Ricoh Aficio MP C2500 User Manual
Have a look at the manual Ricoh Aficio MP C2500 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Administrator Tools 83 2 Program / Change / Delete LDAP Server This section explains how to specify the LDAP server settings. To program/change the LDAP server APress [System Settings]. BPress [Administrator Tools]. CPress [Program / Change / Delete LDAP Server]. DCheck that [Program/Change] is selected. ESelect the LDAP server you want to program or change. When programming the server, select [Not Programmed]. FSet each item as necessary. GPress [OK] after setting each item. For details about LDAP server, see “Programming the LDAP server”. HPress [Exit]. IPress the {User Tools/Counter} key. Reference p.84 “Programming the LDAP server” To delete the programmed LDAP server APress [System Settings]. BPress [Administrator Tools]. CPress [Program / Change / Delete LDAP Server]. DPress [Delete]. ESelect the LDAP server you want to delete. FPress [Yes]. GPress [Exit]. HPress the {User Tools/Counter} key. Downloaded From ManualsPrinter.com Manuals
System Settings 84 2 Programming the LDAP server This section explains how to specify the LDAP server settings. To enter an identification name APress [Change] under “Name”. Register a name for the LDAP server that will appear on the server selection screen of the LDAP search operation. BEnter the server’s identification name. CPress [OK]. To enter a server name APress [Change] under “Server Name”. Register the LDAP server’s host name or IPv4 address. BEnter the LDAP server name. CPress [OK]. To enter the search base APress [Change] under “Search Base”. Select a route folder to start the search from e-mail addresses registered in the selected folder are search targets. BEnter the search base. For example, if the search target is the sales department of ABC company, en- ter “dc=sales department, o=ABC”. (In this example, the description is for an active directory. “dc” is for the organization unit, and “o” is for the company.) Search base registration may be required depending on your server environ- ment. When registration is required, unspecified searches will result in error. Check you server environment and enter any required specifications. CPress [OK]. Downloaded From ManualsPrinter.com Manuals
Administrator Tools 85 2 To enter a port number APress [Change] under “Port No.”. Specify the port number for communicating with the LDAP server. Specify a port that is compliant with your environment. BEnter the port number using the number keys, and then press the {#} key. When SSL is set to [On], the port number automatically changes to “636”. To start SSL communication APress [On]. Use SSL to communicate with the LDAP server. To use SSL, the LDAP server must support SSL. When SSL is set to [On], the port number automatically changes to “689”. SSL setting must be enabled on this machine. For details, consult your net- work administrator. To set authentication APress [TNext]. BPress [On] or [High Security] under “Authentication”. To make a search request to the LDAP server, use the administrator account for authentication. Authentication settings must comply with your server’s authentication set- tings. Check your server settings before setting this machine. [High Security] is available only with LDAP Version 3.0. When [High Security] is selected, the administrator password is encrypted be- fore it is sent to the network. When [On] is selected, the password is sent with- out encryption. Downloaded From ManualsPrinter.com Manuals
System Settings 86 2 To enter the user name and password APress [TNext]. BPress [Change] under “User Name”. When [On] or [High Security] is selected for the authentication setting, use the administrator account name and password. Do not enter the administrator account name and password when using authentication for each individual or each search. CEnter the user name, and then press [OK]. Procedures for the user name setting differ depending on server environ- ment. Check your server environment before making the setting. Example: Domain Name\User Name, User Name@Domain Name, CN=Name, OU=Department Name, DC=Server Name DPress [Change] under “Password”. EEnter the password, and then press [OK]. The user name and password are required for administrator access to the LDAP server. You can set the user name and password in this machine’s Address Book to allow individual authentication access to the LDAP server. Use Administra- tor Tools to select the user name and password you want to use. To test the connection APress [Connection Test]. Access the LDAP server to check the proper connection is established. Check authentication works according to the authentication settings. A connection test is carried out. BPress [Exit]. If the connection test fails, check your settings and try again. This function does not check search conditions or the search base. Downloaded From ManualsPrinter.com Manuals
