Projector Christie Vivid Lite User Manual

LAMP
MODETEMP.STAND-BY
POWER-ON
AUTOPOWER
POWERAUTOMUTE
MODE
STATUS
CANCELKEYSTONEVOLUMEZOOM-PAN
MENU
ENTER
Displaying Projector Status
(This function is performed only by the wireless
remote control unit.)
Press the STATUS button.
The following statuses are displayed when the
STATUS button is pressed.
qImage mode in present input source
ePresent input source
w
Lamp timerrResizing status
tMute statusyVolume status
uBrightnessiContrast status
Press the STATUS button again to return to the
original...

POWERAUTOMUTE
MODE
STATUS
CANCELKEYSTONEVOLUMEZOOM-PAN
MENU
ENTER
0
0IMAGE
Brightness
Contrast
Factory Default
Next Page
ENTER
: Next : Select
0Color Temp.
Operating  Menu Screens
ENTER button
Operating the Menu Screens
MENU button Adjustment buttons (
, , , )
Example: Select the IMAGE menu.
Press the ENTER button.
The screen for selecting the item you wish to
adjust is displayed.
Note
•The same operation can be performed by
pressing the 
 adjustment button.
Select the item you wish to
adjust with the...

Making the Desired Adjust/Set
up
5-1 When there is a 
 mark (to next
screen) at the right of the item
you wish to adjust
Example: Select [Contrast].
(1) Press the ENTER button to display the
adjust/select/set up screen.
Note
•The same operation is possible by pressing the
 and  adjustment buttons.
(2) Make the desired Adjust/Select/Set up
with the adjustment buttons (
, ,
, ).
5-2 When selecting the item you
wish to adjust ([OK/Cancel],
[On/Off], etc.)
•Select with the adjustment buttons
(
, ).
Example:...

0Color Temp.MENU
: Return  : Adjust
You can adjust, select and set up the following items on the IMAGE Menu.
Brightness
You can adjust the brightness of the picture.
Press the 
 adjustment button to make the picture brighter, and the 
button to make it darker.
Contrast
You can adjust the contrast of the picture.
Press the 
 adjustment button to make the contrast stronger, and the 
button to make it weaker.
Sharpness (VIDEO only)
You can adjust the image quality.
Press the 
 adjustment button to make...

Previous Page
Press the ENTER button (or 
 button or MENU button) to return to
the first page of the IMAGE Menu.
Gain: Red
You can adjust the strength of the red color.
Press the 
 adjustment button to make it stronger, and the  button
to make it weaker.
Gain: Green
You can adjust the strength of the green color.
Press the 
 adjustment button to make it stronger, and the  button
to make it weaker.
Gain: Blue
You can adjust the strength of the blue color.
Press the 
 adjustment button to make it...

You can adjust, select and set up the following items from the POSITION Menu.
Horiz. Position
You can adjust the horizontal position of the image.
Adjust by pressing the 
 and  adjustment buttons.
Vert. Position
You can adjust the vertical position of the image.
Adjust by pressing the 
 and  adjustment buttons.
(If you move the image up a long way, it may become distorted, but
this is not a failure.)
Pixel Tracking (RGB only)
You can adjust the width of the picture.
Adjust by pressing the 
 and...

You can select and set up the following items from the DISPLAY menu.
Resizing
You can select whether to display the picture in real mode (with the same
resolution as the input signal) or in resizing mode (converting it to the same
XGA size as the LCD panel).
Select by pressing the 
 and  adjustment buttons.
The factory default setting is [On].
Language
You can select the language of the menu display.
Select by pressing the 
 and  adjustment buttons.
Video Standard (VIDEO/COMPONENT only)
You can select...

You can adjust and select the following items from the INSTALLATION Menu.
Auto Power Up
You can set whether or not the lamp comes on automatically when the
power plug is inserted in the socket.
Select by pressing the 
 and  adjustment buttons.
The factory default setting is [Manual].
Auto Lamp Off
You can set whether or not the lamp goes off when there is no image
input signal for about 20 minutes.
Select by pressing the 
 and  adjustment buttons.
The factory default setting is [On].
Remote Control...

2Fit a new filter holder in the
projector.
Insert the catch on the filter holder and press it
clicks into place.
About the ventilation holes
•If the ventilation holes become blocked, the temperature inside the projector rises and the lamp will fail to light. Clean the
ventilation holes about once every 6 months. Cleaning will be required more frequently if used in a particularly dusty
environment.
•When the air filter of the ventilation hole becomes hard to clean, it is ready to be changed. Purchase a...

•When the lamp reaches the end of its service life, the image becomes dark and the colors lose their vividness. When this
happens, change the lamp unit.
•When the “Approaching Recommended Lamp Life!” message appears, change the lamp unit.
•After removing the old lamp unit, handle with care to avoid breakage. Dispose of as industrial waste.
•Be sure to initialize the lamp timer after changing the lamp unit.
 WARNING
•Do not remove any screws other than those specified (  mark).
The high voltage and high...