Proxima Pro Av 9350 Projector User Manual
Have a look at the manual Proxima Pro Av 9350 Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 100 Proxima manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
31 COMPUTER MODE The number of the total vertical lines. Adjust the number to match the image of your personal computer. Total lines Recalls the parameter data that was previously adjusted.Reset Stores the parameters in the memory.Stored Clears the parameter data previously set.Mode free Closes the PC ADJUST Menu.Quit The number of the total dots in one horizontal period. Adjust the number to match the image of your computer. Total dots Adjustment of the horizontal or vertical picture position. When the image is not centered on the screen, adjust each of those items. Horizontal / Vertical Adjustment of the clamp level. When the image has a dark bar(s), try this adjustment. Clamp Adjustment of the area displayed with this projector. Select the resolution at the Display area dialog box, or adjust the number at the column of “H” or “V” to match the resolution of the image. Display area Adjustment of the horizontal height or vertical width of the image. Horizontal Scale / Vertical Scale Each of the keys operates as follow. Press the SELECT button at this column to adjust “Clamp”, “Fine sync,” “Display area”, “Horiz. scale” or “Vert. scale” . Adjust the picture as necessary to eliminate flicker from the display. Fine sync NOTE :The Display area, the Horiz. scale and the Vert. scale cannot be adjusted when “480p”, “575p”, “HDTV720p”, “HDTV1035i” or “HDTV1080i” is selected on the SYSTEM MENU (P28 and 29). Point the arrow at the Display area and press the SELECT button. The Display area dialog box appears.
32 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. When selecting “” the custom setting dialog box will appear. Move the arrow to the item that you want to change by pressing the POINT UP/DOWN button, and adjust each value by pressing the SELECT button to match with the image. 1 2 Adjust the picture as necessary to eliminate flicker from the display. (From 0 to 255.) The number of the total dots in one horizontal period. Adjust the number to match your PC image. Point to to decrease contrast, and select to increase contrast. (From 0 to 63.) Point to to adjust the image darker, and select to adjust brighter. (From 0 to 63.) Close the PICTURE IMAGE ADJUSTMENT Menu.Move the arrow to or and press SELECT button. Recalls the data previously adjusted.Reset Stores the adjusted data in the memory.Stored Closes the PICTURE IMAGE ADJUSTMENT Menu.Quit Move the arrow to the color that you want to adjust. Point to to lighten the color and select to deepen the color. (From 0 to 63.) Each of the keys operates as follow. Fine sync Total dots White balance (Red / Green / Blue) Contrast Brightness Point to to soften the image, and select to sharpen the image. (From 0 to 15.) Sharpness PICTURE IMAGE ADJUSTMENTS NOTE : The Fine sync and the Total dots cannot be operated when the input signal is digital from DVI terminal or “RGB” is selected on the SYSTEM MENU (P28 and 29). The Progressive cannot be selected when the input signal is digital from DVI terminal or “480p”, “575p” or “HDTV720p” is selected on the SYSTEM MENU (P28 and 29). Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the function that you want to select and then press SELECT button. Normal picture level preset on this projector. This picture level can be set by pressing the NORMAL button. Standard Picture level adjusted for the picture with fine tone. Real Picture level adjusted manually in the custom setting dialog box. Custom Move the arrow to the level and press the SELECT button. Press the SELECT button at “” to adjust the picture level manually. The level being selected. COMPUTER MODE Gamma Set “On” to provide progressive scan mode. Progressive Press the SELECT button to set the function “On” or “Off”.Point to or to obtain better balance of contrast. (From 0 to 16.)
