Proxima Projector Dp2810 User Manual

1Ð6  ¥  UserÕs Guide Chapter 1  ¥  Introducing the Proxima
¨ Desktop Projector
Control Panel
BrightnessSync
Volume
VideoMenu/Lamp
OVERTEMPREPLACE LAMP
Figure 1-3
The control panel
CONTROLFUNCTION
VOLUMEAdjusts audio level of the projectors internal speakers.BRIGHTNESS Increases/decreases brightness of the projected image.SYNCCompensates for fine variations in the timing of the
computer video signal.
VIDEO
Switches between computer video, NTSC/PAL/SECAM
video, or S-VHS.
MENU/
Press once to display the...

UserÕs Guide  ¥  1Ð7 Chapter 1  ¥  Introducing the Proxima
¨ Desktop Projector
Warning and Alert Lights
Warning and alert lights on the control panel indicate the
Desktop ProjectorÕs operating condition.
Levels Menu
Press the MENU/    key once to display the Levels Menu. This
menu varies automatically based on the type of video source
displayed.
BRIGHTNESS
SYNC
VOLUME
RED
GREENBLUE
Figure 1-4
Levels Menu for computer video
BRIGHTNESS
R     TINT     G
SIG LEVELVOLUME
Figure 1-5
Levels Menu for...

1Ð8  ¥  UserÕs Guide Chapter 1  ¥  Introducing the Proxima
¨ Desktop Projector
Setup Menu
Press the MENU/    key a second time to display the Setup Menu.
SOURCEIMAGECOLORSPROJECTION
FREQUENCYLANGUAGESTORE?SETTINGSVGA640x480NORMAL226981FORWARD
8 0 0 ENGLISH NOFACTORY
Figure 1-6
Setup Menu
CONTROLFUNCTION
SOURCELists the name of the input source detected by the
projector.
Accessible in modes where other choices are
available, based on the type of signal the projector
is receiving.
IMAGE Switches between...

UserÕs Guide  ¥  1Ð9 Chapter 1  ¥  Introducing the Proxima
¨ Desktop Projector
Remote Control
The Remote Control contains all the key functions available on
the Control Panel and provides access to additional functions not
available on the Control Panel or through the Menu Window.


Blue keys = PC/MAC Remote softw
VIDEO
–  SYNC  +MENU
CYCLOPS
LAMP
-   BRIGHTNESS   + -   VOLUME   +
< REV
PAUSE FWD >MUTETEXT

Active Matrix
FREEZE
Figure 1-7
Remote control unit
CONTROLFUNCTION
MUTE Toggles sound OFF/ON to...

1Ð10  ¥  UserÕs Guide Chapter 1  ¥  Introducing the Proxima
¨ Desktop Projector
Getting Help
For technical support, please contact your dealer or call Proxima
at:
U.S.A. and Canada Outside U.S.A. and
CanadaEurope
(619) 457-5500
Press 1 for
Customer Service.
(619) 457-8542
(fax)(619) 457-5500
Press 1 for Customer
Service.
(619) 622-0173 (fax)+31-43-358-5200
+31-43-358-5201
(Fax) 

UserÕs Guide  ¥  2Ð1 Chapter 2  ¥  Detailed Setup
Chapter 2
Detailed
Setup
Your Proxima
Desktop
ProjectorBefore you begin, examine the components of the projector.
4
1
2
3
5

9
7
6

VIDEOMENUFREEZELAMP< REVFWD >MUTEPAUSE–  BRIGHTNESS  +
Blue keys = PC/MAC Remote softwareTEXT–  VOLUME  +–    SYNC    +CYCLOPS
12
11
3
13
14
15
7
8
10
16

S-VHS
VIDEO IN
Figure 2-1
The Proxima Desktop Projector and Remote Control
(1) Control Panel   (9) Projection Lens Assembly
(2) Mirror Assembly         and Focus Ring...

2Ð2  ¥  UserÕs Guide Chapter 2  ¥  Detailed Setup
Opening the Projector
1. Place the projector on a solid, flat surface at a right angle
(perpendicular) to the projection screen and parallel to the
floor. If youÕre using a media cart, make sure the wheels are
locked to prevent it from moving.
Perpendicular to the
projection screen
Parallel to the floor Top View
Side View
Projection Screen
Figure 2-2
Positioning the Desktop Projector
Getting
Started 

UserÕs Guide  ¥  2Ð3 Chapter 2  ¥  Detailed Setup
2. Grasp the front edge of the cover assembly at the upper front
of the projector and raise it until it reaches the first stop. You
can use the projector in this position, or raise the cover
assembly to the second stop; whichever you prefer.
Figure 2-3
Opening the cover assembly
CAUTION! The Desktop Projectors cover and projection
mirror assemblies have been designed to limit over-extension.
Applying excessive pressure can damage the projector.
+
 

2Ð4  ¥  UserÕs Guide Chapter 2  ¥  Detailed Setup
3. Place your fingers beneath the mirror assembly at the lower
center of the front panel and raise it until it reaches a 45û angle
(approximately) relative to the top of the lens assembly.
Figure 2-4
Raising the mirror assembly
Figure 2-5
The Desktop Projector in the open position 

UserÕs Guide  ¥  2Ð5 Chapter 2  ¥  Detailed Setup
4. After you turn on the projector and computer, if you want to
raise or lower the projected image, just move the mirror
assembly to the appropriate angle.
CAUTION! DO NOT use the assembly cover or projection
mirror as a handle. TO AVOID DAMAGE, YOU MUST
COMPLETELY CLOSE THE PROJECTOR BEFORE
MOVING IT.
If you must move the projector while it is open, grasp it securely
at the sides by the lower part of the housing to support the weight
of the unit....