Ricoh Aficio MP C3000 User Manual

Network Settings
43
1
❖[File Transfer] → [Scanner Resend Interval Time]
 Web Image Monitor:Cannot be used for specifying the setting.
 SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
 telnet:Cannot be used for specifying the setting.
❖[File Transfer] → [Number of Scanner Resends]
 Web Image Monitor:Cannot be used for specifying the setting.
 SmartDeviceMonitor for Admin:Cannot be used for specifying the setting.
 telnet:Cannot be used for specifying the setting.
Downloaded...

Connecting the Machine
44
1Connecting the Machine to a Telephone 
Line and TelephoneThis section describes how to connect the machine to the telephone lines and se-
lect the line type.
Connecting the Telephone Line
To connect the machine to a telephone line, use a snap-in modular type connector.
R CAUTION:
R WARNING:
Important
❒By law in the United States, you must program your phone number identifi-
cation (your fax number) into your machine before you can connect the public
phone system. See...

Connecting the Machine to a Telephone Line and Telephone
45
1
Selecting the Line Type
Select the line type to which the machine is connected. There are two types: tone
and pulse dial.
Select the line type using “Administrator Tools”.
Note
❒This function is not available in some regions.
Reference
p.133 “Select Dial / Push Phone”
Downloaded From ManualsPrinter.com Manuals 

Connecting the Machine
46
1
Downloaded From ManualsPrinter.com Manuals 

47
2. System Settings
This chapter describes user tools in the System Settings menu.
General Features
This section describes the user tools in the General Features menu under System
Settings.
❖Program / Change / Delete User Text
You can register text phrases you often use when specifying settings, such as
“.com” and “Regards”.
You can register up to 40 entries.
Program/Change
APress [System Settings].
BCheck that [General Features] is selected.
CPress [Program / Change / Delete User Text].
DPress...

System Settings
48
2
❖Copy Count Display (copier/Document Server)
The copy counter can be set to show the number of copies made (count up) or
the number of copies yet to be made (count down).
Up
 Down
❖Function Priority
Specify the mode to be displayed immediately after the operation switch is
turned on, or when System Reset mode is turned on.
Copier
Document Server
Fax
Printer
Scanner
❖Print Priority
Print Priority is given to the mode selected.
Display Mode
 Copier/Document Server
 Facsimile...

General Features
49
2
❖Output: Copier (copier)
Specify a tray to which documents are delivered.
1.Finisher Shift Tray
2.Finisher Upper Tray
3.Finisher Shift Tray
4.Finisher Booklet Tray
5.Finisher Upper Tray
6.Finisher Shift Tray
7.Internal Tray 1
8.Internal Tray 2
Internal Tray 1
 Internal Tray 2
 Finisher Upper Tray
 Finisher Shift Tray
❖Output: Document Server (Document Server)
Specify a tray to which documents are delivered.
Internal Tray 1
 Internal Tray 2
 Finisher Upper Tray
 Finisher...

System Settings
50
2
❖Output: Printer (printer)
Specify a tray to which documents are delivered.
The output trays set on the printer driver have priority over the output tray
specified below.
Internal Tray 1
 Internal Tray 2
 Finisher Upper Tray
 Finisher Shift Tray
❖System Status/Job List Display Time
Specify how long to display the System Status and Job List display for.
On: 15 second(s)
Off
By selecting [On], you can specify a display time between 10 and 999 seconds.
❖Key Repeat
You can enable...

Tray Paper Settings
51
2 Tray Paper Settings
This section describes the user tools in the Tray Paper Settings menu under Sys-
tem Settings.
Important
❒If the specified paper size differs from the actual size of the paper loaded in
the paper tray, a misfeed might occur because the correct paper size was not
detected.
❖Paper Tray Priority: Copier (copier/Document Server)
Specify the tray to supply paper for output.
Tray 1
Tray 2
Tray 3 (optional)
Tray 4 (optional)
When optional paper tray unit is...

System Settings
52
2
❖Tray Paper Size: Tray 2-4
Select the size of the paper loaded in the paper tray.
❖The paper sizes you can set for tray 2 are as follows:
“Auto Detect”, “11×17L”, “81/2×14L”, “81/2×13L”, “81/2×11K”,
“81/2×11L”, “81/4×14L”, “81/4×13L”, “8×13L”, “71/4×101/2K”,
“71/4×101/2L”, “A3L”, “B4JISL”, “A4K”, “A4L”, “B5JISK”,
“B5JISL”, “A5K”, “8KL”, “16KK”, “16KL”
❖The paper sizes you can set for tray 3 are as follows:
 When optional paper tray unit is installed:
“Auto Detect”, “11×17L”,...