33 The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Side Control or on the Remote Control Unit). The “Standard” display will be displayed on the screen for a few seconds. NORMAL FUNCTION Standard PICTURE POSITION ADJUSTMENT The position of the image can be adjusted vertically and horizontally through PICTURE POSITION ADJUSTMENT. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select POSITION and press the SELECT button. The PICTURE POSITION dialog box will appear. 1 2Select the arrow to the direction (described as , , or ) that you want to adjust by pressing the POINT UP/DOWN/ LEFT/RIGHT buttons, and then press the SELECT button. Select the arrow to the direction (described as , , or ),and then press the SELECT button.Each of the keys operates as follow. Recalls the setting data previously set.Reset Stores the setting data in the memory.Stored Closes the PICTURE POSITION Menu.Quit COMPUTER MODE AUTO IMAGE FUNCTION The AUTO IMAGE function cannot be operated when the input signal is digital from DVI terminal or RGB, 480p, 575p, HDTV720p, HDTV1035i or HDTV1080i is selected on the SYSTEM SELECT menu. Press the AUTO IMAGE button on the Side Control or on the Remote Control Unit to automatically adjust Fine sync., Total dots and Screen position for most computers. It will take about 10 seconds. NOTE:Some computers may not be fully adjusted with the Auto Image Function. In that case, use the Picture Image and/or Picture Position adjustments (P32, 33) to make fine-adjust then after the Auto Image Function is executed.
34 COMPUTER MODE PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box PICTURE SCREEN Menu will appear. To adjust the image size or pan the image, select Digital zoom in the dialog box. The ON-SCREEN menu and SCREEN ADJUST menu disappears, and the magnifying glass icon and the message “D. Zoom” is displayed. This projector also enters Digital Zoom mode by pressing the D.ZOOM /button on the Remote Control Unit. 1 Refer to the following for operation. Expand function To expand the image size, press the D.ZOOM button or the SELECT button. The image is magnified by degrees. Compress function To compress the image size, press the D.ZOOM button or the RIGHT CLICK button. The size of image is reduced by degrees. Panning function To pan the image, press the POINT UP/DOWN/LEFT/RIGHT buttons. Panning function can work only when the image is larger than the screen size. To cancel Digital Zoom mode, press any button except D.ZOOM /, SELECT, RIGHT CLICK, or POINT button. To adjust the image to 1024 x 768, press NORMAL button. To make the image into its original size, select True in the dialog box. When the original image size is larger than the screen size (1024 x 768), the image can be panned by pressing the POINT UP/DOWN/LEFT/RIGHT buttons.Move the arrow to the function and press the SELECT button. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the function that you want to select and then press SELECT button.2 True Digital Zoom Keystone When the image is distorted vertically, select Keystone in the dialog box. The ON-SCREEN menu and SCREEN ADJUST menu disappears and the message “Keystone” is displayed. Correct the Keystone distortion by pressing the KEYSTONE /button or the POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT on page 24. NOTE The True and the Digital Zoom cannot be operated when “RGB”, “480p”, “575p”, “HDTV720p”, “HDTV1035i” or “HDTV1080i” is selected on the SYSTEM MENU (P28 and 29). This projector cannot display any resolution higher than 1280 X 1024. If your computer’s screen resolution is higher than 1280 X 1024, reset the resolution to the lower before connecting the projector. The image data in other than XGA (1024 x 768) is modified to fit the screen size in the initial mode. The normal Panning Operation may not function properly if the computer system prepared with the PC Adjust is used.
35 VIDEO MODE Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select VIDEO SOURCE and press the SELECT button. Another dialog box VIDEO SOURCE Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the source that you want to select, and then press the SELECT button. 1 2 This box indicates the Video source being selected. SELECTING VIDEO SOURCE When connecting to those equipment, select the type of Video source in VIDEO SOURCE Menu. Video Y/CWhen connect the separate Y/C video output from the video equipment to the VIDEO/Y and C jacks, select Y/C in VIDEO SOURCE Menu. When connect the composite video output from the video equipment to the VIDEO/Y jack, select Video in VIDEO SOURCE Menu. S-VideoWhen connect the S-Video output from the video equipment to the S-Video jack, select S-Video in VIDEO SOURCE Menu. WHEN SELECT THE INPUT 3 (AV TERMINAL ) 3 Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select INPUT SOURCE and press the SELECT button. Another dialog box INPUT SOURCE Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to Y, Pb/Cb, Pr/Cr and then press the SELECT button. 1 2 Y, Pb/Cb, Pr/Cr When connect the component video output (Cr, Y, Cb or Pr, Y, Pb) from the video equipment to the R/Pr, G/Y and B/Pb jacks. When connecting to those equipment, select the type of Input source in INPUT SOURCE Menu. WHEN SELECT THE INPUT 2 (5 BNC TERMINAL )
