Ricoh Mp C3000 Service Manual
Here you can view all the pages of manual Ricoh Mp C3000 Service Manual. The Ricoh manuals for All in One Printer are available online for free. You can easily download all the documents as PDF.
Page 61
![Page 61
SM 1-29 B230/B237/D042
Installation
1. Remove all tapes.
2. Open the duplex unit at the right side of the machine.
3. Remove the front right cover [A] (
x 1).
4. Remove the cover [B].
5. Remove the tray [C].
6. Remove the paper exit unit [D] (
x 1).
1. Install the 1-bin tray unit [E] (
x 1, x 1).](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-60.png "Page 61
SM 1-29 B230/B237/D042
Installation
1. Remove all tapes.
2. Open the duplex unit at the right side of the machine.
3. Remove the front right cover [A] (
x 1).
4. Remove the cover [B].
5. Remove the tray [C].
6. Remove the paper exit unit [D] (
x 1).
1. Install the 1-bin tray unit [E] (
x 1, x 1).")
SM 1-29 B230/B237/D042 Installation 1. Remove all tapes. 2. Open the duplex unit at the right side of the machine. 3. Remove the front right cover [A] ( x 1). 4. Remove the cover [B]. 5. Remove the tray [C]. 6. Remove the paper exit unit [D] ( x 1). 1. Install the 1-bin tray unit [E] ( x 1, x 1).
Page 62
![Page 62
B230/B237/D042 1-30 SM
2. Attach the tray support bar [F] to the tray [G] as shown, and then attach the
end-fence [H].
3. Install the tray [G] (with the tray support bar) in the machine.
4. Reinstall the front right cover in the machine, and then close the right door of
the machine.
5. Turn on the main power switch of the machine.
6. Check the 1-bin tray unit operation.](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-61.png "Page 62
B230/B237/D042 1-30 SM
2. Attach the tray support bar [F] to the tray [G] as shown, and then attach the
end-fence [H].
3. Install the tray [G] (with the tray support bar) in the machine.
4. Reinstall the front right cover in the machine, and then close the right door of
the machine.
5. Turn on the main power switch of the machine.
6. Check the 1-bin tray unit operation.")
B230/B237/D042 1-30 SM 2. Attach the tray support bar [F] to the tray [G] as shown, and then attach the end-fence [H]. 3. Install the tray [G] (with the tray support bar) in the machine. 4. Reinstall the front right cover in the machine, and then close the right door of the machine. 5. Turn on the main power switch of the machine. 6. Check the 1-bin tray unit operation.
Page 63
SM 1-31 B230/B237/D042 Installation 1.8 SHIFT TRAY UNIT (B791) 1.8.1 COMPONENT CHECK Check the quantity and condition of the components against the following list. No. Description Q’ty 1 Shift Tray Unit 1 2 Paper Guide - Large 1 3 Paper Guide - Small 2 4 Knob Screw 1 5 Connector Cover 1
Page 64
![Page 64
B230/B237/D042 1-32 SM
1.8.2 INSTALLATION PROCEDURE
ƒ Unplug the copier power cord before starting the following procedure.
1. Remove all tapes.
2. Remove the standard tray [A].
3. Remove the inner cover [B] (
x 1).
4. Attach the connector cover [C] to the shift tray unit [D].
5. Install the shift tray unit [D] to the machine.](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-63.png "Page 64
B230/B237/D042 1-32 SM
1.8.2 INSTALLATION PROCEDURE
ƒ Unplug the copier power cord before starting the following procedure.
1. Remove all tapes.
2. Remove the standard tray [A].
3. Remove the inner cover [B] (
x 1).
4. Attach the connector cover [C] to the shift tray unit [D].
5. Install the shift tray unit [D] to the machine.")
B230/B237/D042 1-32 SM 1.8.2 INSTALLATION PROCEDURE ƒ Unplug the copier power cord before starting the following procedure. 1. Remove all tapes. 2. Remove the standard tray [A]. 3. Remove the inner cover [B] ( x 1). 4. Attach the connector cover [C] to the shift tray unit [D]. 5. Install the shift tray unit [D] to the machine.
Page 65
![Page 65
SM 1-33 B230/B237/D042
Installation
6. Open the left side door [E] of the shift tray unit.
7. Attach the shift tray unit to the machine with the knob screw [F].
8. Install the large paper guide [G] and two small paper guides [H].
9. Turn on the main power switch of the machine.
10. Check the shift tray unit operation.](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-64.png "Page 65
SM 1-33 B230/B237/D042
Installation
6. Open the left side door [E] of the shift tray unit.
7. Attach the shift tray unit to the machine with the knob screw [F].
8. Install the large paper guide [G] and two small paper guides [H].
9. Turn on the main power switch of the machine.
10. Check the shift tray unit operation.")
SM 1-33 B230/B237/D042 Installation 6. Open the left side door [E] of the shift tray unit. 7. Attach the shift tray unit to the machine with the knob screw [F]. 8. Install the large paper guide [G] and two small paper guides [H]. 9. Turn on the main power switch of the machine. 10. Check the shift tray unit operation.
