Ricoh Gr 2 Manual

3
Changing Camera Settings
129
Setting the Copyright Notice
You can set a copyright notice to be written as Exif data when images are 
taken.
1 Select [Copyright Notice] in the [Setup] menu, and then press 
the $ button.
The [Copyright Notice] screen appears.
2 Press the " button.
The cursor moves to the character selection 
area.
3 Press the !"#$ buttons to select a character, and then press 
the MENU/OK button.
You can enter up to 46 alphanumeric characters. 
The	character	type	can	be	changed...

130
4
Making Use of  Images
4 Making Use of Images
Using Images on a Computer
You can transfer taken still images and recorded movies to a computer by 
connecting	 the	camera	 to	a	computer	 with	a	USB	 cable.	 You	can	also	 use	
the “Digital	 Camera	Utility	5”	software supplied with the camera to convert 
RAW images.
The following are the computer system requirements for connecting the 
camera to a computer and using the supplied software.
Windows
OS Windows 8.1 (32- and 64-bit), Windows 8 (32- and...

131
4
Making Use of  Images
Saving Images to a Computer
Use	the	supplied	USB	cable	to	connect the camera to a computer.
1 Turn off the power of the camera.
2 Open the terminal cover, and connect 
one end of the USB cable to the USB/
AV OUT terminal on the camera and 
the other end to the computer.
The camera turns on and “Connecting to 
PC…” appears on the picture display.
The camera is recognized by the computer as 
a removable disk.
The files on the memory card are displayed when a memory card is...

132
4
Making Use of  Images
Operating the Camera with a Communica-
tion Device
The images saved in the camera can be displayed on/imported to a commu-
nication device by directly connecting both the devices via Wi-Fi	and	using	
the dedicated application “Image Sync”.
Image Sync supports iOS and Android. It can be downloaded from the App 
Store	 or	Google	 Play	Store.	 For	supported	 OS	and	 other	 details,	 refer	to	the	
download site.
Enabling the Wi-Fi Function
The	 Wi-Fi	 function	 is	disabled	 when...

133
4
Making Use of  Images
 Caution ------------------------------------------------------------------------\
-------------------------------
•	 Do	not	attempt	 to	use	 the	Wi-Fi	 function	 in	a	location	 where	the	use	 of	wireless	 LAN	devices	 is	re-
stricted or prohibited, such as on airplanes.
•	 When	using	the	 Wi-Fi	function,	please	observe	local	laws	and	regulations	governing	radio	communi-
cation.
•	 If	 a	memory	 card	with	 a	built-in	 wireless	 LAN	function	 (such	as	an	 Eye-Fi	 card)	is	used,...

134
4
Making Use of  Images
Pressing and Holding the w Button
1 Set [Effect Button Hold Setting] to [Wi-Fi] in the [Key Custom 
Options] menu.
The	default	setting	is	[Wi-Fi].
2 Press and hold the w button.
A	beep	 sounds	 and	the	Wi-Fi	 symbol	 appears	
on the shooting screen. 
3 Release the w  button.
To	disable	the	Wi-Fi	function,	press	and	hold	the	w  button again.
Touching a Communication Device
When this camera comes into contact with a communication device 
equipped	with	the	NFC	 function,	 the...

135
4
Making Use of  Images
Pressing and Holding the 6 Button
The	Wi-Fi	 function	 can	be	enabled	 in	playback	 mode	from	the	power-off	
state of the camera.
1 Press and hold the 6 button until a beep sounds.
The	 camera	 is	turned	 on	in	playback	 mode	and	the	Wi-Fi	 function	 is	enabled.
 Caution ------------------------------------------------------------------------\
-------------------------------
•	 When	 the	Wi-Fi	 function	 is	enabled	 using	the	6 button, the camera is not switched to shooting...

136
4
Making Use of  Images
Operating the Camera with a Communication Device
Connecting the Camera and Communication Device
Connect	the	camera	 and	communication	 device	via	Wi-Fi,	 and	start	 Image	
Sync installed on the communication device.
See	 “Enabling	 the	Wi-Fi	 Function” 	(p.132)	 to	enable	 the	Wi-Fi	 function	 of	the	
camera.
When an NFC-compatible Device is Used
1 Set the wireless LAN (Wi-Fi) function and the NFC reader/writer 
function to ON on the communication device.
2 Lightly touch the...

137
4
Making Use of  Images
3 Tap [RICOH_xxxxxx] in the [Network 
List].
The [Enter Password] screen appears.
4 Enter the password, and tap 
[Connect].
A	Wi-Fi	 connection	 is	established	 between	
the camera and communication device.
The list of images appears on the Image Sync 
screen.
 Note  ------------------------------------------------------------------------\
-----------------------------------
•	 You	can	check	the	default	password	in	[Wi-Fi	Information]	of	the	[Setup]	menu.	(p.133) 

138
4
Making Use of  Images
When an iOS Device is Used
1 Set the wireless LAN (Wi-Fi) function to ON on the 
communication device.
Tap	[RICOH_xxxxxx]	in	the	list	of	detected	Wi-Fi	networks.
2 Enter the password, and tap [Join].
A	Wi-Fi	 connection	 is	established	 between	
the camera and communication device.
3 Start Image Sync on the communication device.
The list of images appears on the Image Sync screen.