36 VIDEO MODE SELECTING COLOR SYSTEM Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SYSTEM and press the SELECT button. Another dialog box VIDEO SYSTEM Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to Auto, and then press the SELECT button. 1 2 The projector automatically detects the incoming Video system, and adjusts itself to optimize its performance. When the Video System is PAL-M or PAL-N, select the system manually. If the projector cannot reproduce the proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.Move the arrow to the Mode and press the SELECT button. This box indicates the system being selected. Move the arrow to the Mode and press the SELECT button. This box indicates the system being selected. Auto PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N The projector automatically detects the incoming Video signal, and adjusts itself to optimize its performance. If the projector cannot reproduce the proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i-50 and 1080i-60. Auto COMPONENT VIDEO SIGNAL FORMAT WHEN SELECT THE INPUT 3 (AV TERMINAL ) WHEN SELECT THE INPUT 2 (5 BNC TERMINAL )
37 VIDEO MODE PICTURE IMAGE ADJUSTMENT Each of the keys operates as follow. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select IMAGE and press the SELECT button. Another dialog box PICTURE IMAGE ADJUSTMENT Menu will appear. 1 Closes the PICTURE IMAGE ADJUSTMENT Menu. Point to button to lighten the image, and select to deepen the image. (From 0 to 63.) Point to button to increase purple, and select to increase green. (From 0 to 63.) Point to button to decrease contrast, and select to increase contrast. (From 0 to 63.) Point to button to darken the image, and select to brighten the image. (From 0 to 63.) Recalls the data previously adjusted.Reset Stores the data in the memory.Stored Closes the PICTURE IMAGE ADJUSTMENT Menu.Quit Point to button to soften the image, and select to sharpen the image. (From 0 to 31.) Color Tint Contrast Brightness Sharpness Move the arrow to the color that you want to adjust. Point to to lighten the color and select to deepen the color. (From 0 to 63.) White balance (Red / Green / Blue) Set “On” to reduce the noise (rough parts) of the image. Noise reduction When selecting “” the custom setting dialog box will appear. Move the arrow to the item that you want to change by pressing the POINT UP/DOWN button, and adjust each value or change the setting On or Off by pressing the SELECT button to match with the image. 2Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the function that you want to select and then press SELECT button. Normal picture level preset on this projector. This picture level can be set by pressing the NORMAL button. Standard Picture level adjusted for the picture with fine tone. Cinema Picture level adjusted manually in the custom setting dialog box. Custom Move the arrow to or and press SELECT button. Move the arrow to the item and press the SELECT button. Press the SELECT button at “” to adjust the picture level manually. Press the SELECT button to set the function “On” or “Off”. Set “On” to provide progressive scan mode. Progressive The level being selected. NOTE : The Noise Reduction cannot be operated when the video signal types and systems as follow. Composite video signal (SECAM, NTSC4.43, PAL-M and PAL-N systems). Y/C separate video and S-video signal (SECAM, PAL-M and PAL-N systems). Component video signal. The Progressive cannot be operated when “480p”, “575p” or “720p” is selected on the SYSTEM MENU (P36). Gamma Point to or to obtain better balance of contrast. (From 0 to 16.)
38 VIDEO MODE The normal picture level is preset on this projector at the factory and can be restored anytime you press the NORMAL button (located on the Side Control or on the Remote Control Unit). The Standard display will be displayed on the screen for a few seconds. NORMAL FUNCTION Standard PICTURE SCREEN ADJUSTMENT This projector has a picture screen resize function, which enables you to display the desirable image size. Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SCREEN and press the SELECT button. Another dialog box PICTURE SCREEN ADJUSTMENT DISPLAY will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the screen size that you want to set, and then press the SELECT button. 1 2 Normal Video Image size with 4 x 3 aspect ratio. Resizes the image for wide screen size with 16 x 9 aspect ratio. Move the pointer to the function and press the SELECT button. Regular Wide Keystone When the image is distorted vertically, select Keystone in the dialog box. Correct the Keystone distortion by pressing KEYSTONE / button or POINT UP/DOWN button(s). Refer to KEYSTONE ADJUSTMENT on page 24. NOTE :The Regular and the Wide cannot be operated when “720p”, “1035i”, “1080i-50” or “1080i-60” is selected on the SYSTEM MENU (P36).
