Ricoh Mp 6002 User Guide

Placing OriginalsPlacing Originals on the Exposure Glass
• Do not lift the ADF forcefully. Otherwise, the cover of the ADF might open or be damaged.
1. Lift the ADF.
Be sure to lift the ADF by more than 30 degrees. Otherwise, the size of the original might not be
detected correctly.
2. Place the original face down on the exposure glass. The original should be aligned to the
rear left corner.
Start with the first page to be scanned.
1. Positioning mark
3. Lower the ADF.
Placing Originals in the Auto...

1. Sensors
1. Adjust the original guide to the original size.
2. Set the aligned originals squarely face up in the ADF.
Do not stack originals beyond the limit mark.
The first page should be on the top.
1. Limit mark
2. Original guide
2. Getting Started
50CJW113
1 1
2
CJW114   

3. Copy
This chapter describes frequently used copier functions and operations. For the information not included
in this chapter, see Copy/ Document Server
 on the supplied CD-ROM.
Basic Procedure
To make copies of originals, place them on the exposure glass or in the ADF.
When placing the original on the exposure glass, start with the first page to be copied. When placing
the original in the ADF, place them so that the first page is on the top.
About placing the original on the exposure glass, see p.49...

Auto Reduce / Enlarge
The machine automatically detects the original size and then selects an appropriate reproduction ratio
based on the paper size you select.
• If you select a reproduction ratio after pressing [Auto Reduce / Enlarge], [Auto Reduce / Enlarge] is canceled and the image cannot be rotated automatically.
This is useful to copy different size originals to the same size paper. If the orientation in which your original is placed is different from that of the paper you are copying onto,
the...

1.Press [Auto Reduce / Enlarge].
2.Select the paper size.
3. Place the originals, and then press the [Start] key.
Auto Reduce / Enlarge
53  

Duplex Copying
Copies two 1-sided pages or one 2-sided page onto a 2-sided page. During copying, the image is
shifted to allow for the binding margin.
There are two types of Duplex.
1 Sided 
 2 Sided
Copies two 1-sided pages on one 2-sided page.
2 Sided 
 2 Sided
Copies one 2-sided page on one 2-sided page.
The resulting copy image will differ according to the orientation in which you place your originals (
 or
).
Original orientation and completed copies
To copy on both sides of the paper, select the...

OriginalPlacing originalsOriginal
OrientationOrientationCopyTop to TopTop to Bottom
1. Press [Dup./Combine/Series].
2.Make sure that [Duplex] is selected. If [Duplex] is not selected, press [Duplex].
3. Select [1 Sided 
 2 Sided] or [2 Sided  2 Sided] according to how you want the
document to be output.
To change the original or copy orientation, press [Orientation].
4. Press [OK].
5. Place the originals, and then press the [Start] key.
Duplex Copying
55          

Combined Copying
This mode can be used to select a reproduction ratio automatically and copy the originals onto a single
sheet of copy paper.
The machine selects a reproduction ratio between 25 and 400%. If the orientation of the original is
different from that of the copy paper, the machine will automatically rotate the image by 90 degrees to
make copies properly.
Orientation of the original and image position of Combine
The image position of Combine differs according to original orientation and the...

• Originals read from right to left
One-Sided Combine
Combine several pages onto one side of a sheet.
There are six types of One-Sided Combine.
1 Sided 2 Originals 
 Combine 1 Side
Copies two 1-sided originals to one side of a sheet.
1 Sided 4 Originals 
 Combine 1 Side
Copies four 1-sided originals to one side of a sheet.
1 Sided 8 Originals 
 Combine 1 Side
Copies eight 1-sided originals to one side of a sheet.
2 Sided 2 Pages 
 Combine 1 Side
Copies one 2-sided original to one side of a sheet....

2 Sided 4 Pages  Combine 1 Side
Copies two 2-sided originals to one side of a sheet.
2 Sided 8 Pages 
 Combine 1 Side
Copies four 2-sided originals to one side of a sheet.
1. Press [Dup./Combine/Series].
2.Press [Combine].
3. Select [1 Sided] or [2 Sided] for [Original:].
If you selected [2 Sided], you can change the orientation.
4. Press [Combine 1 Side].
5. Select the number of originals to combine.
6. Press [OK].
7. Select the paper size.
8. Place the originals, and then press the [Start] key....