Ricoh Aficio MP2000SP User Manual

Authentication Information (MFP)
143
7 Authentication Information (MFP)
Following describes the procedure for authenticating a user code.
Important
❒The functions associated with each user code are the same. If you change or
delete user codes, management data and limits associated with that code be-
come invalid.
Register user codes to limit users to the following functions and check their use
of each function:
Copier
Facsimile
Scanner
Printer
Note
❒The number of copies scanned using the scanner function...

Registering Addresses and Users for Facsimile/Scanner Functions
144
7
CSelect [Address Book Management] using {U} or {T}, and then press the {OK}
key.
DSelect [Program/Change] using {U} or {T}, and then press the {OK} key.
EEnter the registration number you want to change using the number keys
or the Quick Dial keys, and then press the {OK} key.
You can automatically specify registration numbers 001-032 by pressing the
Quick Dial keys.
Press [Search] to search by name, destination list, registration...

Authentication Information (MFP)
145
7
HSelect [Auth. Info] using {U} or {T}, and then press the {OK} key.
ISelect [User Code] using {U} or {T}, and then press the {OK} key.
JEnter the user code using the number keys, and then press the {OK} key.
If you have entered a wrong code, press the {Clear/Stop} key and then enter
the correct code again.
You can use up to eight digits for specifying the user code.
KSelect [Permit Functions on Auth.] using {U} or {T}, and then press the {OK}
key.
LSelect the...

Registering Addresses and Users for Facsimile/Scanner Functions
146
7
NPress [End].
OPress the {OK} key.
PPress the {User Tools/Counter} key.
Note
❒You can enter a one-to eight-digit user code.
❒For registration of a name, see Registering Names.
Reference
p.138 “Registering Names”
Changing a User Code
This section describes how to change a user code.
Important
❒Even if you change a user code, the counter value will not be cleared.
ASelect [System Settings] using {U} or {T}, and then press the {OK} key....

Authentication Information (MFP)
147
7
DSelect [Program/Change] using {U} or {T}, and then press the {OK} key.
EEnter the registration number you want to change using the number keys
or the Quick Dial keys, and then press the {OK} key.
You can automatically specify registration numbers 001-032 by pressing the
Quick Dial keys.
Press [Search] to search by name, destination list, registration number, user
code, fax number, or folder destination.
FPress the {OK} key.
GPress [Details].
HSelect [Auth. Info]...

Registering Addresses and Users for Facsimile/Scanner Functions
148
7
JEnter the new user code using the number keys, and then press the {OK}
key.
KSelect [Permit Functions on Auth.] using {U} or {T}, and then press the {OK}
key.
LSelect the function you want to change the user code for using {V}, and
then press the {OK} key.
MPress the {Escape} key.
NPress [End].
OPress the {OK} key.
PPress the {User Tools/Counter} key.
Note
❒To change the name, see Changing a Name.
Reference
p.140 “Changing a...

Authentication Information (MFP)
149
7
Deleting a User Code
This section describes how to delete a user code.
Important
❒After clearing the user code, the counter is automatically cleared.
ASelect [System Settings] using {U} or {T}, and then press the {OK} key.
BSelect [Administrator Tools] using {U} or {T}, and then press the {OK} key.
CSelect [Address Book Management] using {U} or {T}, and then press the {OK} key.
DSelect [Program/Change] using {U} or {T}, and then press the {OK} key.
EEnter the...

Registering Addresses and Users for Facsimile/Scanner Functions
150
7
FPress the {OK} key.
GPress [Details].
HSelect [Auth. Info] using {U} or {T}, and then press the {OK} key.
ISelect [User Code] using {U} or {T}, and then press the {OK} key.
JPress the {Clear/Stop} to delete the user code, and then press the {OK} key.
KPress the {Escape} key.
Downloaded From ManualsPrinter.com Manuals 

Authentication Information (MFP)
151
7
LPress [End].
MPress the {OK} key.
NPress the {User Tools/Counter} key.
Note
❒To delete a name entirely, see Deleting a Registered Name.
Reference
p.141 “Deleting a Registered Name”
Displaying the Counter for Each User
This section describes how to display the counter for each user.
ASelect [System Settings] using {U} or {T}, and then press the {OK} key.
BSelect [Administrator Tools] using {U} or {T}, and then press the {OK} key.
CSelect [Disp./Print User Counter]...

Registering Addresses and Users for Facsimile/Scanner Functions
152
7
DSelect [Display] using {U} or {T}, and then press the {OK} key.
ESelect the function you want to display the counter for using {U} or {T},
and then press the {OK} key.
Counters for individual function usage under each user code appear.
FPress the {OK} key.
GPress the {User Tools/Counter} key.
Printing the Counter for Each User
This section describes how to print the counter for each user.
ASelect [System Settings] using {U} or {T},...