Ricoh Aficio MP 1500 User Manual

Copying from the Bypass Tray
25
3
CInsert the paper with the side you
want to copy facing down, and
then adjust the paper guide with
the paper size.
1.Horizontal size
2.Vertical size
3.Extender
4.Paper guides
Note
❒If the guides are not flush
against the copy paper, images
might be skewed or paper mis-
feeds might occur.
❒Do not stack paper over the lim-
it mark, otherwise images
might be skewed or paper mis-
feeds might occur.
❒Swing out the extender to sup-
port paper sizes larger than
A4L, 8
1/2 ×...

Copying
26
3
CSelect the paper size using the
scroll keys, and then press the
{OK} key.
The “ 
Programmed ” message
appears.
When copying onto custom size 
paper
Important
❒You should specify the size of
copy paper to avoid paper mis-
feeds.
ASelect [Paper Size] using {U} or
{T}, and then press the {OK}
key.
BSelect [Custom Size] using {U}
or {T}, and then press the {OK}
key.
CEnter the horizontal size of the
original using the number
keys, and then press the {OK}
key.
Note
❒If you make a mistake, press...

Copying from the Bypass Tray
27
3
When copying onto envelopes
ASelect [Paper Size] using {U} or
{T}, and then press the {OK}
key.
BSelect [Regular Size] using {U}
or {T}, and then press the {OK}
key.
CSelect the envelope size from
[C6 envL] [C5 envL] [DL envL],
and then press the {OK} key.
The “ 
Programmed ” message
appears.
DPress the {#} key.
ESelect [Paper Type] using {U} or
{T}, and then press the {OK}
key.FSelect [Thick Paper] using {U} or
{T}, and then press the {OK}
key.
The “ 
Programmed ”...

Copying
28
3Copier Functions
Adjusting Image Density
You can adjust copy image density to
match your originals.
If you require darker or lighter cop-
ies, adjust image density accordingly.
APress the {Lighter} or {Darker} key
to adjust the density.
Selecting Original Type 
Setting
Select one of the following two types
to match your originals:
❖Text 
Select this when your originals
contain only text (no pictures).
❖Photo 
This can reproduce delicate tones
of photographs and pictures.
Reference
 p.42...

Copier Functions
29
3
Preset Reduce/Enlarge
You can select a preset ratio for copy-
ing.
❖Base Point
The base point of Reduce/Enlarge
differs depending on how the orig-
inal is scanned. When the original
is placed on the exposure glass, the
upper left corner is the base point.
When placed in the ADF, the bot-
tom left corner is the base point.
1.Base point when placing on the
exposure glass.
2.Base point when placing in the
ADF.
Reference
Related default settings
 p.43 “Reproduction Ratio” 
 p.43 “Preset...

Copying
30
3
APress [R/E].
BPress [Zoom].
CEnter the ratio.
To select the ratio using {U} and 
{T} 
AAdjust the ratio using {U} or
{T}.
Note
❒If you have incorrectly en-
tered the ratio, readjust using
{U} or {T}.
❒To change the ratio in incre-
ments of 10%, press and hold
down {U} or {T}.
BPress the {OK} key.
The “ 
Programmed ” message
appears.
To enter the ratio using the 
number keys
AEnter the desired ratio using
the number keys.
BPress the {OK} key.
The “ 
Programmed ” message
appears.
DPlace your...

Copier Functions
31
3
BEnter the number of copy sets us-
ing the number keys.
CPlace your originals.
Note
❒When placing originals on the
exposure glass, start from the
first page to be copied. When
placing originals in the ADF, set
the first page on top.
DPress the {Start} key.
Note
❒When placing originals on the
exposure glass, press the {#}
key after all originals are
scanned.
Changing the number of sets
You can change the number of copy
sets during copying.
Note
❒This function can only be used
when...

Copying
32
3
Downloaded From ManualsPrinter.com Manuals 

33
4. User Tools
User Tools Menu ( System Settings )
❖ General Features (See p.38 “General Features”.)
❖ Tray Paper Settings (See p.38 “Tray Paper Settings”.)
❖ Timer Settings (See p.39 “Timer Settings”.)
Default
 Copy Count Display   Up 
 Display Contrast  Centre 
 Key Repeat   On 
 Measurement Unit  Metric version:  mm
Inch verion: inch
Default
 Tray Paper Size: Tray 1 
Metric version: 8
1/2 × 11 L
Inch version: A4L 
 Paper Type: 
Bypass tray Thick Paper 
Default
 Auto Off Timer   1 min. 
 Energy Saver...

User Tools
34
4
❖ Key Operator Tools (See p.40 “Key Operator Tools”.)
Default
 User Code Man.: Copier   Off 
 Key Counter Management   Off 
 Key Operator Code   Off 
Display/Print Counter  —
 Counter per User Code   Display   —
 Print   —
 Clear   —
 Program/Change User 
Code  Program   —
 Change   —
 Delete   —
 AOF (Always On)   On 
Downloaded From ManualsPrinter.com Manuals