Ricoh Caplio R30 User Guide

39
Quick Guide
1.Switch the Mode Selector to 5.
2.Press the ! button.
The still image mode selection screen 
appears.
3.Press the ! buttons to select a 
mode.
4.Press the M/O button.
The Mode’s symbol is displayed on the 
upper part of the LCD monitor.
5.Press the shutter release button.
Changing Scene Mode
Press the ! button to return to the still image mode selection screen.
Returning to Ordinary Shooting Mode
1.Press the ! button to return to the still image mode 
selection screen.
2.Press the !...

40
Using the skew correction function
1.Turn the Mode Selector to 5.
2.Press the ! button.
The still image mode selection screen appears.
3.Press the ! buttons to select [SKEW COR MODE].
4.Press the M/O button.
5.Press the shutter release button to shoot the subject.
Immediately after shooting, the area recognized as a correction range is 
displayed with an orange frame. 
Up to five areas can be recognized.
To select another correction area, move the orange frame to the required 
area by pressing the $...

41
Quick Guide
Playing Back
Checking the image you just took 
(Quick Review)
You can view the image you just took on the LCD monitor. 
If you are not pleased with the way the photo came out, 
you can erase it then and there.
1.While still in the Still Image Mode, 
press the Q (Quick Review) button.
The last image you took is displayed on the 
LCD monitor.
Note
• Once the power is turned off, the image you took cannot be displayed in the still image 
mode even if you press the Q button.
• If you use Quick...

42
Viewing Your Images
In the Playback Mode you can check still images you 
have taken. You can also delete or zoom in on them.
1.Press the 6 (Playback) button.
The camera switches to Playback mode 
and the last still image you took is 
displayed.
You can view your pictures in order by 
using the #$ button.
To switch the camera from playback mode 
to still image mode (or movie or voice 
memo mode), press the Playback button again.
Note
About power-on in playback mode
When the camera power is off,...

43
Quick Guide
Playing back in the three-frame view
A playback view can be divided into three frames. The 
three-frame view allows you to select a still image to 
enlarge or delete it.
1.Press the 6 (Playback) button.
The last image you took is displayed.
2.Press the 9 (Thumbnail Display) 
button.
The screen changes to the three-frame 
view. The large frame at the center 
displays the still image now selected.
To switch to single-picture display:
1.Press the #$ buttons to select a still image.
2.Press...

44
About Screen Switching at Playback
The playback screen changes as follows:
Note
If one of the following operations is performed on the three-frame view, the display returns to 
the ordinary playback screen (single-picture display) and the operation is executed.
• Deletion (P.49)
• Menu display (P.99)
• Movie playback (P.96)
• Sound playback (P.98)
Reference
For how to erase unwanted Images, see P.49.
Downloaded From camera-usermanual.com Ricoh Manuals 

45
Quick Guide
Thumbnail Display
You can view your images in sets of 12.
You can then select an image to erase or magnify.
1.Press the 6 (Playback) button.
The last image you took is displayed.
2.Press the 9 (Thumbnail Display) 
button.
The screen changes to three-frame 
view.
3.Press the 9 (Thumbnail Display) 
button.
The screen is divided into 12 frames and 
displays 12 still images at once.
To display just one photo
1.Use the !#$ buttons to select an image.
2.Press the 8 (Enlarged View) button twice....

46
Magnifying Images
You can enlarge a still image displayed on the LCD 
Monitor.
1.Press the 6 (Playback) button.
The last image you took is displayed.
2.Press the #$ buttons to display the still image you want to 
enlarge.
3.Press the 8 (Enlarged View) 
button.
The still image is enlarged.
Note
Enlarged view is also available in the Quick Review mode.
2592 × 1944, 2592 × 1728, 2048 × 1536 8 times
1280 × 960 6.7 times
640 × 480 3.4 times
In Enlarged View
8 Button Enlarges the displayed still image. You...

47
Quick Guide
Viewing on a Television
You can view still images you have taken on a TV screen. The 
camera displays everything on the TV screen just as it would on the 
LCD Monitor.
To use your television for viewing, connect your camera to the 
television with the AV cable that came with your camera.
To view still images on a television, follow the steps below.
1.Securely connect the AV cable to 
the Video In terminal on the 
television.
Connect the white plug of the AV cable 
to the audio input...

48
5.Press the Power button or keep 
pressing the Playback button for 
more than one second to turn the 
camera on.
Caution
Connecting the AV cable to the camera turns off the LCD monitor display and the speaker 
output. 
Note
• If you connect the AV cable to your video recorder’s In terminal, you can record what you 
have shot onto video.
• Your camera is set to NTSC playback format (used in Japan and other countries) for use 
with television equipment, etc. If the equipment you want to connect to uses...