Ricoh B230 Service Manual
Here you can view all the pages of manual Ricoh B230 Service Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 1191
![Page 1191
Main Body
SM 11 B793
B793
Booklet
Finisher
1.2.11 SHIFT MOTOR
1. Remove the rear cover.
2. Remove the shift motor with bracket [A] (
x 1, x 4)
3. Remove the shift motor [B] (
x 1).](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1190.png "Page 1191
Main Body
SM 11 B793
B793
Booklet
Finisher
1.2.11 SHIFT MOTOR
1. Remove the rear cover.
2. Remove the shift motor with bracket [A] (
x 1, x 4)
3. Remove the shift motor [B] (
x 1).")
Main Body SM 11 B793 B793 Booklet Finisher 1.2.11 SHIFT MOTOR 1. Remove the rear cover. 2. Remove the shift motor with bracket [A] ( x 1, x 4) 3. Remove the shift motor [B] ( x 1).
Page 1192
![Page 1192
B793 12 SM
1.3 FOLDER
1.3.1 STAPLE FOLDER UNIT
1. Remove the rear cover.
2. Disconnect all connectors and release the harness [A] for the staple folder unit
(
x 1, x 3).
3. Open the front cover.](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1191.png "Page 1192
B793 12 SM
1.3 FOLDER
1.3.1 STAPLE FOLDER UNIT
1. Remove the rear cover.
2. Disconnect all connectors and release the harness [A] for the staple folder unit
(
x 1, x 3).
3. Open the front cover.")
B793 12 SM 1.3 FOLDER 1.3.1 STAPLE FOLDER UNIT 1. Remove the rear cover. 2. Disconnect all connectors and release the harness [A] for the staple folder unit ( x 1, x 3). 3. Open the front cover.
Page 1193
![Page 1193
Folder
SM 13 B793
B793
Booklet
Finisher
4. Pull out and remove the staple folder unit [B] ( x 2).
1.3.2 FOLDER UNIT
1. Remove the staple folder unit.
2. Remove the knobs [A] (
x 1 each).
3. Disconnect the connectors.
4. Remove the folder unit [B] (
x 4).](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1192.png "Page 1193
Folder
SM 13 B793
B793
Booklet
Finisher
4. Pull out and remove the staple folder unit [B] ( x 2).
1.3.2 FOLDER UNIT
1. Remove the staple folder unit.
2. Remove the knobs [A] (
x 1 each).
3. Disconnect the connectors.
4. Remove the folder unit [B] (
x 4).")
Folder SM 13 B793 B793 Booklet Finisher 4. Pull out and remove the staple folder unit [B] ( x 2). 1.3.2 FOLDER UNIT 1. Remove the staple folder unit. 2. Remove the knobs [A] ( x 1 each). 3. Disconnect the connectors. 4. Remove the folder unit [B] ( x 4).
Page 1194
![Page 1194
B793 14 SM
1.3.3 FOLDER UNIT EXIT SENSOR
1. Remove the folder unit.
2. Remove the folder unit upper cover [A] (
x 1).
3. Remove the lower clamp roller unit [B] (
x 4).
4. Remove the folder unit exit sensor [C] (
x 1, x 1).](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1193.png "Page 1194
B793 14 SM
1.3.3 FOLDER UNIT EXIT SENSOR
1. Remove the folder unit.
2. Remove the folder unit upper cover [A] (
x 1).
3. Remove the lower clamp roller unit [B] (
x 4).
4. Remove the folder unit exit sensor [C] (
x 1, x 1).")
B793 14 SM 1.3.3 FOLDER UNIT EXIT SENSOR 1. Remove the folder unit. 2. Remove the folder unit upper cover [A] ( x 1). 3. Remove the lower clamp roller unit [B] ( x 4). 4. Remove the folder unit exit sensor [C] ( x 1, x 1).
Page 1195
![Page 1195
Folder
SM 15 B793
B793
Booklet
Finisher
1.3.4 FOLDER UNIT ENTRANCE SENSOR
1. Open the front cover.
2. Pull out the staple folder unit.
3. Remove the exit cover [A] (
x 2).
