Projector Christie Vivid Green User Manual

21
English Français
Deutsch
Español
Turning the Projector On and Off
Basic Operation
POWER button
Turning On
 •Press the POWER button.
The POWER-ON monitor lights green and the lamp
comes on.
Turning Off
 •Press the POWER button.
The confirmation screen is displayed.
Green : In operation
Red : Standby status
Orange : Lamp cooling
Important
• Always remove the lens cap before turning the
lamp on, otherwise the lens cap may become
deformed.
• The power cannot be turned off by pressing the
POWER button...

22
Selecting the Desired Image
 •Press the RGB button or VIDEO
button.
The input source switches as shown below each time
the RGB button is pressed.
INPUT 1 - RGB [DIGITAL RGB or RGB (analog)]
INPUT 2 - RGB
INPUT 3 - RGB
Important
• Select digital or analog INPUT 1 signal on the
menu displayed. (See page 31)
The input source switches as shown below each time
the VIDEO button is pressed.
VIDEO
S-VIDEO
INPUT 3 - COMP (Standard or high definition
component)
Important
• Select SD (standard) or HD (high...

23
English Français
Deutsch
Español
Adjusting the Volume
 •Press the VOLUME buttons
(
, ).
The adjustment screen is displayed.
Press 
 to increase the volume.
Press 
 to decrease the volume.
The screen is exited soon after completing adjust-
ment.
Muting the Sound and Image
 •Press the MUTE button.
The sound and image can be temporarily muted by
pressing the MUTE button.
Mute status switches as shown below when the
MUTE button is pressed.
Sound muted ([MUTE] appears on screen)
Sound and image muted...

24
Displaying Projector Status
 •Press the STATUS button.
The following statuses are displayed when the
STATUS button is pressed.
1 Image mode in present input source
2 Present input source
3 Lamp timer4 Resizing status
5 Mute status6 Volume status
7 Brightness8 Contrast status
Press the STATUS button again to return to the
original screen.
Basic Operation (continued)
KEYSTONE buttons
Automatically Adjusting the Position
 •Press the AUTO button.
The horizontal position, vertical position, picture
width...

25
English Français
Deutsch
Español
0
0
IMAGE
Luminance Mode
Brightness
Contrast
Factory Default
Next Page
ENTER
: NextNormal Low
: Select
Operating the Menu Screens
ENTER button
Operating the Menu Screens
Operation bar Slide switch
MENU buttonAdjustment buttons
(
, , , )
POWER
RGB
MENU
ZOOM-PAN
ZOOM
MUTE
LASER
VIDEO
ENTER/R-MOUSE
VOLUMESOURCE
CANCEL
KEYSTONE
STATUS
FOCUS
AUTO
MOUSE
PJ
VOLUME
ENTERMENUSTATUSAUTO
VIDEORGB
POWERMUTE
KEY STONEFOCUSZOOM
ENTER button MENU buttonAdjustment buttons
(
, , , )...

26
5Making the Desired Adjust/Set
up
5-1 When selecting the item you
wish to adjust ([OK/Cancel],
[Normal/Low], etc.)
• Select with the adjustment buttons
(
, ).
Example: Select [Normal/Low] in [Luminance
Mode].
5-2 When there is a  mark (to next
screen) at the right of the item
you wish to adjust
Example: Select [Contrast].
(1) Press the ENTER button to display the
adjust/select/set up screen.
Note
• The same operation is possible by pressing the 
and  adjustment buttons.
(2) Make the desired...

27
English Français
Deutsch
Español
You can adjust, select and set up the following items on the IMAGE Menu.
Luminance Mode
You can set the luminance of the projector on [Normal] or [Low].
Select by pressing the 
 and  adjustment buttons.
The factory default setting is [Normal].
Brightness
You can adjust the brightness of the picture.
Press the 
 adjustment button to make the picture brighter, and the 
button to make it darker.
Contrast
You can adjust the contrast of the picture.
Press the...

28
Color Temp.
You can adjust the color temperature.
Press the 
 adjustment button for a blueish tinge, and the  button for a
reddish tinge.
Gain: Red
You can adjust the strength of the red color.
Press the 
 adjustment button to make it stronger, and the  button to make
it weaker.
Gain: Green
You can adjust the strength of the green color.
Press the 
 adjustment button to make it stronger, and the  button to make
it weaker.
Gain: Blue
You can adjust the strength of the blue color.
Press the...

29
English Français
Deutsch
Español
You can adjust, select and set up the following items from the POSITION Menu.
Important
• The position cannot be adjusted when DIGITAL RGB is selected as the input source.
Horiz. Position
You can adjust the horizontal position of the image.
Adjust by pressing the 
 and  adjustment buttons.
Vert. Position
You can adjust the vertical position of the image.
Adjust by pressing the 
 and  adjustment buttons.
(If you move the image up a long way, it may become distorted,...

30
You can adjust and set up the following items from the SOUND Menu.
Volume
You can adjust the volume.
Press the 
 adjustment button to increase the volume, and the  button to
decrease the volume.
The factory default setting is 20.
Treble
You can adjust the treble level.
Press the 
 adjustment button to increase the level, and the  button to
decrease the level.
Bass
You can adjust the power of the bass sounds.
Press the 
 adjustment button to increase the strength, and the  button to
decrease the...