Ricoh Gr 2 Manual
Here you can view all the pages of manual Ricoh Gr 2 Manual. The Ricoh manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 111
![Page 111
2
Playback Functions
109
Note ------------------------------------------------------------------------\
-----------------------------------
• [Multi-P AUTO] or [Manual] of [White Balance] can only be selected if it was set at the time of shoot-
ing.
• For [Dynamic Range Compensation] and [Noise Reduction], select from [Off ], [Weak], [Medium], and
[Strong].
• For [Aspect Ratio], the images taken when [Picture Format] is set to [3:2] can be selected.
• For RAW images taken using [Shift...](http://img.usermanuals.tech/thumb/64/100711/w300_gr-2-manual-1509561781_d-110.png "Page 111
2
Playback Functions
109
Note ------------------------------------------------------------------------\
-----------------------------------
• [Multi-P AUTO] or [Manual] of [White Balance] can only be selected if it was set at the time of shoot-
ing.
• For [Dynamic Range Compensation] and [Noise Reduction], select from [Off ], [Weak], [Medium], and
[Strong].
• For [Aspect Ratio], the images taken when [Picture Format] is set to [3:2] can be selected.
• For RAW images taken using [Shift...")
2 Playback Functions 109 Note ------------------------------------------------------------------------\ ----------------------------------- • [Multi-P AUTO] or [Manual] of [White Balance] can only be selected if it was set at the time of shoot- ing. • For [Dynamic Range Compensation] and [Noise Reduction], select from [Off ], [Weak], [Medium], and [Strong]. • For [Aspect Ratio], the images taken when [Picture Format] is set to [3:2] can be selected. • For RAW images taken using [Shift...
Page 112
2 Playback Functions 110 Viewing Images with an AV Device You can connect the camera to a TV or other AV device to play back images on the device. Purchase an optional cable that is compatible with the video input terminal(s) of the device to be connected. AV device terminalCableCamera terminal Video terminal AV cable (AV-1) USB/AV OUT terminal HDMI terminal HDMI cable (HC-1) HDMI micro output terminal 1 Connect the cable to the video input terminal of the AV device. 2 Make sure that the camera power...
Page 113
![Page 113
2
Playback Functions
111
Note ------------------------------------------------------------------------\
-----------------------------------
• When connecting with an AV cable, confirm the video format of the AV device. The default video
format setting of the camera varies depending on the country or region where you purchased it. To
change the video format setting, set in [ Video Out Mode] of the [Setup] menu.
• The view switches to single image view when an HDMI cable is connected or...](http://img.usermanuals.tech/thumb/64/100711/w300_gr-2-manual-1509561781_d-112.png "Page 113
2
Playback Functions
111
Note ------------------------------------------------------------------------\
-----------------------------------
• When connecting with an AV cable, confirm the video format of the AV device. The default video
format setting of the camera varies depending on the country or region where you purchased it. To
change the video format setting, set in [ Video Out Mode] of the [Setup] menu.
• The view switches to single image view when an HDMI cable is connected or...")
2 Playback Functions 111 Note ------------------------------------------------------------------------\ ----------------------------------- • When connecting with an AV cable, confirm the video format of the AV device. The default video format setting of the camera varies depending on the country or region where you purchased it. To change the video format setting, set in [ Video Out Mode] of the [Setup] menu. • The view switches to single image view when an HDMI cable is connected or...
Page 114
![Page 114
2
Playback Functions
112
Setting DPOF
You can order prints of the still images stored on the memory card at a store
with a print service.
1 Display the image to set in playback mode, and then press the
MENU/OK button.
The [Playback] menu appears.
2 Select [DPOF], and then press the $ button.
3 Use the !" buttons to select [1 File] or [Select All].
If [1 File] is selected, use the #$ buttons to select an image.
Selecting [Cancel All] cancels the DPOF setting for all images.
4 Press the MENU/OK...](http://img.usermanuals.tech/thumb/64/100711/w300_gr-2-manual-1509561781_d-113.png "Page 114
2
Playback Functions
112
Setting DPOF
You can order prints of the still images stored on the memory card at a store
with a print service.
1 Display the image to set in playback mode, and then press the
MENU/OK button.
The [Playback] menu appears.
2 Select [DPOF], and then press the $ button.
3 Use the !\" buttons to select [1 File] or [Select All].
If [1 File] is selected, use the #$ buttons to select an image.