4. Remove the entrance sensor [B] (
x 1, x 1).
1.3.5 STAPLER UNIT
1. Remove the rear cover.
2. Disconnect the connector [1] and release the harness (
x 2 [2]).
3. Remove two screws [3].](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1194.png "Page 1195
Folder
SM 15 B793
B793
Booklet
Finisher
1.3.4 FOLDER UNIT ENTRANCE SENSOR
1. Open the front cover.
2. Pull out the staple folder unit.
3. Remove the exit cover [A] (
x 2).
4. Remove the entrance sensor [B] (
x 1, x 1).
1.3.5 STAPLER UNIT
1. Remove the rear cover.
2. Disconnect the connector [1] and release the harness (
x 2 [2]).
3. Remove two screws [3].")
Folder SM 15 B793 B793 Booklet Finisher 1.3.4 FOLDER UNIT ENTRANCE SENSOR 1. Open the front cover. 2. Pull out the staple folder unit. 3. Remove the exit cover [A] ( x 2). 4. Remove the entrance sensor [B] ( x 1, x 1). 1.3.5 STAPLER UNIT 1. Remove the rear cover. 2. Disconnect the connector [1] and release the harness ( x 2 [2]). 3. Remove two screws [3].
Page 1196
![Page 1196
B793 16 SM
4. Open the front cover and pull out the staple folder unit [4].
5. Disconnect the connectors and release the harness. (4 connectors [5], 1 clamp
[6])](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1195.png "Page 1196
B793 16 SM
4. Open the front cover and pull out the staple folder unit [4].
5. Disconnect the connectors and release the harness. (4 connectors [5], 1 clamp
[6])")
B793 16 SM 4. Open the front cover and pull out the staple folder unit [4]. 5. Disconnect the connectors and release the harness. (4 connectors [5], 1 clamp [6])
Page 1197
![Page 1197
Folder
SM 17 B793
B793
Booklet
Finisher
6. Remove a connector [7].
7. Remove 2 screws [8].](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1196.png "Page 1197
Folder
SM 17 B793
B793
Booklet
Finisher
6. Remove a connector [7].
7. Remove 2 screws [8].")
Folder SM 17 B793 B793 Booklet Finisher 6. Remove a connector [7]. 7. Remove 2 screws [8].
Page 1198
![Page 1198
B793 18 SM
8. Remove the staple tray [9].
9. Remove the guide [10]. (2 screws)](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1197.png "Page 1198
B793 18 SM
8. Remove the staple tray [9].
9. Remove the guide [10]. (2 screws)")
B793 18 SM 8. Remove the staple tray [9]. 9. Remove the guide [10]. (2 screws)
Page 1199
![Page 1199
Folder
SM 19 B793
B793
Booklet
Finisher
10. Move the stapler unit until its screw come to the hole [11] on the stay.
11. Remove the screw [12] that holds the front of the guide plate [13].](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1198.png "Page 1199
Folder
SM 19 B793
B793
Booklet
Finisher
10. Move the stapler unit until its screw come to the hole [11] on the stay.
11. Remove the screw [12] that holds the front of the guide plate [13].")
Folder SM 19 B793 B793 Booklet Finisher 10. Move the stapler unit until its screw come to the hole [11] on the stay. 11. Remove the screw [12] that holds the front of the guide plate [13].
Page 1200
![Page 1200
B793 20 SM
12. Remove the screw [14] that holds the rear of the guide plate.
ƒ Remove the rear side screw through the hole in the stay.](http://img.usermanuals.tech/thumb/64/100811/w300_b230-service-manual-1509630901_d-1199.png "Page 1200
B793 20 SM
12. Remove the screw [14] that holds the rear of the guide plate.
ƒ Remove the rear side screw through the hole in the stay.")
B793 20 SM 12. Remove the screw [14] that holds the rear of the guide plate. ƒ Remove the rear side screw through the hole in the stay.