Ricoh B230 Service Manual
Here you can view all the pages of manual Ricoh B230 Service Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 1201
![Page 1201
Folder
SM 21 B793
B793
Booklet
Finisher
13. Remove the guide plate [13].
14. Remove the staple folding unit [15] (3 screws, 2 connectors).](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1200.png "Page 1201
Folder
SM 21 B793
B793
Booklet
Finisher
13. Remove the guide plate [13].
14. Remove the staple folding unit [15] (3 screws, 2 connectors).")
Folder SM 21 B793 B793 Booklet Finisher 13. Remove the guide plate [13]. 14. Remove the staple folding unit [15] (3 screws, 2 connectors).
Page 1202
![Page 1202
B793 22 SM
15. Remove the staple cartridge [16].
16. Remove the stapler unit cover [17].
17. Remove the stapler drive unit [18].](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1201.png "Page 1202
B793 22 SM
15. Remove the staple cartridge [16].
16. Remove the stapler unit cover [17].
17. Remove the stapler drive unit [18].")
B793 22 SM 15. Remove the staple cartridge [16]. 16. Remove the stapler unit cover [17]. 17. Remove the stapler drive unit [18].
Page 1203
![Page 1203
Folder
SM 23 B793
B793
Booklet
Finisher
Reassembly
1. Mount the stapler drive unit [1].
2. Mount the staple folder unit [2]. Do not tighten the screws [3] at this time.](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1202.png "Page 1203
Folder
SM 23 B793
B793
Booklet
Finisher
Reassembly
1. Mount the stapler drive unit [1].
2. Mount the staple folder unit [2]. Do not tighten the screws [3] at this time.")
Folder SM 23 B793 B793 Booklet Finisher Reassembly 1. Mount the stapler drive unit [1]. 2. Mount the staple folder unit [2]. Do not tighten the screws [3] at this time.
Page 1204
![Page 1204
B793 24 SM
3. Set the special tool in the long hole [4] on both units.
4. Secure the special tool [5] with the knob [6].](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1203.png "Page 1204
B793 24 SM
3. Set the special tool in the long hole [4] on both units.
4. Secure the special tool [5] with the knob [6].")
B793 24 SM 3. Set the special tool in the long hole [4] on both units. 4. Secure the special tool [5] with the knob [6].
Page 1205
![Page 1205
Folder
SM 25 B793
B793
Booklet
Finisher
5. Tighten the screws [7] for the stapler folder unit.
6. Reassemble the machine.](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1204.png "Page 1205
Folder
SM 25 B793
B793
Booklet
Finisher
5. Tighten the screws [7] for the stapler folder unit.
6. Reassemble the machine.")
Folder SM 25 B793 B793 Booklet Finisher 5. Tighten the screws [7] for the stapler folder unit. 6. Reassemble the machine.
Page 1206
![Page 1206
B793 26 SM
1.4 OTHERS
1.4.1 MAIN BOARD
1. Remove the rear cover.
2. Remove the main board [A] (
x 5).](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1205.png "Page 1206
B793 26 SM
1.4 OTHERS
1.4.1 MAIN BOARD
1. Remove the rear cover.
2. Remove the main board [A] (
x 5).")
B793 26 SM 1.4 OTHERS 1.4.1 MAIN BOARD 1. Remove the rear cover. 2. Remove the main board [A] ( x 5).
Page 1207
DIP Switches SM 27 B793 B793 Booklet Finisher 1.5 DIP SWITCHES SW100: Adjust the staple position for booklet mode No. Function 1 ON: 0.3 mm 2 ON: 0.6 mm 3 ON: 1.2 mm 4 Direction OFF: Towards the trailing edge, ON: Towards the leading edge SW101: Adjust the fold position No. Function 1 ON: 0.2 mm 2 ON: 0.4 mm 3 ON: 0.8 mm 4 Direction OFF: Towards the trailing edge, ON: Towards the leading edge SW102: Move the tray position No. Function 1 OFF → ON → OFF Turn the switch...
Page 1208
B793 28 SM
2. DETAILED SECTION DESCRIPTIONS
2.1 COMPONENT LAYOUT
2.1.1 MECHANICAL COMPONENT LAYOUT
1. Proof Tray 2. Shift Tray 3. Exit Guide Plate
4. Stack Feed Out Belt 5. Staple Unit 6. Booklet Tray
7. Proof Tray Exit Roller 8. Proof Tray Junction Gate 9. Punch Unit
10. Staple Tray Junction
Gate 11. Positioning Roller 12. 1st Clamp Roller
13. 2nd Clamp Roller 14. Folder Plate 15. Folder Roller
Page 1209
Component Layout SM 29 B793 B793 Booklet Finisher Drive Layout 1. Upper Transport Motor 2. Entrance Motor 3. Lower Transport Motor 4. Fold Plate Motor 5. Fold Roller Motor 6. Stack Feed-out Motor
Page 1210
B793 30 SM 2.1.2 ELECTRICAL COMPONENT LAYOUT 1. Proof Tray Exit Sensor 2. Exit Guide Plate Motor 3. Shift Tray Exit Sensor 4. Upper Limit Switch 5. Shift Tray Position Sensor 6. Rear Booklet Tray Full Sensor 7. Front Booklet Tray Full Sensor 8. Proof Tray Full Sensor 9. Exit Guide Plate HP Sensor 10. Entrance Sensor 11. Front Door Safety Switch 12. Staple Tray Exit Sensor