39 SETTING SETTING MENU Press the MENU button and the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING Menu will appear. Press the POINT DOWN button and a red-arrow icon will appear. Move the arrow to the item that you want to set, and then press the SELECT button to set it (For example On or Off). 1 2 Blue back When this function is “On” this projector will produce a blue image instead of the video noise on the screen when the input source is unplugged or turned off. Display Set the Pointer to the item and press the SELECT button. Ceiling When this function is “On” the top / bottom and the left / right reversed picture is provided to project the image from a ceiling mounted projector. Rear When this function is “On” the left / right reversed picture is provided to project the image to a rear projection screen. Ceiling function Rear function Split wipe Turn this function “On” in the SETTING menu. The picture will change into next one by sliding black image side ways like drawing the black curtains when the input source is turned into another one. This function turns the Projection Lamp off when the projector detects signal interruption and the projector is not used for a certain period in order to reduce power consumption and maintain the Lamp-life. (This projector is shipped with this function ON.) Power Management function operates to turn the Projection Lamp off when the input signal is interrupted and the projector is not operated over 5 minutes. This function operates as follows; 1. When the signal is interrupted, “No signal” and the counting down (5 minutes) display appears. 2. When the Projection Lamp turned off, the READY indicator turns off. 3. After 90 seconds, the READY indicator flashes and the Lamp can be turned on again (Power Management mode). In this Power Management mode, the Projection Lamp is automatically turned on when the input signal connected or the projector is operated with any button on the Side Control or the Remote Control. Power management Time left until Lamp off. This function decides whether to display the On-Screen Displays. On1 ···shows all the On-Screen Displays. On2 ···shows the On-Screen Displays except the Preparation Display (Our Logo). Off ····sets the On-Screen Displays disappeared except; ON SCREEN MENU “Power off?” message P-TIMER
40 Remote control This projector has two different remote transmit codes; the factory-set normal code (Mode 1) and the secondary code (Mode 2). This switching function prevents the remote control operation mixture (jam) when operating several projectors or video equipment together. When operating the projector in “Mode 2” both projector and Remote Control must be switched to “Mode 2”. To change the code of the projector; Set the Remote control in the SETTING menu to “Mode 2”. To change the code of the Remote Control; Press both the MENU and the NORMAL buttons on the Remote Control together for over 10 seconds. After changing the code, make sure the Remote Control operates properly. To return to the normal code (Mode 1), operate both projector and Remote Control in the ways above again. NOTE:When the ALL-OFF switch on the Remote Control Unit is turned to ALL-OFF the remote transmit code automatically returns to the normal code (Mode 1). SETTING USB This Projector is equipped with 4 Projection Lamps and the number of using lamps can be switched to 4 lamps or 2 lamps. Using 2 lamps maintains the life of the Projection Lamps. To change over Lamp Mode 1. Press the MENU button the ON-SCREEN MENU will appear. Press the POINT LEFT/RIGHT buttons to select SETTING and press the SELECT button. Another dialog box SETTING MENU will appear. 2. Press the POINT DOWN button and move a red-arrow icon to Lamp Mode. Set 4 lamps mode or 2 lamps mode by pressing the SELECT button. When Lamp Mode is set from 4 lamps mode to 2 lamps mode, the image becomes little darker. When Lamp Mode is set from 2 lamps mode to 4 lamps mode, the image become brighter gradually. Lamp Mode NOTE :After changing Lamp Mode, it cannot be switched again for 90 seconds. On start When this function is “On” the projector is automatically turned on just by switching the MAIN ON / OFF SWITCH on. NOTE:Be sure to turn the projector off properly (refer to the section “TURNING OFF THE PROJECTOR” on page 23). If the projector is turned off in the wrong steps, the On Start function does not operate properly. Projector mode Select when controlling the projector with the computer. NOTE:Before you control the projector by computer, install USB driver (optionally sold parts) and set up the computer following instruction in the USB driver package. Contact your authorized dealer. This Projector is equipped with USB port for interactive operation between the projector and the computer. Set the mode following steps below. Wireless Mouse mode Select when controlling the computer with the Remote Control of this projector.