Rexing V1 Car Dash Cam User Manual

Getting Started Quick Start 
21  ©2015 REXING All Rights Reserved. 
Installation 
Video guide: video.rexingusa.com 
 
 1. Attaching the front camera to the window mount  
Before the device can be used in a car, it is essential to first install a properly 
attached window mount. Make sure that you place the recorder in a safe, 
appropriate location where it will not obstruct the driver’s view.  
Clean windshield before apply mount, do not attach camera for at least 20 
minutes. 
 
2. Inserting a memory...

Getting Started Quick Start 
22  ©2015 REXING All Rights Reserved. 
3. Connecting the charger to the cars 12V DC outlet 
Be sure to connect only the Rexing-approved charger designed and supplied 
specifically for use with your device. Using an incompatible charger can 
cause serious personal injury or damage to your device.  
 
4. Format the memory card 
To ensure the memory card works on the dash cam, we recommend using 
the dash cam to format the memory card, (please refer to Formatting the 
Memory...

Getting Started Quick Start 
23  ©2015 REXING All Rights Reserved. 
• If the battery is completely discharged, the device will not turn on 
immediately when the charger is connected. Allow a depleted battery 
to charge for a few minutes before attempting to turn on the device. 
• The device can be used while it is charging, although it may take 
longer to fully charge the battery. 
• If the device receives an unstable power supply while charging, the 
screen may not function properly. If this happens,...

Getting Started Quick Start 
24  ©2015 REXING All Rights Reserved. 
• Push the memory card into the slot until it locks in place. 
• Click sound when memory card locks in place. 
• Using a coin or other tool push memory card will make it easier. 
 It is recommended that you reformat a memory card after every time that 
images are transferred from it to a computer, or at least once a month. 
 
Reformatting a memory card keeps important elements of data and file structure 
clean, helping to prevent error...

Getting Started Quick Start 
25  ©2015 REXING All Rights Reserved. 
1. Press the REC button to stop the device from recording 
2. Press and hold the        ON/OFF button to switch off the device 
3. Gently push the memory card in and let go until it unlocks 
 
Do not remove the memory card while the device is transferring or 
accessing information. Doing so can result in data loss or corruption, or 
damage to the memory card or device. Rexing is not responsible for losses that 
result from the use of...

Getting Started Quick Start 
26  ©2015 REXING All Rights Reserved. 
Turning the Device On and Off 
Press and hold the        ON/OFF button for a few seconds to turn on the device. 
A welcome message will be displayed onscreen as shown in the image below. 
 To turn off the device, again press and hold the        ON/OFF button for a few 
seconds. A goodbye message will be displayed onscreen as shown in the 
image below. 
 Note: The V1 Dashboard Camera will switch on and off automatically if you 
keep it...

Getting Started Quick Start 
27  ©2015 REXING All Rights Reserved. 
Basic Operating 
• Rexing Dash cam will atomically start recording once power on, the 
indicator and the red dot icon  on screen should flashing while 
recording.  
• During recording, press EMERGICY  button to lock current 
video clip, so the loop recording will not overwrite locked video clip. All 
locked video clip files can be found under \CARDV\MOVIE\RO folder in 
memory card. 
• Press SCREEN  button to turn screen on/off 

Operating your V1 Dashboard Camera System Settings 
28  ©2015 REXING All Rights Reserved. 
VIDEO SETTINGS 
On Video Recording Mode, Press OK to stop recording then press MENU 
button once open System Settings Menu. 
Resolution 
Recommend setting: 1080FHD 
Use this setting to set the recording resolution. 
Approximately recording time: 
Memory card size 1080P Resolution 720P Resolution 
8GB 1.3 hour 2.4 hour 
16GB 2.7 hour 4.8 hour 
32GB 5.3 hour 10 hour 
64GB 11 hour 19 hour 
128GB 21 hour 39 hour 
Loop...

Operating your V1 Dashboard Camera System Settings 
29  ©2015 REXING All Rights Reserved. 
It is recommended that you reformat a memory card after every time that 
images are transferred from it to a computer, or at least once a month. This 
keeps important elements of data and file structure clean, helping to prevent 
error messages and missing images.  
Remember to always make backup copies of all important data stored on the 
device. The manufacturer’s warranty does not cover loss of data resulting...

Operating your V1 Dashboard Camera System Settings 
30  ©2015 REXING All Rights Reserved. 
Recording Audio 
Recommend setting: On 
You may choose to record audio with video, or turn off the microphone so that 
all recorded videos will be muted. 
Alternatively, you can use a hot key shortcut for this feature. During Recording 
Mode, press the DOWN button to mute / unmute the microphone for video 
recording. 
Date Stamp 
You have the option to display the date and time in your videos. Note that the 
date...