ProForm 9.0 Ne Elliptical Owners Manual

USER’S MANUAL
Serial 
Number 
Decal
    CAUTION
Read all precautions and instruc-
tions in this manual before using 
this equipment. Keep this manual 
for future reference.
Model No. PFEL29914.0
Serial No.                                  
Write the serial number in the space 
above for reference.
www.proform.com
To register your product and 
activate your warranty today, 
go to www.proformservice.com/
registration.
For service at any time, go to 
www.proformservice.com.
Or call 1-888-533-1333
Mon.–Fri....

2
This drawing shows the location(s) of the warning 
decal(s). If a decal is missing or illegible, see 
the front cover of this manual and request a 
free replacement decal. Apply the decal in the 
location shown. Note: The decal(s) may not be 
shown at actual size.
TABLE OF CONTENTS
WA R N I N G   D E C A L  P L A C E M E N T
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
IMPORTANT PRECAUTIONS . . ....

3
SAVE THESE INSTRUCTIONS
    WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read 
all important precautions and instructions in this manual and all warnings on your elliptical before 
using your elliptical. ICON assumes no responsibility for personal injury or property damage sus-
tained by or through the use of this product.
1.  It is the responsibility of the owner to ensure 
that all users of the elliptical are adequately 
informed of all precautions.
2.  Before...

4 

5
 UTS
 
 
 
 
 
 
 
 
 all 
 
 
STANDARD SERVICE PLANS 

6
Fan
Console
Ta b l e t   H o l d e rUpper Body Arm
Heart Rate Monitor
WheelPedal
Roller
Pedal Handle
Handle
Accessory Tray
Ramp
Handlebar
Length:  6 ft. 8 in. (203 cm)
Width:  2 ft. 1 in. (64 cm)
Thank you for selecting the revolutionary PROFORM® 
9.0 NE elliptical. The 9.0 NE elliptical provides an 
impressive selection of features designed to make your 
workouts at home more effective and enjoyable.
For your benefit, read this manual carefully before 
you use the elliptical. If you have questions...

7
M10 x 75mm Screw 
(142)–2
M10 Locknut 
(99)–4
M10 x 20mm 
Screw (144)–12
M4 x 16mm
Screw (104)–8
M10 x 45mm 
Bolt (143)–4
M10 x 70mm 
Screw (139)–2
#8 x 12mm
Screw (52)–4
 PART IDENTIFICATION CHART
Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each 
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the 
key number is the quantity needed for assembly. Note: If a part is not in the hardware...

8
•  To hire an authorized service technician to 
assemble this product, call 1-800-445-2480.
•  Assembly requires two persons.
•  Place all parts in a cleared area and remove the 
packing materials. Do not dispose of the packing 
materials until you fi nish all assembly steps.
•  Left parts are marked “L” or “Left” and right parts 
are marked “R” or “Right.”
•  To identify small parts, see page 7.
•  In addition to the included tool(s), assembly 
requires the following tools:
one Phillips screwdriver...

9
4.  Orient the Rear Stabilizer Cover (2) as shown, 
and press it onto the Frame (1). 
 Attach the Rear Stabilizer Cover (2) with two 
M4 x 16mm Screws (104).
4
104
104
1
2
3.  With the help of a second person, place some of 
the packing materials (not shown) under the rear 
of the Frame (1). Have the second person hold 
the Frame to prevent it from tipping while you 
complete this step. 
 Identify the two Rear Stabilizers (5).
 Attach one of the Rear Stabilizers (5) to the 
Frame (1) with three M10 x...

10
6
104
1
8
6.  Orient the Front Stabilizer Cover (8) as shown, 
and route the Power Cord (not shown) over 
the top of the Front Stabilizer Cover. Then, 
press the Front Stabilizer Cover onto the 
Frame (1). 
 Attach the Front Stabilizer Cover (8) with two 
M4 x 16mm Screws (104).
55.  With the help of a second person, place some 
of the packing materials (not shown) under the 
front of the Frame (1). Have the second per-
son hold the Frame to prevent it from tipping 
while you complete this step....