Selecting [Cancel All] cancels the DPOF setting for all images.
4 Press the MENU/OK...")
2 Playback Functions 112 Setting DPOF You can order prints of the still images stored on the memory card at a store with a print service. 1 Display the image to set in playback mode, and then press the MENU/OK button. The [Playback] menu appears. 2 Select [DPOF], and then press the $ button. 3 Use the !" buttons to select [1 File] or [Select All]. If [1 File] is selected, use the #$ buttons to select an image. Selecting [Cancel All] cancels the DPOF setting for all images. 4 Press the MENU/OK...
Page 115
![Page 115
2
Playback Functions
113
Setting DPOF for Multiple Still Images
You can specify multiple images and the number of copies from thumbnail
view.
1 Press the Y button in playback mode.
The screen changes to 20-image view.
2 Select [DPOF] in the [Playback] menu, and then press the $
button.
3 Press the #$ buttons to select an
image to print, and then use the !"
buttons to specify the number of
copies.
The symbol indicating the DPOF setting ap-
pears.
To cancel the setting, specify [0] for the...](http://img.usermanuals.tech/thumb/64/100711/w300_gr-2-manual-1509561781_d-114.png "Page 115
2
Playback Functions
113
Setting DPOF for Multiple Still Images
You can specify multiple images and the number of copies from thumbnail
view.
1 Press the Y button in playback mode.
The screen changes to 20-image view.
2 Select [DPOF] in the [Playback] menu, and then press the $
button.
3 Press the #$ buttons to select an
image to print, and then use the !\"
buttons to specify the number of
copies.
The symbol indicating the DPOF setting ap-
pears.
To cancel the setting, specify [0] for the...")
2 Playback Functions 113 Setting DPOF for Multiple Still Images You can specify multiple images and the number of copies from thumbnail view. 1 Press the Y button in playback mode. The screen changes to 20-image view. 2 Select [DPOF] in the [Playback] menu, and then press the $ button. 3 Press the #$ buttons to select an image to print, and then use the !" buttons to specify the number of copies. The symbol indicating the DPOF setting ap- pears. To cancel the setting, specify [0] for the...
Page 116
3 Changing Camera Settings 114 3 Changing Camera Settings Customizing the Camera You can change the functions of the Fn buttons and ADJ. lever, and register settings to MY1, MY2, and MY3 of the mode dial. Registering Shooting Settings (My Settings) You can register the current camera settings as “My Settings” so that you can easily recall the desired settings for shooting. Settings can be registered to the following. MY 1, MY 2, MY 3 Settings can be registered to MY1, MY2, and MY3 of the mode...
Page 117
![Page 117
3
Changing Camera Settings
115
1 Set the functions to register.
2 Select [Reg. My Settings] in the [Key Custom Options] menu,
and then press the $ button.
The [Reg. My Settings] screen appears.
3 Select the location to register the
settings, and then press the MENU/
OK button.
If you select [MY 1], [MY 2], or [MY 3], the set-
tings are registered to the mode dial.
To save the settings to My Settings Box, select
[My Settings Box ] and press the $ button to
select the number to which to register the...](http://img.usermanuals.tech/thumb/64/100711/w300_gr-2-manual-1509561781_d-116.png "Page 117
3
Changing Camera Settings
115
1 Set the functions to register.
2 Select [Reg. My Settings] in the [Key Custom Options] menu,
and then press the $ button.
The [Reg. My Settings] screen appears.
3 Select the location to register the
settings, and then press the MENU/
OK button.
If you select [MY 1], [MY 2], or [MY 3], the set-
tings are registered to the mode dial.
To save the settings to My Settings Box, select
[My Settings Box ] and press the $ button to
select the number to which to register the...")
3 Changing Camera Settings 115 1 Set the functions to register. 2 Select [Reg. My Settings] in the [Key Custom Options] menu, and then press the $ button. The [Reg. My Settings] screen appears. 3 Select the location to register the settings, and then press the MENU/ OK button. If you select [MY 1], [MY 2], or [MY 3], the set- tings are registered to the mode dial. To save the settings to My Settings Box, select [My Settings Box ] and press the $ button to select the number to which to register the...
Page 118
![Page 118
3
Changing Camera Settings
116
Recalling Settings Registered as My Settings
You can assign the settings registered to [My Settings Box] to MY1, MY2, and
MY3 of the mode dial.
