Ricoh Projector PJ WUL6280 User Manual
Have a look at the manual Ricoh Projector PJ WUL6280 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Read this manual carefully before you use this machine and keep it handy for futur e refer ence. For safe and correct use, be sure to r ead the Pr ecautions in this manual befor e using the machine. Appendices User Controls Installation Intr oduction 4. 3. 2. 1. User’ s Manual RICOH PJ WUL6280/PJ WXL6280 RICOH PJ LU6000 Series/PJ L W6000 Series
2 Safety Information This chapter describes safety information for this machine. Information Introduction This manual contains detailed instructions and notes on the operation an\ d use of this machine. For your safety and benefit, read this manual carefully before using the machine. Keep this manual in a handy place for quick reference. Important Contents of this manual are subject to change without prior notice. In no event will the company be liable for direct, indirect, special, incidental, or consequential damages as a result of handling or operating the machine. Some illustrations in this manual might be slightly different from the machine. Caution The manufacturer shall not be responsible for any damage or expense that might result from the use of parts other than genuine parts from the manufacturer with your office products.
3 Safety Information When using this machine, the following safety precautions should always be fol- lowed. Safety During Operation In this manual, the following important symbols are used: WARNING Indicates a potentially hazardous situation which, if instructions are not followed, could result in death or serious injury. CAUTION Indicates a potentially hazardous situation which, if instructions are not followed, may result in minor or moderate injury or damage to property. Safety Precautions to Be Followed This section explains safety precautions that should always be followed when using this machine. Environments where the machine can be used This section explains safety precautions about environments where the machine can be used. WARNING Do not place vases, plant pots, cups, toiletries, medicines, small metal objects, or containers holding water or any other liquids, on or close to this machine. Fire or electric shock could result from spillage or if such objects or substances fall inside this machine. WARNING Keep the product and attachments out of the reach of children. If the pr\ oduct is near children, it might fall over and cause an injury.
4 CAUTION Keep the machine away from humidity and dust. Otherwise a fire or an elec- tric shock might occur. CAUTION Do not place any objects on the machine. Doing so may cause the machine to topple over, possibly resulting in injury. CAUTION Do not place the machine on an unstable or tilted surface. If it topples over, an injury might occur. CAUTION Do not place the product or use it in an environment where it might get wet such as from snow, rain, or being near water. Doing so could result in fire or electric shock. CAUTION Do not put your face or hand near the exhaust vents. Doing so could result in burns or an accident due to hot air coming from the exhaust vents. CAUTION Do not use the product on soft material such as paper or cloth that might get sucked into the intake vents. Doing so may cause heat buildup inside the product, resulting in malfunction, burns, or fire. CAUTION Do not place the power cord and connection cable in a way that might cause someone to trip and fall. The product might fall over and cause an injury. CAUTION Do not place the product in a location where air flow is poor. Doing so may cause fire due to internal components becoming overheated.
5 CAUTION Do not place or store the product in a location where direct sunlight or heat generation might occur. The heat may deform or wear out the exterior parts or negatively affect internal parts. Doing so could result in fire. CAUTION Do not place low heat resistant material near the exhaust vents. Hot air may come from the exhaust vents, resulting in damage to the product or an ac- cident. CAUTION Do not expose the product to salt air or corrosive gas. Also, do not place the product in a laboratory or other location where a chemical reaction might oc- cur. Doing so may cause the product to malfunction. CAUTION Do not obstruct the machine’s vents. Doing so risks fire caused by overheat- ed internal components. Handling power cords and power cord plugs This section explains safety precautions about handling power cords and power cord plugs. WARNING Do not use any power sources other than those that match the specifications shown. Doing so could result in fire or electric shock. WARNING Do not use any frequencies other than those that match the specifications shown. Doing so could result in fire or electric shock. WARNING Do not damage, break, or modify the power cord. Also, do not place heavy objects on the power cord, or pull the cord or bend it severely. Doing so could result in fire or electric shock.
6 WARNING Touching the prongs of the power cable’s plug with anything metallic consti- tutes a fire and electric shock hazard. WARNING The supplied power cord is for use with this machine only. Do not use it with other appliances. Doing so could result in fire or electric shock. WARNING It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric shock. WARNING Be sure to disconnect the plug from the wall outlet at least once a year. There are burn marks on the plug. The prongs on the plug are deformed. If any of the above conditions exist, do not use the plug and consult your dealer or service representative. Use of the plug could result in fire or electric shock. WARNING Be sure to disconnect the power cord from the wall outlet at least once a year. The power cord’s inner wires are exposed, broken, etc. The power cord’s coating has a crack or dent. When bending the power cord, the power turns off and on. Part of the power cord becomes hot. The power cord is damaged. If any of the above conditions exist, do not use the power cord and consult your dealer or service representative. Use of the power cord could result in fire or electric shock.
