Ricoh Aficio MP 6000SP User Manual
Have a look at the manual Ricoh Aficio MP 6000SP User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 26
Connecting the Machine
16
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], also make settings for Reception Pro-
tocol and POP3 / IMAP4...](http://img.usermanuals.tech/thumb/64/37691/w64_Ricoh_Aficio_MP_6000SP-25.png "Page 26
Connecting the Machine
16
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], also make settings for Reception Pro-
tocol and POP3 / IMAP4...")
![Page 28
Connecting the Machine
18
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], you must also make settings for Recep-
tion...](http://img.usermanuals.tech/thumb/64/37691/w64_Ricoh_Aficio_MP_6000SP-27.png "Page 28
Connecting the Machine
18
1
Note
❒For the Effective Protocol setting, check that the protocol you want to use is
set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to send In-
ternet Fax.
❒When POP before SMTP is set to [On], you must also make settings for Recep-
tion...")
![Page 29
Network Settings
19
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port]....](http://img.usermanuals.tech/thumb/64/37691/w64_Ricoh_Aficio_MP_6000SP-28.png "Page 29
Network Settings
19
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port]....")
![Page 31
Network Settings
21
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port]....](http://img.usermanuals.tech/thumb/64/37691/w64_Ricoh_Aficio_MP_6000SP-30.png "Page 31
Network Settings
21
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
❒When setting [POP before SMTP] to [On], also make setting for [Reception Proto-
col] and [POP3 / IMAP4 Settings].
❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail
Communication Port]....")
![Page 32
Connecting the Machine
22
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending files with an IEEE 802.11b
(wireless LAN) connection.
For details about...](http://img.usermanuals.tech/thumb/64/37691/w64_Ricoh_Aficio_MP_6000SP-31.png "Page 32
Connecting the Machine
22
1
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is displayed when optional wireless LAN interface board is in-
stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the
selected interface takes precedence.
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for sending files with an IEEE 802.11b
(wireless LAN) connection.
For details about...")
![Page 33
Network Settings
23
1
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with an
Ethernet connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is...](http://img.usermanuals.tech/thumb/64/37691/w64_Ricoh_Aficio_MP_6000SP-32.png "Page 33
Network Settings
23
1
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Settings Required to Use the Network Delivery Scanner
This section lists the settings required for delivering data to network.
Ethernet
This section lists the settings required for delivering data to network with an
Ethernet connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[LAN Type] is...")
![Page 34
Connecting the Machine
24
1
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with an
IEEE 802.11b (wireless LAN) connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed....](http://img.usermanuals.tech/thumb/64/37691/w64_Ricoh_Aficio_MP_6000SP-33.png "Page 34
Connecting the Machine
24
1
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
IEEE 802.11b (wireless LAN)
This section lists the settings required for delivering data to network with an
IEEE 802.11b (wireless LAN) connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed....")
![Page 35
Network Settings
25
1
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
an Ethernet connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active]....](http://img.usermanuals.tech/thumb/64/37691/w64_Ricoh_Aficio_MP_6000SP-34.png "Page 35
Network Settings
25
1
Reference
p.49 “Interface Settings”
p.56 “File Transfer”
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
an Ethernet connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active]....")
![Page 36
Connecting the Machine
26
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
an IEEE 802.11b (wireless LAN) connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are...](http://img.usermanuals.tech/thumb/64/37691/w64_Ricoh_Aficio_MP_6000SP-35.png "Page 36
Connecting the Machine
26
1
IEEE 802.11b (wireless LAN)
This section lists the settings required for using network TWAIN Scanner with
an IEEE 802.11b (wireless LAN) connection.
For details about specifying the settings, see “Interface Settings” and “File
Transfer”.
Note
❒As to [Effective Protocol], check if the protocol to use is set as [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter-
face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b)
are...")