1 Select [Recall My Settings] in the [Key Custom Options] menu,
and then press the $ button.
The [Recall My Settings] screen appears.
2 Press the !" buttons to select the
location on the dial to assign the
settings, and then press the $
button.
3 Select the My Settings Box number
with the “My Settings” registered,
and...](http://img.usermanuals.tech/thumb/64/100711/w300_gr-2-manual-1509561781_d-117.png "Page 118
3
Changing Camera Settings
116
Recalling Settings Registered as My Settings
You can assign the settings registered to [My Settings Box] to MY1, MY2, and
MY3 of the mode dial.
1 Select [Recall My Settings] in the [Key Custom Options] menu,
and then press the $ button.
The [Recall My Settings] screen appears.
2 Press the !\" buttons to select the
location on the dial to assign the
settings, and then press the $
button.
3 Select the My Settings Box number
with the “My Settings” registered,
and...")
3 Changing Camera Settings 116 Recalling Settings Registered as My Settings You can assign the settings registered to [My Settings Box] to MY1, MY2, and MY3 of the mode dial. 1 Select [Recall My Settings] in the [Key Custom Options] menu, and then press the $ button. The [Recall My Settings] screen appears. 2 Press the !" buttons to select the location on the dial to assign the settings, and then press the $ button. 3 Select the My Settings Box number with the “My Settings” registered, and...
Page 119
![Page 119
3
Changing Camera Settings
117
Shooting Images in My Settings Mode
1 Turn the mode dial to MY1, MY2, or
MY3.
Shooting becomes possible with the settings
of “My Settings”.
2 To temporarily change the shooting
mode, select [Switch Shooting
Mode] in the [Shooting] menu.
Note ------------------------------------------------------------------------\
-----------------------------------
• The settings changed in My Settings mode are restored to the settings registered originally for the
MY1,...](http://img.usermanuals.tech/thumb/64/100711/w300_gr-2-manual-1509561781_d-118.png "Page 119
3
Changing Camera Settings
117
Shooting Images in My Settings Mode
1 Turn the mode dial to MY1, MY2, or
MY3.
Shooting becomes possible with the settings
of “My Settings”.
2 To temporarily change the shooting
mode, select [Switch Shooting
Mode] in the [Shooting] menu.
Note ------------------------------------------------------------------------\
-----------------------------------
• The settings changed in My Settings mode are restored to the settings registered originally for the
MY1,...")
3 Changing Camera Settings 117 Shooting Images in My Settings Mode 1 Turn the mode dial to MY1, MY2, or MY3. Shooting becomes possible with the settings of “My Settings”. 2 To temporarily change the shooting mode, select [Switch Shooting Mode] in the [Shooting] menu. Note ------------------------------------------------------------------------\ ----------------------------------- • The settings changed in My Settings mode are restored to the settings registered originally for the MY1,...
Page 120
![Page 120
3
Changing Camera Settings
118
Editing “My Settings”
You can edit the settings registered as “My Settings”.
1 Select [Edit My Settings] in the [Key Custom Options] menu, and
then press the $ button.
The [Edit My Settings] screen appears.
2 Select the “My Settings” item you
want to edit, and then press the $
button.
To edit a “My Settings” item saved to My Set -
tings Box, select [My Settings Box] and press
the $ button to select a number.
A list of settings appears.
3 Press the !" buttons to...](http://img.usermanuals.tech/thumb/64/100711/w300_gr-2-manual-1509561781_d-119.png "Page 120
3
Changing Camera Settings
118
Editing “My Settings”
You can edit the settings registered as “My Settings”.
1 Select [Edit My Settings] in the [Key Custom Options] menu, and
then press the $ button.
The [Edit My Settings] screen appears.
2 Select the “My Settings” item you
want to edit, and then press the $
button.
To edit a “My Settings” item saved to My Set -
tings Box, select [My Settings Box] and press
the $ button to select a number.
A list of settings appears.
3 Press the !\" buttons to...")
3 Changing Camera Settings 118 Editing “My Settings” You can edit the settings registered as “My Settings”. 1 Select [Edit My Settings] in the [Key Custom Options] menu, and then press the $ button. The [Edit My Settings] screen appears. 2 Select the “My Settings” item you want to edit, and then press the $ button. To edit a “My Settings” item saved to My Set - tings Box, select [My Settings Box] and press the $ button to select a number. A list of settings appears. 3 Press the !" buttons to...