ProForm 60 Rt Manual

21
   Locate the Reed Switch (33) and the Magnet (32) 
on the right side of the Pulley (31). Turn the Pulley 
until the Magnet is aligned with the Reed Switch. 
Make sure that the gap between the Magnet 
and the Reed Switch is about 1/8 in. (3 mm). 
If necessary, loosen the #8 x 3/4" Truss Head 
Screw (14), move the Reed Switch slightly, and 
then retighten the Screw. Carefully slide the Motor 
Hood (not shown) back on by lining up the guides. 
Reattach the Motor Hood with	the	five	#8	x	3/4"...

22
SYMPTOM: The walking belt is off-center or slips 
when walked on
a.  
If the walking belt is off-center,	first	remove	the	
key and UNPLUG THE POWER CORD. If the 
walking belt has shifted to the left, use the hex 
key to turn the left idler roller screw clockwise 1/2 
of a turn; if the walking belt has shifted to the 
right, turn the left idler roller screw counterclock-
wise 1/2 of a turn. Be careful not to overtighten the 
walking belt. Then, plug in the power cord, insert 
the key, and run the...

23
EXERCISE GUIDELINES
These guidelines will help you to plan your exercise 
program. For detailed exercise information, obtain a 
reputable book or consult your physician. Remember, 
proper nutrition and adequate rest are essential for 
successful results. 
EXERCISE INTENSITY
Whether your goal is to burn fat or to strengthen your 
cardiovascular system, exercising at the proper inten-
sity is the key to achieving results. You can use your 
heart rate as a guide to find the proper intensity level. 
The...

24
 1  8 #8 x 1/2" Ground Screw
 2  6 3/8" x 3 1/4" Screw
 3  6 3/8" Star Washer
 4  34  #8 x 3/4" Screw
 5  2 5/16" x 3/4" Screw
 6  4 5/16" Star Washer
 7  2 5/16" x 3" Screw
 8  6 #10 x 3/4" Screw
 9  2 3/8" x 2 1/2" Bolt
 10  4 3/8" Nut
 11  2 M6 x 55mm Screw
 12  2 3/8" x 1" Bolt
 13  3 Hood Clip
 14  19  #8 x 3/4" Truss Head Screw
 15  1 3/8" x 1 3/4" Bolt
 16  2 3/8" Jam Nut
 17  2 1/4" x  3/8" Screw
 18  4 #8...

25
EXPLODED DRAWING A
39
40
3018
323314
30
29
3141 18
19
19
45
20
44
27
28
14
34
371
20
36
14
28
14
14
14
1411
14
14
14
43
46
11
42
17
35
77
77
25
25
19
19
14
14
14
14
14
4
38
24
24
22
14
14
14
83
20
20
79
79 14
1
1
1
82
83
83
83
83
83
83
83
Model No. PFTL39511.0 R0911A 

26
EXPLODED DRAWING B
52
4
454
53
48
13
51
80
15
1616
1
49
4
55
47
4
4
4
26
10
26
50
50
13
13
4
4
10
4
4
Model No. PFTL39511.0 R0911A 

27
EXPLODED DRAWING C
66
68
74
69
10
9
9
75
7278
72
78
78
71
78
71
69
1075
70
70
8
67
70
2
3
23
3
2
62
4
8
861
59
5
6
4
4
4
47
6
4
58
63
63
73
4
57
64
60
60
1
7
6
4
4
56
4
4
4
4
4
44
423
23
5
6
70
12
12
421
81
76
1
65
65
Model No. PFTL39511.0 R0911A 

Part No. 317666 R0911A  Printed in China © 2011 ICON IP, Inc.
ORDERING REPLACEMENT PARTS
To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to  
provide the following information when contacting us:
•		the	model	number	and	serial	number	of	the	product	(see	the	front	cover	of	this	manual)
•		the	name	of	the	product	(see	the	front	cover	of	this	manual)
•			the	key	number	and	description	of	the	replacement	part(s)	(see	the	PART 	LIST	and	the	EXPLODED...