Rexing V1 Car Dash Cam User Manual
Have a look at the manual Rexing V1 Car Dash Cam User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 1 Rexing manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Operating your V1 Dashboard Camera System Settings 31 ©2015 REXING All Rights Reserved. erased during Loop Recording; they remain on the memory card until manually deleted or the card is reformatted.) SYSTEM SETTINGS On Video Recording Mode, Press OK to stop recording then press MENU button twice open System Settings Menu. Date/ Time Setup Use this setting to change the device’s time and date: UP/Down – Change value OK – Move to next segment MENU – Save Settings Note: If the battery remains fully discharged or is removed from the device, the time and date will be reset. Auto Power Off Recommend setting: Off When enabled, this option allows the device to shut down automatically if Recording Mode is not engaged. Beep Sound Recommend setting: On This setting allows you to turn the devices button sound effect on or off.
Operating your V1 Dashboard Camera System Settings 32 ©2015 REXING All Rights Reserved. Language Use the following procedure to change the device’s time and date. Language availability may vary depending on the region. TV Mode Recommend setting: NTSC This feature will setup video output format. Light Frequency Recommend setting: US - 60Hz This option should be set according to the power supply specification used in your country or geographical region (U.S. users should select the 60Hz option). Format Performing this operation will format memory card. Note: any files in the memory card will be lost. DST Enable/Disable Daylight Saving Time Screen Saver Recommend setting: 15 Seconds Select a time duration for the screen to stay lit after recording starts.
Operating your V1 Dashboard Camera System Settings 33 ©2015 REXING All Rights Reserved. Alternatively, you can use a hot key shortcut for this feature. During Recording Mode, press and hold OK to turn the LCD screen on or off. GPS Recommend setting: MI/H Select GPS speed unit (GPS Logger required) Update time of GPS This feature need GPS Logger connected, select a time zone to enable automatic update time of GPS. Restore Default Factory Settings Performing this operation will reset all of your devices settings to their original values. Note: any user-customized settings will be lost. Version Device firmware version information.
Operating your V1 Dashboard Camera Photo Settings 34 ©2015 REXING All Rights Reserved. PHOTO SETTINGS On Photo Mode, Press MENU button once open System Settings Menu. Resolution Recommend setting: 5M This option allows you to set the pixel resolution for captured images. Capture Mode Recommend setting: Single With this feature you can set a timer for automatically capturing images. Sequence Mode Recommend setting: Off This feature allows you to capture a sequence of 3 quick photos with one button press. Quality Recommend setting: Normal This option allows you to set the quality level of captured images. (Lower quality images take up less space on the memory card.) Sharpness Recommend setting: Normal
Operating your V1 Dashboard Camera Photo Settings 35 ©2015 REXING All Rights Reserved. This feature will automatically enhance captured images for a clearer, more distinct picture. White Balance Recommend setting: Auto This setting allows you to adjust the lighting balance for different environments. Color Recommend setting: Auto This feature allows you to choose a color effect for captured images. ISO Recommend setting: Auto This setting enable you to adjust the cameras sensitivity to light when taking photos. The higher the number, the greater the light sensitivity. Exposure Recommend setting: +0.0 This setting allows you to adjust the brightness level of captured images. Anti-Shaking Recommend setting: Off This feature enables the image stabilizer function to reduce blurring of captured images.
Operating your V1 Dashboard Camera Photo Settings 36 ©2015 REXING All Rights Reserved. Quick Review Enabling this feature will allow you to immediately view each captured image for a few seconds before taking the next photo. Date Stamp Recommend setting: Date/Time This feature will automatically apply a date and/or time stamp to captured images.
Operating your V1 Dashboard Camera Updating Firmware 37 ©2015 REXING All Rights Reserved. Updating Firmware The following procedure will allow you to use the Rexing website to update firmware for your V1 Dashboard Camera. This is necessary for enabling all available features on your device. 1. Download the firmware file to your computer 2. Unzip the file 3. Format your memory card in your computer (or unit) 4. Copy the FW96650A.bin logo.jpg and logo2.jpg files to the root of your memory card 5. Put card into camera 6. Power camera on (make sure the camera is plugged in) 7. The camera will update automatically. The screen will stay off but the status light will light up; it will take 30-60 seconds 8. (important) After updating, format the memory card or it will flash every time 9. Do not disconnect power cord, hold power button to reboot unit
Operating your V1 Dashboard Camera Playback 38 ©2015 REXING All Rights Reserved. Playback Mode You can play back recorded video on your device using the following steps: 1. Press REC to stop recording 2. Press MODE twice to switch from Recording to Playback Mode 3. Press and hold the UP or DOWN button to navigate through the stored video files 4. Press OK to start playback for the selected video 5. Press OK again to pause playback 6. Press MODE to stop playback 7. FAST FORWARD: While video is playing, press the UP button one or more times to set fast playback speed (2X / 4X / 8X) 8. FAST REWIND: While video is playing, press the DOWN button one or more times to set reverse playback speed (-2X / -4X / -8X) Deleting Files To delete one particular file: 1. Press the UP or DOWN button to navigate through the stored video files 2. Press MENU to view options for the highlighted file: Delete/Protect/Slide Show 3. Press the DOWN button once to select Delete 4. Press OK once to view options for Current MOV file or ALL files. Select Current MOV 5. Press OK twice to delete file
Operating your V1 Dashboard Camera Playback 39 ©2015 REXING All Rights Reserved. To delete all files: 1. Press on UP or DOWN button to navigate through the video files 2. Press OK to enter Video 3. Press MENU to view options for this file: Delete/Protect/Slide Show 4. Press the DOWN button once to select Delete 5. Press OK once to view delete options for Current MOV file or ALL files. Select ALL and press OK 6. Press OK again to delete all files PC Playback Function Minimum System Requirements Windows Media Player/QuickTime Media Player OR any media player compatible with .MOV files Accessing Video Files Insert the SD card into your computer, or plug your camera into the computer USB port and select “Mass Storage” to access the video files.
Operating your V1 Dashboard Camera Playback 40 ©2015 REXING All Rights Reserved. Driving Recorder Player Instruction **APPLICIBLE TO THE GPS LOGGER ONLY** Driving Recorder Player Software is designed to play recorded videos along with displaying GPS data and driving routes on a computer. Minimum System Requirements: CPU: Intel Core 2 Duo 2.4GHz RAM: 1 GB of free RAM Monitor: Resolution1280*720(or above) OS: Windows 7/8 (32bit/64bit ) or Mac OS X Software Installation Use included CD ROM and follow steps in Driver Software Installation guide. Or go to download.rexingusa.com to download software. Accessing Video Files Insert the SD card into your computer, or plug your camera into the computer USB port and select “Mass Storage” to access the video files. Playback Double click the Driving Recorder Player application icon. Drag and drop a MOV file into the player to watch. You can use this player to play recorded videos and to show a map with the recorded driving routes. Windows OS Users: if your computer does not have video codec installed, you may not be able to play MOV files on your computer. Run the MOV Player Plugin XP.exe file from the CD ROM to install a MOV video codec. Depend on your OS security setting, you may need to right click software icon and Run As Administrator.