Projector Christie Vivid Lx41 User Manual

31
VIDEO INPUT
AV SYSTEM MENU (VIDEO OR S-VIDEO)
AV SYSTEM MENU (COMPONENT VIDEO)
SELECTING VIDEO SYSTEM
Press MENU button and ON-SCREEN MENU will appear.  Press
the POINT LEFT/RIGHT buttons to move the red frame pointer
to AV SYSTEM Menu icon.
Press the POINT DOWN button to move the red arrow pointer to
system that you want to select and then press SELECT button.
1
2
If projector can not reproduce proper video image, it is necessary to
select a specific broadcast signal format among PAL, SECAM, NTSC,...

32
VIDEO INPUT
PICTURE IMAGE ADJUSTMENT
IMAGE LEVEL SELECT (MENU)
Press MENU button and ON-SCREEN MENU will appear.  Press
the POINT LEFT/RIGHT button to move the red frame pointer to
IMAGE SELECT Menu icon.1
2Press the POINT DOWN button to move the red frame pointer to
level that you want to set and then press SELECT button.
Move the red frame pointer to
level and press SELECT button.
Level being selected.
IMAGE SELECT MENU
Normal picture level preset on this projector.
Standard
Picture level adjusted...

33
VIDEO INPUT
Press the POINT LEFT/RIGHT but-
tons to adjust value.
Press MENU button and ON-SCREEN MENU will appear.  Press
the POINT LEFT/RIGHT button(s) to move the red frame pointer
to IMAGE ADJUST Menu icon.1
2Press the POINT DOWN button to move the red frame pointer to
the item you want to adjust and then press SELECT button.  The
level of each item is displayed.  Adjust each level by pressing the
POINT LEFT/RIGHT button(s).
Move the red frame pointer to
the item to be selected and
then press...

34
VIDEO INPUT
PICTURE SCREEN ADJUSTMENT
This projector has a picture screen adjustment function, which enables you to display the desirable image size.
Press MENU button and ON-SCREEN MENU will appear.  Press
the POINT LEFT/RIGHT button(s) to move the red frame pointer
to SCREEN Menu icon.
Press the POINT DOWN button and move the red frame pointer
to function that you want to select and then press SELECT
button.
1
2
NOTE : SCREEN Menu can not be operated when
“720p,” “1035i,” or “1080i” is selected on...

35
SETTING
Ceiling
When this function is “On,” picture is top / bottom and left / right
reversed.  This function is used to project image from a ceiling mounted
projector.
Rear
When this function is “On,” picture is left / right reversed.  This function is
used to project image to a rear projection screen.
Ceiling function
Rear function
Keystone
When image is distorted, select Keystone. The ON-SCREEN MENU
will disappear and the Keystone dialog box will appear. Correct
keystone distortion by pressing the...

36
SETTING
Remote control
This projector has two different remote control codes; factory-set
normal code (Code 1) and secondary code (Code 2).  This switching
function prevents remote control operation mixture (jam) when
operating several projectors or video equipment together.  
When operating projector in “Code 2,”  both projector and Remote
Control Unit must be switched to “Code 2.”  
To change code of Projector;Set Remote control in SETTING MENU to “Code 2.”
To change code of Remote Control...

37
SETTING/APPENDIX
OPERATING WIRELESS MOUSE
INSTALLATION
The Wireless Remote Control Unit is not only able to operate this projector but also be used as a wireless mouse for most
Personal Computers.  POINT buttons and two CLICK buttons are used for wireless mouse operation.
This Wireless Mouse function is available only when PC mouse pointer is displayed on a projected screen.  When ON-
SCREEN MENU or any message / dialog box is displayed on screen instead of PC mouse pointer, this Wireless Mouse...

38
APPENDIX
CLEANING PROJECTION LENS
Apply a non-abrasive camera lens cleaner to a soft, dry cleaning cloth.  Avoid using an excessive amount of cleaner.
Abrasive cleaners, solvents or other harsh chemicals might scratch a surface.
When the projector is not in use, replace the Lens Cover.
1
3
Lightly wipe a cleaning cloth over Projection Lens.2
Follow these steps to clean Projection Lens:
MAINTENANCE
WARNING TEMP. INDICATOR
WARNING TEMP. Indicator flashes red when the internal temperature of the...

39
APPENDIX
LAMP REPLACEMENT
When the life of the Projection Lamp of this projector draws to an end, LAMP REPLACEMENT indicator lights yellow.  When
a projected image becomes dark or the color of an image becomes unnatural, replacement of Projection Lamp is required.
ORDER REPLACEMENT LAMP
Replacement Lamp can be ordered through your dealer.  When ordering Projection Lamp, give the following
information to the dealer.
Model No. of your projector  : 38-VIV206-01
Replacement Lamp Type No. :...

40
APPENDIX
TROUBLESHOOTING
Before calling your dealer or service center for assistance, check matters below once again.
1. Make sure you have connected the projector to your computer or video equipment as described in section CONNECTING
PROJECTOR  on pages 11 ~ 13.
2. Check cable connection.  Verify that all computer, video and power cord are properly connected.
3. Verify that all power is switched on.
4. If the projector still does not produce an image, re-start your computer.
5. If an image still does...