Projector Christie Vivid Lite User Manual

USER’S MANUAL
LCD PROJECTOR
Vivid Lite
Important Information ........................................... 3
Important Safeguards .......................................... 3
Features ............................................................... 6
Checking  Accessories ......................................... 7
Notes .................................................................... 8
Names of Parts .................................................. 11
Handling  Wireless Remote Control Unit...

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful inter-
ference when the equipment is operated in a commercial environment. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual,
may cause harmful interference to radio communications.
Operation of this...

Dear Customer:
We have prepared this USER’S MANUAL to assist you in the operation of your new LCD Projector. We thank you for your
purchase and hope you will be satisfied with the quality and performance of this projector.
Please read the instructions carefully, and keep them available for future reference.
Important Information
WARNING:THIS UNIT HAS AN EXTREMELY BRIGHT LIGHT SOURCE. DO NOT
STARE INTO THE BEAM OF LIGHT. BE ESPECIALLY CAREFUL THAT
CHILDREN DO NOT STARE DIRECTLY INTO THE LIGHT.
WARNING:TO...

––Do not insert metallic objects, flammable objects or water in the ventilation holes.
If a foreign object enters the unit, always pull out the electrical plug from the wall outlet and contact your sales office. This condition may
cause fire or electrical shock.
––Do not place any heavy object on the electrical cord.
The cord will be damaged and this condition may cause fire or electrical shock.
––Do not loosen any screws that are not indicated by the 
 arrow mark.
The unit contains internal parts which...

––Be careful not to expose the projector to any steam, oily smoke, heat or humidity.
Never place the projector in a location subject to steam, oily smoke heat or humidity.  This may cause fire or electrical shock.
––Never place flammable objects such as a cigarette lighter, matches, gas canisters, spray cans, fireworks or plastic materials close to the
lamp ventilation holes.  This may cause fire or other damage.
––Always turn off the power switch before replacing the lamp.  Allow the unit to cool off...

Features
The Vivid Lite projector enlarges PC or video images and projects them onto a 23 – 250-inch screen (available on the
market).
High luminance and high resolution meet every occasion
•Achieves the highest level for this class of projector.
•A wide range of resolutions from VGA to SXGA can be met.
Functional design
•A4 file size and light weight (approx. 3.5 kg). The projector is easy to carry and set up.
Handy pocket-sized card-type remote control unit
•5 mm-thick card-type remote control unit can...

Checking  Accessories
Wireless remote control unit   1
CR 2025 lithium battery × 1
User’s manual × 1
(this manual)Power cable   1
RGB cable × 1
(Parts No. 8110430014)
Lens string × 1AV cable   1
(Parts No. 8302280021)
Lens cap (to protect the lens) × 1
Warranty Card ×1
KEYSTONEVOLUMEZOOM-PAN
×× ×
POWERAUTOMUTE
MODE
STATUS
CANCEL
MENU
ENTER
7 

 Notes
Transporting the projector
Put the projector in the original packaging when transporting. Excessive pressure on the lens may result in damage.
About the lamp
•The lamp is an expendable item.  It should be changed when
the “Approaching Recommended Lamp Life!” message is
displayed or when the lamp is nearing the end of its service
life as indicated by failure, a dark image or poor colors.
Replace with a new lamp.
•Change the lamp when the warning message shown on the
right is displayed.
•The lamp...

LED Display
•Normal or abnormal operation of the internal parts is indicated by the 3
LED on the top of the projector. (See illustration on right)
•When the power cable is plugged into the socket, the POWER-ON
LED lights orange and the projector is in standby status.
•When the POWER button is pressed in standby status, the POWER-ON
LED lights green and the lamp comes on.
•When the POWER button is pressed while the lamp is on and “Power
Off” is selected on the confirmation screen, the POWER-ON LED
flashes...

 Notes (continued)
Illumination around projector
The projector has two wireless remote control unit light receivers, on the front and rear. If the receivers are subjected to
strong light such as from fluorescent lights, the remote control unit may not function properly. In this case, move the
projector away from the fluorescent light or other light source, or position it so that light from the light source does not
shine directly on the receivers.
Moving the projector away
from the light source
Move the...