Page 66
B230/B237/D042 1-34 SM 1.9 BRIDGE UNIT (B227) 1.9.1 COMPONENT CHECK Check the quantity and condition of the components against the following list. No. Description Q’ty 1 Bridge Unit 1 2 Screw 1 3 Knob screw 1 4 Holder bracket 1 1.9.2 INSTALLATION PROCEDURE ƒ Unplug the copier power cord before starting the following procedure. ƒ 1. If you will install the 1-bin tray (B790) in the machine, install the 1-bin tray before you installing the bridge unit (B227). This will make...
Page 67
![Page 67
SM 1-35 B230/B237/D042
Installation
finisher after you install the bridge unit (B227).
1. Remove all tapes.
2. If the sensor feeler [A] is out, fold it into the machine.
3. Open the duplex unit at the right side of the machine.
4. Remove the standard tray [B].
5. Remove the front right cover [C] (
x 1).
6. Remove the connector cover [D] (
x 1).](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-66.png "Page 67
SM 1-35 B230/B237/D042
Installation
finisher after you install the bridge unit (B227).
1. Remove all tapes.
2. If the sensor feeler [A] is out, fold it into the machine.
3. Open the duplex unit at the right side of the machine.
4. Remove the standard tray [B].
5. Remove the front right cover [C] (
x 1).
6. Remove the connector cover [D] (
x 1).")
SM 1-35 B230/B237/D042 Installation finisher after you install the bridge unit (B227). 1. Remove all tapes. 2. If the sensor feeler [A] is out, fold it into the machine. 3. Open the duplex unit at the right side of the machine. 4. Remove the standard tray [B]. 5. Remove the front right cover [C] ( x 1). 6. Remove the connector cover [D] ( x 1).
Page 68
![Page 68
B230/B237/D042 1-36 SM
7. Install the bridge unit [E] in the machine.
8. Secure the bridge unit with the knob screw [F] and screw [G].
9. Reinstall the front right cover in the machine. Then close the right door of the
machine.
ƒ Open the bridge unit cover [H] when insta lling the front right cover. Otherwise,
the bridge unit cover is an obstacle for attaching the front right cover.
10. Install the optional finisher (refer to the finisher installation procedure).
ƒ If you will...](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-67.png "Page 68
B230/B237/D042 1-36 SM
7. Install the bridge unit [E] in the machine.
8. Secure the bridge unit with the knob screw [F] and screw [G].
9. Reinstall the front right cover in the machine. Then close the right door of the
machine.
ƒ Open the bridge unit cover [H] when insta lling the front right cover. Otherwise,
the bridge unit cover is an obstacle for attaching the front right cover.
10. Install the optional finisher (refer to the finisher installation procedure).
ƒ If you will...")
B230/B237/D042 1-36 SM 7. Install the bridge unit [E] in the machine. 8. Secure the bridge unit with the knob screw [F] and screw [G]. 9. Reinstall the front right cover in the machine. Then close the right door of the machine. ƒ Open the bridge unit cover [H] when insta lling the front right cover. Otherwise, the bridge unit cover is an obstacle for attaching the front right cover. 10. Install the optional finisher (refer to the finisher installation procedure). ƒ If you will...
Page 69
SM 1-37 B230/B237/D042 Installation 1.10 500-SHEET FINISHER (B792) 1.10.1 ACCESSORY CHECK Check the quantity and condition of the accessories against the following list. No. Description Q’ty 1 Output Tray 1 2 Unit Holder 1 3 Support Bracket 2 4 Support Bracket Cover 2 5 Screws 6 6 Knob Screws 4 7 Snap Rings 2 8 Bracket Cover 1 9 Paper Guide 1
Page 70
B230/B237/D042 1-38 SM 1.10.2 INSTALLATION PROCEDURE ƒ Unplug the main machine power cord before starting the following procedure. ƒ Before you install the 500-sheet finisher , the optional bridge unit (B227) must be installed Beforehand: Installing on a machine with the optional paper feed unit or LCT When you install this unit on a machine with the optional paper feed unit or LCT, you must install support brackets on the optional paper f eed unit or LCT. These support brackets can...