Projectiondesign F22 1080p Projector User Manual

61
italianonorsk
back
set date and time
timer
PIN code
network
factory reset
service
remote control ID
DPMS
DPMS timeout
backlight timeout
menu timeout
background
splash
baudrate
broadcast
30 minutes
30 seconds
30 seconds blacklogo
19200
DPMSAbilita o disabilita lo standard DPMS (Display Power Management Signalling) . Quando questa opzione è abilitata, il proiettore passa automaticamente in modalità standby se dopo uno specifico tempo non ci sono sorgenti valide in ingresso  . Se viene ricollegata una...

62
englishdeutschfrancaisespañol
PROFILES SUB MENU
The profiles sub menu contains predefined and user saved projector setup profiles, so that a specific setting or desired projection mode quickly can be reinstated .
store settingsStores the user defined menu settings for later use .
recall settingsReintroduces the previously stored user settings .
MENU SYSTEMMENÜSYSTEMSYSTEME MENUSISTEMA DE MENÚS
SUBMENÚ PERFILES
El submenú Perfiles contiene los perfiles de configuración del proyector predefinidos y...

63
italianonorskSISTEMA DEI MENUMENYSYSTEM
PROFILER UNDERMENY
Undermenyen for profilene inneholder forhåndsdefinerte og brukerlagrede projektor oppsettsprofiler, slik at en spesiell innstilling eller ønsket projeksjonsmodus raskt kan gjeninnstalleres .
lagre instillingerLagrer brukerdefinerte menyer til senere bruk .
gjenopprett innstillingerHenter fram de tidligere lagrede innstillingene . back
store settings
recall settings
back
english
français
Deutsch
español
norsk
svensk
Русский
à´	¯
ÔŠ...

64
englishdeutschfrancaisespañol
STATUS SUB MENU
The status sub menu can be invoked through the menu system, or directly from the “INFO” key on the remote control . It gives direct, and easy to understand information on system and connected source status .
MENU SYSTEMMENÜSYSTEMSYSTEME MENUSISTEMA DE MENÚS
UNTERMENÜ STATUS
Das Untermenü Status wird entweder über das Menüsystem aufgerufen oder über die Taste INFO an der Fernbedienung . Es zeigt Ihnen direkte, leicht verständliche Informationen über das...

65
italianonorskSISTEMA DEI MENUMENYSYSTEM
STATUS UNDERMENY
Status undermenyen gir enkel og oversiktlig tilgang til informasjon om systemet, og tilkoblet kilde .
back
source information
model name
part number
serial number
manufactured (y)
manufactured (w)
software version
lamp remaining
lamp time
total operating
lamp power
MAC address
DHCP
IP address
subnet mask
default gateway
TCP/UDP port
F20 sx+
101-1200-08 072000201 200720
001-0134-01
2957 hrs31 hrs
31 hrs
00-0D-8A-43-2A-0B of
192.168.1.90...

englishdeutschfrancais
66
NO IMAGENo connection: Check if all connections are properly made .
Source off: Check if the equipment is powered on .
Lamp dead: The lamp may need replacement . 
Source hibernated: Engage the source to display and activate image .
Notebook external screen: Different notebook PC’s use different combinations of keystrokes to enable the external graphics port .
Source scan off: Check SOURCE SCAN in the INSTALLATION sub menu . If setting is OFF, the projector will not search for...

españolitalianonorsk
67
SOLUCIÓN DE PROBLEMASRISOLUZIONE DEI PROBLEMIFEILFINNING
NESSUNA IMMAGINE
Nessuna connessione:controllare se i collegamenti sono stati eseguiti correttamente .
Sorgente spenta: controllare se l’apparecchiatura è alimentata .
Lampada spenta: può essere necessario sostituire la lampada . Controllare LAMP TIME (Durata lampada) nel sottomenu UTILITIES (Utilità) .
Sorgente sospesa: impegnare la sorgente per visualizzare e attivare l’immagine .
Schermo esterno notebook: dei PC notebook...

englishdeutschfrancais
68
The projector may from time to time need cleaning . Never open the unit, as this will void any warranties  . Refer service and repair to qualified personnel only  . 
The projector is using lamps that have a limited life time  . Please refer to the LAMP CHANGE section below for further details .
Only the exterior of the unit may be cleaned  . Use a damp cloth  . Make sure no liquids enter the inside of the projector Vacuum clean all the air vents (A) regularly to maintain...

españolitalianonorsk
69
Di tanto in tanto può essere necessario pulire il proiettore . Non aprire mai l’unità, per non invalidare le eventuali garanzie  . Gli interventi di riparazione e manutenzione vanno affidati esclusivamente a personale qualificato  . 
Il proiettore fa uso di lampada che hanno una durata limitata . Per maggiori dettagli, fare riferimento alla sezione SOSTITUZIONE DELLE LAMPADE .
È possibile pulire solo l’esterno dell’unità . Usare un panno umido . Fare attenzione a non fare...

70
englishdeutschfrancaisespañol
The INDICATOR on the keypad will turn red when lamp life expires . Change the lamp when lifetime expires . Always replace lamp with the same type and rating .
Always disconnect the power cord and wait until the projector has cooled down (60 minutes) before opening the lamp cover .
WARNINGBe careful not to touch the protective glass when replacing the lamp house, this may cause the protective glass to overheat and break while in use .
WARNINGBe extremely careful when...