Administrator Tools 87 2 To set search conditions APress [TNext] twice. BPress [Change] for items you want to use as search conditions from the fol- lowing: [Name], [E-mail Address], [Fax Number], [Company Name], and [Depart- ment Name]. You can enter an attribute as a typical search keyword. Using the entered at- tribute, the function searches the LDAP server’s Address Book. CEnter the attribute you want to use when searching for e-mail addresses, and then press [OK]. The attribute value may change depending on the server environment. Check the attribute value complies with your server environment before setting it. You can leave items blank, but you cannot leave attributes blank when searching for e-mail addresses from the LDAP server Address Book. To set search options APress [TNext] three times. BPress [Change] under “Attribute”. CEnter the attribute you want to use when searching for e-mail addresses, and then press [OK]. To search the LDAP server data using a keyword other than prepared key- words such as Name, E-mail Address, FAX Number, Company Name, and Department Name, specify the attribute for the keyword registered in your LDAP server, and the name to be displayed on the control panel during the search. For example, to search e-mail addresses by employee number, enter “employeeNo.” in the Attribute field, and “Employee No.” in the key display field. The attribute value may change depending on the server environment. Check the attribute complies with your server environment before setting it. DPress [Change] under “Key Display”. Downloaded From ManualsPrinter.com Manuals
System Settings 88 2 EEnter the key display, and then press [OK]. The registered “key display” appears as a keyword for searching LDAP. Without key display registration With key display registration The key does not appear on the search screen unless both “Attribute” and “Key Display” are registered. Make sure you register both to use the optional search. Downloaded From ManualsPrinter.com Manuals
89 3. Copier / Document Server Features This chapter describes user tools in the Copier / Document Server Features menu. General Features This section describes the user tools in the General Features menu under Copier / Document Server Features. ❖Auto Image Density Priority You can set whether Auto Image Density is “On” or “Off” when the machine is turned on, reset, or modes are cleared. Full Color On Off B&W On Off ❖Original Type Priority You can select the original type effective when the power is turned on, or modes cleared. Full Color Text Text/Photo Photo Pale Generation Copy Map B&W Text Text/Photo Photo Pale Generation Copy Map Downloaded From ManualsPrinter.com Manuals
Copier / Document Server Features 90 3 ❖Original Photo Type Priority When you select “Text / Photo” or “Photo” in “Original Type Priority”, you can change the settings of the selected original type. Glossy Photo Printed Photo Copied Photo ❖Original Type Display You can have the original types shown on the initial display. Display Hide If you select [Hide], the display is as below. ❖Paper Display You can choose to have the available paper trays and sizes shown on the ini- tial display. Display Hide If you select [Hide], the display is shown as below. Press [Auto Paper Select] to display paper sizes. ❖Original Orientation in Duplex Mode You can set the original orientation when making two-sided copies. Top to Top Top to Bottom Downloaded From ManualsPrinter.com Manuals
General Features 91 3 ❖Copy Orientation in Duplex Mode You can set the copy orientation when making two-sided copies. Top to Top Top to Bottom ❖Max. Copy Quantity The maximum copy quantity can be set between 1 and 999. The default setting is 999 sheets. ❖Auto Tray Switching If you load paper of the same size in two or more trays, the machine automat- ically shifts to the other when the first tray runs out of paper (when Auto Pa- per Select is selected.) This function is called “Auto Tray Switching”. This setting specifies whether to use Auto Tray Switching or not. With Image Rotation Use to copy when using the Auto Tray Switching function. Without Image Rotation Only copies with Auto Tray Switching if you load paper of the same size and in the same orientation in two or more trays. If the paper is not the same size or in the same orientation, copying is interrupted and the mes- sage “Load paper.” is displayed. Off When a paper tray runs out of paper, copying is interrupted and the mes- sage “Load paper.” is displayed. ❖Tone: Original Remains The beeper (key tone) sounds if you forget to remove originals after copying. On Off If Panel Tone of User Tools (System Settings) is [Off] the beeper does not sound irrespective of the Tone: Original remains setting. ❖Job End Call You can choose whether or not the beeper sounds when copying is complete. If Panel Tone of User Tools (System Settings) settings is [On], the machine beeps to notify you that it did not complete a job for reasons such as copying was interrupted, the paper tray ran out of paper, or a paper jam occurred. On Off Downloaded From ManualsPrinter.com Manuals
Copier / Document Server Features 92 3 ❖Customize: Copier Function Key You can assign up to six frequently-used functions to Copy Function keys. Off 2 originals → 2 Sided: Top to Top 2 originals → 2 Sided: Top to Bottom 2 Sided → 2 Sided 2 Sided: Top to Top → 2 originals 1 Sided → 1 Sided Combine: 2 originals 1 Sided → 1 Sided Combine: 4 originals 1 Sided → 1 Sided Combine: 8 originals 4 originals → 2 Sided Combine: Top to Top 4 originals → 2 Sided Combine: Top to Bottom 1 Sided → Magazine 2 Sided → Magazine Create Margin Original Orientation Batch Staple: Top Slant/Left Staple: Bottom Slant/Left Staple: Left 2 Staple: Top 2 Staple: Top Staple: Bottom Saddle Stitch 2 Holes Left 2 Holes Top 3 Holes Left 3 Holes Top Downloaded From ManualsPrinter.com Manuals