Network Settings 21 1 Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[LAN Type] is displayed when optional wireless LAN interface board is in- stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒When setting [POP before SMTP] to [On], also make setting for [Reception Proto- col] and [POP3 / IMAP4 Settings]. ❒When setting [POP before SMTP] to [On], check [POP3] port number in [E-mail Communication Port]. Reference p.49 “Interface Settings” p.56 “File Transfer” Settings Required to Use Scan to Folder Function This section lists the settings required for sending files. Ethernet This section lists the settings required for sending files with an Ethernet connec- tion. For details about specifying the settings, see “Interface Settings” and “File Transfer”. Heading Setting Item Setting Requirements Interface Settings/NetworkMachine IPv4 Address Necessary Interface Settings/NetworkIPv4 Gateway Address Necessary Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Necessary Interface Settings/NetworkEthernet Speed As required Interface Settings/NetworkLAN Type Necessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL / TLS Communication As required Interface Settings/NetworkHost Name As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 22 1 Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[LAN Type] is displayed when optional wireless LAN interface board is in- stalled. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.49 “Interface Settings” p.56 “File Transfer” IEEE 802.11b (wireless LAN) This section lists the settings required for sending files with an IEEE 802.11b (wireless LAN) connection. For details about specifying the settings, see “Interface Settings” and “File Transfer”. Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter- face board is installed. If both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Heading Setting Item Setting Requirements Interface Settings/NetworkMachine IPv4 Address Necessary Interface Settings/NetworkIPv4 Gateway Address Necessary Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Necessary Interface Settings/NetworkLAN Type Necessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL / TLS Communication As required Interface Settings/NetworkHost Name As required Interface Settings/IEEE 802.11bCommunication Mode Necessary Interface Settings/IEEE 802.11bSSID Setting As required Interface Settings/IEEE 802.11bChannel As required Interface Settings/IEEE 802.11bSecurity Method As required Interface Settings/IEEE 802.11bTransmission Speed As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Downloaded From ManualsPrinter.com Manuals
Network Settings 23 1 Reference p.49 “Interface Settings” p.56 “File Transfer” Settings Required to Use the Network Delivery Scanner This section lists the settings required for delivering data to network. Ethernet This section lists the settings required for delivering data to network with an Ethernet connection. For details about specifying the settings, see “Interface Settings” and “File Transfer”. Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[LAN Type] is displayed when optional wireless LAN interface board is in- stalled. When both ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒If [Delivery Option] is set to [On], check that IPv4 Address is set. Heading Setting Item Setting Requirements Interface Settings/NetworkMachine IPv4 Address Necessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Necessary Interface Settings/NetworkEthernet Speed As required Interface Settings/NetworkLAN Type Necessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL / TLS Communication As required Interface Settings/NetworkHost Name As required File Transfer Delivery Option As required File Transfer Fax RX File Transmission As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 24 1 Reference p.49 “Interface Settings” p.56 “File Transfer” IEEE 802.11b (wireless LAN) This section lists the settings required for delivering data to network with an IEEE 802.11b (wireless LAN) connection. For details about specifying the settings, see “Interface Settings” and “File Transfer”. Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter- face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. ❒If [Delivery Option] is set to [On], check that IPv4 Address is set. Heading Setting Item Setting Requirements Interface Settings/NetworkMachine IPv4 Address Necessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Necessary Interface Settings/NetworkLAN Type Necessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL / TLS Communication As required Interface Settings/NetworkHost Name As required Interface Settings/IEEE 802.11bCommunication Mode Necessary Interface Settings/IEEE 802.11bSSID Setting As required Interface Settings/IEEE 802.11bChannel As required Interface Settings/IEEE 802.11bSecurity Method As required Interface Settings/IEEE 802.11bTransmission Speed As required File Transfer Delivery Option As required File Transfer Fax RX File Transmission As required File Transfer Scanner Resend Interval Time As required File Transfer Number of Scanner Resends As required Downloaded From ManualsPrinter.com Manuals
Network Settings 25 1 Reference p.49 “Interface Settings” p.56 “File Transfer” Settings Required to Use Network TWAIN Scanner This section lists the settings required for using TWAIN Scanner under the net- work environment. Ethernet This section lists the settings required for using network TWAIN Scanner with an Ethernet connection. For details about specifying the settings, see “Interface Settings” and “File Transfer”. Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[LAN Type] is displayed when optional wireless LAN interface board is in- stalled. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.49 “Interface Settings” p.56 “File Transfer” Heading Setting Item Setting Requirements Interface Settings/NetworkMachine IPv4 Address Necessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Necessary Interface Settings/NetworkLAN Type Necessary Interface Settings/NetworkEthernet Speed As required Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL / TLS Communication As required Interface Settings/NetworkHost Name As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 26 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using network TWAIN Scanner with an IEEE 802.11b (wireless LAN) connection. For details about specifying the settings, see “Interface Settings” and “File Transfer”. Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter- face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.49 “Interface Settings” p.56 “File Transfer” Heading Setting Item Setting Requirements Interface Settings/NetworkMachine IPv4 Address Necessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Necessary Interface Settings/NetworkLAN Type Necessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL / TLS Communication As required Interface Settings/NetworkHost Name As required Interface Settings/IEEE 802.11bCommunication Mode Necessary Interface Settings/IEEE 802.11bSSID Setting As required Interface Settings/IEEE 802.11bChannel As required Interface Settings/IEEE 802.11bSecurity Method As required Interface Settings/IEEE 802.11bTransmission Speed As required Downloaded From ManualsPrinter.com Manuals
Network Settings 27 1 Settings Required to Use Document Server This section lists the settings required for using Document Server function under the network environment. Ethernet This section lists the settings required for using Document Server function with an Ethernet connection. For details about specifying the settings, see “Interface Settings” and “File Transfer”. Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[LAN Type] is displayed when optional wireless LAN interface board is in- stalled. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.49 “Interface Settings” p.56 “File Transfer” Heading Setting Item Setting Requirements Interface Settings/NetworkMachine IPv4 Address Necessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Necessary Interface Settings/NetworkEthernet Speed As required Interface Settings/NetworkLAN Type Necessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL / TLS Communication As required Interface Settings/NetworkHost Name As required Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 28 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using Document Server function with an IEEE 802.11b (wireless LAN) connection. For details about specifying the settings, see “Interface Settings” and “File Transfer”. Note ❒As to [Effective Protocol], check if the protocol to use is set as [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when optional wireless LAN inter- face board is installed. When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected interface takes precedence. Reference p.49 “Interface Settings” p.56 “File Transfer” Heading Setting Item Setting Requirements Interface Settings/NetworkMachine IPv4 Address Necessary Interface Settings/NetworkIPv4 Gateway Address As required Interface Settings/NetworkDNS Configuration As required Interface Settings/NetworkDDNS Configuration As required Interface Settings/NetworkDomain Name As required Interface Settings/NetworkWINS Configuration As required Interface Settings/NetworkEffective Protocol Necessary Interface Settings/NetworkLAN Type As required/Necessary Interface Settings/NetworkPermit SNMPv3 Communication As required Interface Settings/NetworkPermit SSL / TLS Communication As required Interface Settings/NetworkHost Name As required Interface Settings/IEEE 802.11bCommunication Mode Necessary Interface Settings/IEEE 802.11bSSID Setting As required Interface Settings/IEEE 802.11bChannel As required Interface Settings/IEEE 802.11bSecurity Method As required Interface Settings/IEEE 802.11bTransmission Speed As required Downloaded From ManualsPrinter.com Manuals
Network Settings 29 1 Using Utilities to Make Network Settings This section describes how to make network settings using utilities. You can also specify network settings using utilities such as Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. Note ❒For details about using Web Image Monitor, see “Using Web Image Moni- tor”, Network Guide. ❒For details about using SmartDeviceMonitor for Admin, see “Using SmartDe- viceMonitor for Admin”, Network Guide. ❒For Details about using telnet, see “Remote Maintenance”, Network Guide. Reference “Using Web Image Monitor”, Network Guide “Using SmartDeviceMonitor for Admin”, Network Guide “Remote Maintenance by telnet”, Network Guide Interface Settings This section describes how to make Interface settings using utilities. Change settings by using Web Image Monitor, SmartDeviceMonitor for Admin, and telnet. ❖[Network] → [Machine IPv4 Address] → [Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Machine IPv4 Address] → [Specify] → [Machine IPv4 Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Machine IPv4 Address] → [Specify] → [Sub-net Mask] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [IPv4 Gateway Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Can be used for specifying the setting. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals
Connecting the Machine 30 1 ❖[Network] → [Machine IPv6 Address] → [Manual Configuration Address] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [IPv6 Stateless Address Autoconfiguration] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [DNS Configuration] → [Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [DNS Configuration] → [Specify] → [DNS Server 1] - [DNS Server 3] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [DDNS Configuration] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Domain Name] → [Auto-Obtain (DHCP)] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [Domain Name] → [Specify] → [Domain Name] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. ❖[Network] → [WINS Configuration] → [Primary WINS Server] / [Secondary WINS Server] Web Image Monitor:Can be used for specifying the setting. SmartDeviceMonitor for Admin:Cannot be used for specifying the setting. telnet:Can be used for specifying the setting. Downloaded From ManualsPrinter.com Manuals