Projector Christie Vivid Green User Manual

Important Information ................................................ 3
Important Safeguards ............................................... 3
Features .................................................................... 6
Checking the Accessories ......................................... 7
Points to Note ............................................................ 8
Names of Parts ....................................................... 11
Handling the Wireless Remote
Control Unit...

2
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications.
Operation of this...

3
Dear Customer:
We have prepared this USER’S MANUAL to assist you in the operation of your new LCD Projector. We thank you for your purchase
and hope you will be satisfied with the quality and performance of this projector.
Please read the instructions carefully, and keep them available for future reference.
Important Information
WARNING:THIS UNIT HAS AN EXTREMELY BRIGHT LIGHT SOURCE. DO NOT
STARE INTO THE BEAM OF LIGHT. BE ESPECIALLY CAREFUL THAT
CHILDREN DO NOT STARE DIRECTLY INTO THE LIGHT....

4
–– Do not insert metallic objects, flammable objects or water in the ventilation holes.
If a foreign object enters the unit, always pull out the electrical plug from the wall outlet and contact your sales office. This condition may cause
fire or electrical shock.
–– Do not place any heavy object on the electrical cord.
The cord will be damaged and this condition may cause fire or electrical shock.
–– Do not loosen any screws that are not indicated by the 
 arrow mark.
The unit contains internal parts...

5
–– Be careful not to expose the projector to any steam, oily smoke, heat or humidity.
Never place the projector in a location subject to steam, oily smoke heat or humidity.  This may cause fire or electrical shock.
–– Never place flammable objects such as a cigarette lighter, matches, gas canisters, spray cans, fireworks or plastic materials close to the lamp
ventilation holes.  This may cause fire or other damage.
–– Always turn off the power switch before replacing the lamp.  Allow the unit to cool...

6
Features
The VIVID green projector enlarges PC or video images and projects them onto a 31 – 300-inch screen (available on
the market).

High luminance and high resolution
• High luminance enables use of the projector even in a bright room.
• A wide range of resolutions from VGA to SXGA can be met.

Functional design
• Compact size and light weight. The projector is easy to carry and set up.

High image quality by digital image processing
• The projector is compatible with most video formats (NTSC,...

7
English Français
Deutsch
Español
Checking the Accessories
Wireless remote control unit x 1
Size AA batteries x 2
User’s manual  x 1
(this manual)
Warranty Card  x 1Power cable x 1
RGB cable x 1
(Parts No. 8110430014)
AV cable x 1
(Parts No. 8302280021)
PS/2 mouse connection cable x 1
(Parts No. 8110530011)
Lens cap (to protect the lens) x 1
Air filter x 1
POWER
RGB
MENUZOOM-PAN
MUTE
LASER
VIDEO
ENTER/R-MOUSEVOLUMESOURCECANCEL
MOUSEPJ 

8
Points to Note
Transporting the projector
Put the projector in the original packaging when transporting. Excessive pressure on the lens may result in damage.
About the lamp
• The lamp is an expendable item.  It should be changed when
the “Approaching Recommended Lamp Life!” message is
displayed or when the lamp is nearing the end of its service
life as indicated by failure, a dark image or poor colors.
Replace with a new lamp (available at the store where the
projector was purchased).
• Change the lamp...

9
English Français
Deutsch
Español
Monitor Display
• Normal or abnormal operation of the internal parts is indicated by the 3
monitors on the front of the projector. (See illustration on right)
• When the power cable is plugged into the socket, the POWER-ON
monitor lights red and the projector is in standby status.
• When the POWER button is pressed in standby status, the POWER-ON
monitor lights green and the lamp comes on.
• When the POWER button is pressed while the lamp is on and “Power
Off” is...

10
Points to Note (continued)
Illumination around projector
The projector has two wireless remote control unit light receivers, on the front and rear. If the receivers are subjected to strong light
such as from fluorescent lights, the remote control unit may not function properly. In this case, move the projector away from the
fluorescent light or other light source, or position it so that light from the light source does not shine directly on the receivers.
Moving the projector away
from the light...