo compression format• MPEG2 when the container format is MPEG2-PS or MPEG2-TS
• H.264 when the container format is MP4 or QuickTime
Audio compression format
• MPEG1/2-Audio Layer2 when the container format is MPEG2-PS or MPEG2-TS
• Linear PCM when the container format is MPEG2-PS or QuickTime
• AAC-LC when the container format is MP4 or QuickTimeContainer formatMPEG2-PS, MPEG2-TS, MP4, QuickTimeFrame rateLess than 30 fpsBit rateLess than 20 Mbps (recommended)
• The maximum number of...

How to Project Images from USB Memory
Device
For basic operations, such as how to turn on the projector or adjust the focus, see page 37 "Projecting
an Image".
Connecting the USB Device
Connect the USB memory device or digital camera to the projector.
The USB device can be connected even if the projector is already on.
1. Connect the USB device to the USB port on the projector.
Check the port orientation before connecting.
• If the projector does not recognize the USB device when it is connected,...

1.If [USB Memory] is not selected as the input signal, press the [Input] button.
2.Switch the input signal to [USB Memory].
For details about how to switch the input signal, see page page 38 "Projecting an Image".
The files within the root directory are displayed.
3. Select the file, [Slideshow], or folder, and then press the [Enter] button.
• When a file is selected
If you select a JPEG file, its image is projected. If you select an MPEG file, the video plays.
• When [Slideshow] is selected A...

Controlling the Projected Image
Use the remote control to control a projected still image or video.
How to control a still image
• [Enter] button: Starts the slide show from the projected image. Stops the slide show that is inprogress.
• [
] button: Displays the next image.
• [
] button: Displays the previous image.
• [
] button: Rotates the image 90° to the right.
• [
] button: Rotates the image 90° to the left.
• [Menu] button: Returns to the [USB File Projection] screen.
How to control a video
•...

• A USB device can also be disconnected by selecting [Remove USB Mem.] in [USB Settings].
3. Projecting Images from a USB Memory Device or Digital Camera
56   

Projecting Images in a Slide ShowProjecting a Slide Show at a Specified Time
You can project a slide show of files on a USB device at a specified time.This function is useful if you want to use the projector to decorate a shop window with projected images
according to the shop's business hours, for example.
Specify the following two settings to use this function:
• Power Timer Use this setting to specify the day and time to project a slide show.
• Auto Start Slideshow Enable this setting to...

2.Select [Default Settings 2], and then press the [] button.
3.Select [Power Timer], and then press the [Enter] button.
4. Select [Timer Projection], and then press the [Enter] button.
5. Select [On], and then press the [Enter] button.
6.Select [Projection Day], and then press the [Enter] button.
7. Select a day to project the slide show (Sunday in this example), and then press the [Enter]
button.
3. Projecting Images from a USB Memory Device or Digital Camera
58 DHY101 DHY102