Home > Christie > Projector > Projector Christie Roadie 25k User Manual

Projector Christie Roadie 25k User Manual

Here you can view all the pages of manual Projector Christie Roadie 25k User Manual. The Christie manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 181

Appendix E 
System Integration 
 
  Roadie 25K User’s Manual E-1 
The GPIO connector located on the side input panel provides a flexible method of 
interfacing a wide range of external I/O devices to the projector, usually so that an 
event on one device automatically triggers an event on the other. There are 7 GIO 
pins available on the 9pin D-Sub GPIO connector, which are configurable via RS232 
commands. The other two pins are reserved for ground and power – see table below 
for pin identification....

Page 182

SYTEM INTEGRATION 
E-2 
Roadie 25K User’s Manual 
(GIO?)  Request the state and configuration of all pins 
(GIO! “HHLLHLH” “OOIOOOI”) Reply of pin state and configuration 
(GIO? C2)  Request configuration for pin #2 
(GIO! C2 O)  Reply with pin #2 configuration as output 
(GIO? 2)  Request the state of pin #2 
(GIO! H)  Reply with pin #2 state as high 
 
Use the serial command RTE to specify an action that is initiated at a particular time 
or based on an external stimulus. 
For General Purpose IO “G”...

Page 183

Appendix F 
Optional Input Modules 
 
 Roadie 25K User’s Manual F-1 
The following optional input modules are currently available, and can be installed in either option slot in the projector 
(
INPUT 5 or INPUT 6). Contact your dealer for a complete and up-to-date listing. 
NOTE: Any audio connectors shown are non-functional in this projector. 
This module receives analog RGB input signals from computers or other RGB source 
devices. 
 
RGB500 Features 
◊ accepts 3, 4, or 5 wire RGB video (sync-on-green,...

Page 184

OPTIONAL INPUT MODULES 
F-2 
Roadie 25K User’s Manual 
This module receives analog RGB input signals from computers or other RGB source 
devices. Video inputs are 75
S terminated. Video outputs provide buffered loop-
through to another display device. 
 
RGB400ALT Features 
◊ accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or 
separate horizontal and vertical sync) 
◊ BNC connectors for RGB signal inputs 
◊ buffered loop-through video outputs 
 
This module receives composite video...

Page 185

OPTIONAL INPUT MODULES 
 
Roadie 25K User’s Manual F-3 
PC250 Analog Features 
◊ accepts VGA or MAC RGB video 
◊ 15 pin D connectors for video 
◊ active loop-through video outputs 
NOTES: 1) This interface does not accept VGA and MAC signals simultaneously. 
 
This module can display digital video input signals conforming to the DVI (Digital 
Visual Interface) single-channel standard. 
 
Features 
◊ Supports Digital Visual Interface (DVI) single-channel  
◊ Supports VESA Extended Display Identification...

Page 186


				            

Page 187

 
Index 
 
 Roadie 25K User’s Manual INDEX-1 
3 
3/2 Sync Offset, 5-3 
3D. See Simulation 3D 
A 
AC 
Safety, 4-2 
Troubleshooting, 5-1 
Active Input Window, 3-28 
Advanced Image Settings Menu, 3-35 
Advanced Size and Position Menu, 3-28 
AGC, 3-31 
Air Filter. See Filter (Air) 
Alignment 
Boresight (Uniform Focus), 2-42 
For Screen, 2-41 
Optical, 2-41 
All Joined (Network Setting), 2-37, 3-41 
Ambient Light, 2-10 
Anamorphic Adapter 
Installation, 2-17 
Anamorphic Image, 3-26 
Anamorphic Lens, 2-45...

Page 188

INDEX 
INDEX-2 
Roadie 25K User’s Manual 
Definition of, 3-19 
Deleting in Channel Setup Menu, 3-22 
Channels vs. Inputs, 3-18 
Checkbox Toggles, 3-17 
ChristieNET, 3-69 
Clamp Location, 3-34 
Cleaning, 4-4 
of Lens, 4-5 
of Non-optical Components, 4-6 
of Reflector, 4-5 
Supplies, 4-5 
Color (Video Option), 3-32 
Color Adjustments by X/Y Menu, 3-45 
Color Defaults, 3-36 
Color Enable, 3-34, 3-46 
Color Gamut 
How to Increase, 2-45 
Color Gamuts, Unique, 3-44 
Color Matching, 3-59 
Color Primaries,...

Page 189

INDEX 
 
Roadie 25K User’s Manual INDEX-3 
Horizontal Position, 3-27 
Horizontal Shift, 3-39 
I 
Image Adjustments, 3-24 
Image Orientation Setting, 3-39 
Image Settings Menu, 3-29 
InMenu Checkbox, 3-23 
Input 1, 2-24 
Input 2, 2-27 
Input 3, 2-26 
Input 4, 2-26 
Input 5, 2-26 
Input 7, 3-9 
Input 8, 3-9 
Input Key, 3-10 
Input Levels Menu, 3-32 
Input Power Range Switch, 2-39 
Input Video Black, 3-32 
Inputs 
Connection, 2-1 
Definition of, 3-18 
Input Keys, 3-9 
Selecting/switching, 3-19 
Selection,...

Page 190

INDEX 
INDEX-4 
Roadie 25K User’s Manual 
Load Rating, 2-15 
Locked Channel Checkbox, 3-23 
Locks, Security, 3-5 
Luma Delay, 3-32 
M 
Main Menu, 3-15 
Maintenance, 4-4 
Masking, 2-8 
Menu 
Advanced IMage Settings, 3-35 
Advanced Size and Position, 3-28 
Brightness Uniformity, 3-44 
Channel Edit, 3-23 
Channel Setup, 3-21 
Color Adjustments by X/Y, 3-45 
Color Saturation, 3-46 
Communications, 3-40 
Configuration, 3-38, 3-43 
Edge Blending, 3-44 
Ethernet Settings, 3-42 
Image Settings, 3-29 
Lamp, 3-53...
Start reading Projector Christie Roadie 25k User Manual

Related Manuals for Projector Christie Roadie 25k User Manual

All Christie manuals