RCA 60 Manual

11

Format/Redial (button)
CID (button)--Only applicable for 544/5
Delete/Mute (button)
# Pause (button)
Int/Transfer (button)
Talk (button)
Line (button)
Select/Save (button)
Conf/Store (button)Hold (button)
Flash/Exit (button)
DIR (button)
Display
Menu (button)
Handset Layout
Connections and Setup
charge indicator
Privacy (button)
End (button)
Visual Ring Indicator
Headset Jack
Handset Charge Cradle
VOL 5 (volume up button)
VOL 6 (volume down button) 

1

Connections and Setup
Telephone SetupThis handset has several programmable functions.
NOTE: Use the Select/Save button to go into the sub-menu, and use the Exit\
 button to go to the previous menu.
Language1. Press the Menu button once, LANGUAGE will show in the display.2. Press the Select/Save button to select. 
3. Press the VOL ( 6 or 5) button on the handset to select ENGLISH, FRANCAIS, or ESPANOL. The default is “ENGLISH”.
4. Press the Select/Save button again to store the setting.
Ring...

1

Auto Talk
1. Press Menu button once, then press the VOL ( 6 or 5) buttons until PHONE SETTING is displayed.2. Press Select/Save button to select.
3. Use the VOL ( 6 or 5) buttons of the sub-menu until AUTO TALK is displayed.4. Press Select/Save button to select.
5. Use the VOL ( 6 or 5) buttons to select ON or OFF. Select ON to let the handset pick up the call by lifting it up from the cradle.6. Press the Select/Save button to save.
NOTE: A check mark on the right side indicates the status of...

14

Connections and Setup
Regional Code
1. Press Menu button once, then press the VOL ( 6 or 5) buttons until PHONE SETTING is displayed.
2. Press Select/Save button to select.
3. Use the VOL ( 6 or 5) buttons of the sub-menu until REGIONAL CODE is displayed.
4. Press Select/Save button to select
5. Use the number pad to enter your three digit area code. The default is “---“.
6. Press the Select/Save button to store the setting. If you make a mistake, press Delete to erase input.
Clear All Memory
1....

15

Basic Operation
Visual Indicators
CHARGE Indicator on the Cradle
The CHARGE indicator is lit when the handset is charging.  Ring Indicator on Handset
The Visual Ring Indicator will flash when there is an incoming call or the base is paging the cordless handset.
Answering a Call1. Press the Talk button on the handset. (The base displays CORDLESS H/S IN USE).2. When finished, press the End button or replace the handset in the charge cradle to hang up.
Making a Call1. Press the Talk button to access an...

1

1. Press the Format/Redial button.
2. Use the VOL ( 6 or 5) to scroll to the desired number.
3. Press the Talk button to access an available line or select your preferred line; number is dialed automatically.
Conference Call
This feature allows you to have a 3-way conversation using any combination of 2 lines (or a line and an intercom call).
To connect and conference:
1. To make a call, select the line you want and dial the number (or make an\
 intercom call). If you already have someone on the...

1

Speakerphone Mode
1. During a call, press the Talk button to change to speakerphone mode. 
2. Press Talk again to change it back to handset mode. 
Hold
1. Press the Hold button to put a call on hold. 
2. To take a call off hold, press the Hold button again.
3. To switch a call on hold from the base to the cordless handset, press the Hold button on the cordless handset.
Transfer
You can transfer the call to another extension. 
1. Press the Int/Transfer button when it is in TALK mode.
2. Key in...

1

Battery Low
If the handset battery is low, the unit will emit the alert tone and show BATTERY LOW in the display to remind you that the battery needs charging. If the battery voltage is very low, the handset will automatically shut down. Place handset in the charge cradle to recharge battery.
Paging All Extension from the Cordless Handset
In the standby mode, press the Int/Transfer button and then press zero (0) button twice to activate page all extensions function.
Paging the Cordless Handset...

1

Two-Way Intercom Calls
1. To make an intercom call, first press the Hold button to place the external call on hold. Then, press the Int/Transfer button followed by the extension ID number.
2. To answer the intercom call, press Hold to place the current call on hold. Then press Int/Transfer or Talk button to answer the intercom call. When finished, press Int/Transfer or End button to end the intercom call. Press Hold button to retrieve the external caller.
Three-Way Intercom Calls
1. Press Hold...

0

4. Use the touch-tone pad to enter a name (up to 15 characters). More than one letter is stored in each of the number keys. For example, to enter Bill Smith, press the 2 key twice for the letter B. Press the 4 key 3 times for the letter I. Press the 5 key 3 times for the letter L. Press the 5 key 3 times for the second letter L, and press the 1 key to insert a space between the first and last name. Press the 7 key 4 times for the letter S; press the 6 key once for the letter M; press the 4 key 3...