Ricoh Aficio MP C3000 User Manual

Tray Paper Settings
53
2
❖Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
Paper Type
No Display
Recycled Paper
 Color Paper
 Letterhead
Label Paper
 OHP (Transparency)
 Special Paper 1-3
Cardstock
 Preprinted Paper
Bond Paper
Paper Thickness
 Thin Paper
 Normal (60-81g/m
2, 16-22lb.)
 Middle Thick (82-105g/m
2, 22-28lb.)
 Thick 1 (106-169g/m
2, 28.5-44.9lb.)
 Thick 2 (170-219g/m
2, 45-58lb.)
 Thick 3 (220-253g/m
2, 58.5-67lb.)...

System Settings
54
2
Paper Thickness
 Thin Paper
 Normal (60-81g/m
2, 16-22lb.)
 Middle Thick (82-105g/m
2, 22-28lb.))
 Thick 1 (106-169g/m
2, 28.5-44.9lb.)
 Thick 2 (170-219g/m
2, 45-58lb.)
 Copying Method in Duplex
2 Sided Copy
 1 Sided Copy
 Apply Auto Paper Select
Yes
No
❖Cover Sheet Tray
Allows you to specify and display the paper tray that is setting cover sheets.
After selecting the paper tray, you can also specify the display timing and
copy method for two-sided copying.
Tray to...

Tray Paper Settings
55
2
❖Slip Sheet Tray
Allows you to specify and display the paper tray that is inserting slip sheets.
After selecting the paper tray, you can also specify the display timing and
copy method for two-sided copying.
Tray to Program
Off
 Bypass Tray
Tray 1
Tray 2
 Tray 3 (optional)
 Tray 4 (optional)
 Copying Method in Duplex
 2 Sided Copy
 1 Sided Copy
Display Time
 At Mode Selected
 Full Time
Note
❒The paper guide for the optional LCT is fixed for A4K, 81/2”×11”K size pa-...

System Settings
56
2Timer Settings
This section describes the user tools in the Timer Settings menu under System
Settings.
❖Auto Off Timer
After a specified period has passed, following job completion, the machine
automatically turns off, in order to conserve energy. This function is called
“Auto Off”. The machine status after the Auto Off operation is referred to as
“Off mode”, or “Sleep mode”. For the Auto Off Timer, specify the time to
elapse before Auto Off.
The default setting is 60 minute(s).
The...

Timer Settings
57
2
❖Facsimile Auto Reset Timer (facsimile)
Specifies the time to elapse before the facsimile mode resets.
The time can be set from 30 to 999 seconds, using the number keys.
The default setting is 30 second(s).
❖Printer Auto Reset Timer (printer)
Specifies the time to elapse before the printer function resets.
On
Off
The time can be set from 10 to 999 seconds, using the number keys.
The default setting is 60 second(s).
❖Scanner Auto Reset Timer (scanner)
Specifies the time to elapse...

System Settings
58
2Interface Settings
This section describes the user tools in the Interface Settings menu under System
Settings.
Network
This section describes the user tools in the Network menu under Interface Set-
tings.
❖Machine IPv4 Address
Before using this machine in the network environment, you must specify the
IPv4 address and subnet mask.
When you select [Specify], enter the [Machine IPv4 Address] and [Sub-net Mask]
as “xxx.xxx.xxx.xxx” (“x” indicates a number).
If the IEEE 1394 interface...

Interface Settings
59
2
❖IPv6 Stateless Address Autoconfiguration
Specify IPv6 Stateless Address Autoconfiguration.
Active
Inactive
❖DNS Configuration
Make settings for the DNS server.
When you select [Specify], enter the [DNS Server] IPv4 address as
“xxx.xxx.xxx.xxx”(“x” indicates a number).
Auto-Obtain (DHCP)
Specify
 DNS Server 1: 000.000.000.000
 DNS Server 2: 000.000.000.000
 DNS Server 3: 000.000.000.000
❖DDNS Configuration
Specify the DDNS settings.
Active
Inactive
❖Domain Name
Specify...

System Settings
60
2
❖NCP Delivery Protocol
Select the protocol for NCP delivery.
IPX Priority
TCP / IP Priority
IPX Only
TCP/IP Only
If you select “IPX Only” or “TCP/IP Only”, you cannot switch the protocol
even if you cannot connect with it. If “NetWare” in [Effective Protocol] is set to
“Inactive”, you can only use TCP/IP.
❖NW Frame Type
Select the frame type when you use NetWare.
Auto Select
Ethernet II
 Ethernet 802.2
 Ethernet 802.3
 Ethernet SNAP
❖SMB Computer Name
Specify the SMB...

Interface Settings
61
2
❖LAN Type
When you have installed the IEEE 802.11b interface unit, select the method of
connection.
Ethernet
 IEEE 802.11b
[LAN Type] is displayed when wireless LAN board is installed. If Ethernet and
IEEE 802.11b (wireless LAN) are both connected, the selected interface has
priority.
❖Ping Command
Check the network connection with ping command using given IPv4 address.
If you fail to connect to the network, check the following, and then retry the
ping command.
 Make sure that...

System Settings
62
2
Parallel Interface
This section describes the user tools in the Parallel Interface menu under Inter-
face Settings.
[Parallel Interface] is displayed when this machine is installed with the IEEE 1284
interface board.
❖Parallel Timing
Sets the timing for the control signal of the parallel interface.
ACK outside
ACK inside
STB down
❖Parallel Communication Speed
Sets the communication speed for the parallel interface.
High Speed
Standard
❖Selection Signal Status
Sets the level for...