7 WARNING Do not use the connection cable if it is deformed, cracked, or damaged. Doing so could result in fire or electric shock. If the connection cable is de- formed, cracked, or damaged, contact your service representative to request a replacement cable. WARNING When using an extension cord or power strip, only connect equipment whose total power consumption is within the power rating for the extension cord or power strip. If the power rating is exceeded, it may cause heat buildup and result in fire. WARNING Do not place the power cord and connection cable in front of the lens or ex- haust vents when the product is turned on. Doing so may result in fire. CAUTION Push the power plug all the way into the power outlet. Do not use a power outlet with a loose connection. Doing so may result in heat buildup. Plug the power cord in the correct direction into the base. If they are not plugged in correctly, it could result in smoke, fire, or electric shock. CAUTION If this machine is not going to be used for several days or longer at a time, disconnect its power cord from the wall outlet. CAUTION When disconnecting the power cord from the wall outlet, always pull the plug, not the cord. Pulling the cord can damage the power cord. Use of damaged power cords could result in fire or electric shock. CAUTION Be sure to disconnect the plug from the wall outlet and clean the prongs and the area around the prongs at least once a year. Allowing dust to build up on the plug constitutes a fire hazard.
8 CAUTION When performing maintenance on the machine, always disconnect the power cord from the wall outlet. Handling the main machine This section explains safety precautions about handling the main machine. WARNING If the machine emits smoke or odours, or if it behaves unusually, you must turn off its power immediately. After turning off the power, be sure to discon- nect the power cord plug from the wall outlet. Then contact your service rep- resentative and report the problem. Do not use the machine. Doing so could result in fire or electric shock. WARNING If metal objects, or water or other fluids fall inside this machine, you must turn off its power immediately. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service represen- tative and report the problem. Do not use the machine. Doing so could result in fire or electric shock. WARNING Do not touch this machine if a lightning strike occurs in the immediate vicinity . Doing so could result in electric shock. WARNING The following explains the warning messages on the plastic bag used in this product’s packaging. Keep the polythene materials (bags, etc.) supplied with this machine away from babies and small children at all times. Suffocation can result if polythene materials are brought into contact with the mouth or nose.
9 WARNING If the machine topples, or if a cover or other part gets broken, you must turn off its power immediately. After turning off the power, be sure to disconnect the power cord plug from the wall outlet. Then contact your service represen- tative and report the problem. Do not use the machine. Doing so could result in fire or electric shock. WARNING Contact your sales or service representative to clean or replace parts f\ or a projector that is installed on a wall or ceiling. Do not attempt to clean or replace parts for a projector that is install\ ed in a high location on a wall or ceiling. Doing so may cause it to fall down, resulting in an injury. WARNING If a projector is incorrectly installed on a wall or ceiling, it may fall down and cause an injury. Contact your sales or service representative if you want to install a projector on a wall or ceiling. Use brackets that are strong enough to support the projector. The projec- tor weighs about 18kg(40lb) (Projector weight without lens). The projector must be installed in a location that is sturdy enough to sup- port the full weight of the projector and brackets. CAUTION The machine may be very hot after it is turned off, especially the vents and the lower part of the unit where the laser is located. Avoid touching these areas. Doing so may result in burns. CAUTION Do not place the product on other equipment or vice versa. Doing so may cause heat buildup inside the product or cause the other equipment to ma\ l- function.
10 CAUTION Do not increase the volume unless you are listening while increasing the volume. Also, lower the volume before turning off the power, because a loud sound may be emitted when the power is turned on and cause hearing dam- age. Handling the machine’s interior This section explains safety precautions about handling the machine’s interior. WARNING Do not remove any covers or screws that are not mentioned in this manual. There are high voltage components inside the product that may cause elec- tric shock. Contact your service representative if any of the product’\ s internal components require maintenance, adjustment, or repair. Do not disassemble or modify the product. Doing so may cause injury or malfunction. CAUTION If the machine’s interior is not cleaned regularly, dust will accumulate. Fire and breakdown can result from heavy accumulation of dust inside this machine. Contact your sales or service representative for details about \ and charges for cleaning the machine’s interior.