Ricoh Projector PJ WU6181N User Manual

116
DATE AND TIME SETTINGS
You can set the current time, month, date, and year.
NOTE: The projector has a built-in clock. The clock will keep working for about 2 weeks after the main power is turned off. If the main power is off for 2 weeks or more, the 
built-in clock will cease. If the built-in clock ceases, set the date and time again. The built-in clock will not cease while in the standby mode.TIME ZONE SETTINGS ...................... Select your time zone.
DATE AND TIME SETTINGS .......... Set your...

117
Disabling the Cabinet Buttons [CONTROL PANEL LOCK]
This option turns on or off the CONTROL PANEL LOCK function.
NOTE:
• How to cancel the [CONTROL PANEL LOCK]
  When the [CONTROL PANEL LOCK] is set to [ON], press the EXIT button or the INPUT button on the main body for about 10 seconds to cancel the [CONTROL PANEL LOCK] 
setting.
TIP: 
•  When the [CONTROL PANEL LOCK] is turned on, a key lock icon [ 
 ] will be displayed at the bottom right of the menu.
•  This CONTROL PANEL LOCK does not affect the...

118
Setting ID to the Projector [CONTROL ID]
You can operate multiple projectors separately and independently with the single remote control that has the CONTROL ID function. 
If you assign the same ID to all the projectors, you can conveniently operate all the projectors together using the single remote 
control. To do so, you have to assign an ID number to each projector.CONTROL ID NUMBER ........... Select a number from 1 to 254 you wish to assign to your projector.
CONTROL ID...

119
Turning On or Off Remote Sensor [REMOTE SENSOR]
This option determines which remote sensor on the projector is enabled in wireless mode.
The options are: FRONT/BACK, FRONT, BACK. 
TIP:
• If the remote control system does not function when direct sunlight or strong illumination strikes the remote control sensor of the projector, change another option.
Enabling Key Sound and Error Sound [BEEP]
This feature turns on or off the button sound or alarm when an error occurs or the following operations are...

120
[NETWORK SETTINGS]
Important:
• Consult with your network administrator about these settings.
•  When using a wired LAN, connect the Ethernet cable (LAN cable) to the Ethernet port on the projector. (→ page 166) 
TIP: The network settings you make will not be affected even when [RESET] is done from the menu.
     About the Projector's [NETWORK SETTING].(→ page 6)
Hints on How to Set Up LAN Connection 
To set up the projector for a LAN connection:
Select [WIRED LAN] → [PROFILES] → [PROFILE 1] or...

121
WIRED LAN
PROFILES• The settings for using the built-in Ethernet port in the projector can 
be recorded in the projector memory in two ways.
•  Select [PROFILE 1] or [PROFILE 2] and then do settings for [DHCP] 
and the other options. 
  After doing this, select [OK] and press the ENTER button. This will 
store your settings in memory.
•  To recall the settings from memory:
  After selecting [PROFILE 1] or [PROFILE 2] from the [PROFILES] list.
  Select [OK] and press the ENTER button. 
•  Select...

122
PROJECTOR NAME
PROJECTOR NAMESet a unique projector name.  Up to 16 alphanumeric 
characters and symbols
DOMAIN
Set a host name and domain name of the projector.
HOST NAMESet a host name of the projector. Up to 15 alphanumeric 
characters
DOMAIN NAME Set a domain name of the projector. Up to 60 alphanumeric 
characters
5. Using On-Screen Menu  

123
ALERT MAIL
ALERT MAILThis option will notify your computer of lamp replace time or error 
messages via e-mail when using wireless or wired LAN. 
Placing a checkmark will turn on the Alert Mail feature.
Clearing a checkmark will turn off the Alert Mail feature.
Sample of a message to be sent from the projector:
The lamp and filters are at the end of its usable life. Please replace 
the lamp and filters.
Projector Name: rdpj
Lamp Hours Used: 100 [H]  —
HOST NAME Type in a host name. Up to 15...

124
NETWORK SERVICE
HTTP SERVERSet a password for your HTTP server. Up to 10 alphanumeric 
characters
PJLink
This option allows you to set a password when you use the PJLink feature.
NOTE: 
•   Do not forget your password. However, if you forget your password, consult with your dealer. 
•  What is PJLink?
  PJLink is a standardization of protocol used for controlling projectors of different manufac-
turers. This standard protocol is established by Japan Business Machine and Information 
System Industries...

125
[SOURCE OPTIONS]
Setting Auto Adjust [AUTO ADJUST]
This feature sets the Auto Adjust mode so that the computer signal can be automatic\
ally or manually adjusted for noise and 
stability. You can automatically make adjustment in two ways: [NORMAL] and [FINE].OFF .................................... The computer signal will not be automatically adjusted. You can manually optimize the computer signal.
NORMAL ........................ Default setting. The computer signal will be automatically adjusted....