Pocket Radio Sangean DT200v Operating Instruction
Have a look at the manual Pocket Radio Sangean DT200v Operating Instruction online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 22 Sangean manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
1. On/Off Button 2. Volume Control 3. Earphone Jack 4. Lcd Ddisplay 5. Tuning Control 6. Tuning Control 7. Band Selection Button 8. Mono/Stereo Button 9. Memory Button 10. Select Button 11. Speaker On/Off Switch 12. Battery Compartment 13. Lock Switch 14. Belt ClipLOCATION OF CONTROLSCongratulations and welcome to The SANGEAN WORLD OF LISTENING! To insure proper operation please famililarize Yourself with these instructions before using your New receiver2
The battery cover is located on the back of the unit.
Slide the cover in the direction of the arrow to gain
access to the battery compartment(12). Insert 2
AA batteries into the compartment(12). Make sure
that the batteries are positioned in accordance with
the diagram located below batteries in battery com-
partment. Replace cover.BATTERY INSTALLATIONNOTE:
(1) A flashing E appearing on the LCD
Display indicates a weak battery and
replacement is necessary
(2) To ensure that the preset memories are
not lost during the battery replacement,
two steps must be followed . Make sure
that the power ON/OFF switch is in the
OFF position and the battery
replacement is completed within one
minute . If these two steps are not
accomplished , the memory will have to
be reset5
Adjust the Volume Control(2) by rotating clockwise to increase Volume.ANTENNA/EARPHONE USEThe cord connecting the headphones to the re- ceiver acts as an antenna during FM/TV reception and should be extended as much as possible to increase FM/TV sensitivity . Insert the Earphones into the Earphone Jack(3).Abuilt-in Ferrite Ante- nna is provided for AM reception and it is only necessary to rotate the radio for maximum signal strength during AM listeningSPEAKER ON/OFF SELECTORspeaker Output may be turned on or off using the Speaker ON/OFF Selector (11).A( ) will appear in the LCD Display (4) if the Speaker On/Off switch(11) is in the off position and the headphones are inserted into the Earphone Jack(3).The Speaker On/Off Selector must be in the Off position with the earphones plugged into the earphone jack to receive FM stereo programsVOLUME CONTROL6
AM 520-1710KHZ Internal/Rotate radio for
best reception
FM 87.5-108MHZ External/Make sure Head-
phones are inserted into
Headphone Jack
TV ch.2-13(VHF) External/Make sure Head-
phones are inserted into
Headphone JackTUNING THE RADIOBAND FREQUENCY ANTENNAA SCAN TUNNING
Turn on the Radion by pressing On/Off Button
(1).Select AM,FM or TV Band by pressing
Band Selection Button(7) and then press and
Hold the Tuning Control(5) or(6) for more than
1/2 second. The Radio will Scan all the
frequencies in that Band and will stop
automatically for 3-4 seconds each time it
lands on an active station.Push the Tuning
Control again and the Radio will stay at the
Station you have selected. The Radio will turn
tself off automatically after 60 minutes of
Operation or you may turn it of at anytime by
Pressing the On/Off Button.7
B MANUAL TUNING
Turn on the Radio by pressing On/Off Button
(1). Select AM,FM or TV Band by pressing
Band Selection Button (7).Desired station
May be selected by either pressing the Tuning
Control(5)or(6) intermittently until the desired
Station is reached or pressing and holding the
Tuning Control until the desired station is
Reached. Release and push the Tuning
Control once again to retain the desired
Station.C MEMORY TUNING(STAION PRESET)
Turn on the Ridio by pressing On/Off Button
(1).Select AM or FM Band by pressing Band
Selection Button (7).Tune to the desired sta-
Tion using the Manual or Scan Tuning Methods
As reached and indicated in the desired station
Is reached and indicated in the LCD Display
(4) Press the Memory Button (9).A M will
flash in the LCD Display. During its flashing
push the Select Button (10).The Number of
the Memory position will appear successively
each time the Select Button is pressed. Select
the Number Position for the station appearing
in the LCD Display by pressing the Menory
Button (9) when the correct position appears8
In the LCD Display. You may store a total of
19 stations in any mix from any band.Original
stations are eliminated when new stations are
selected to take their places.D MEMORY TUNING (STATION RECALL)
Turn on the Radio by pressing On/Off Button
(1). Select AM, FM or TV Band by pressing
Band Selection Button (7). Pressing and
Holding the Select Button (10) for more than
1/2 second will begin displaying the stored sta-
tion and their associated numbers one by one
in the LCD Display .Numbers order of display
may be changed form ascending to descen-
ding and vice versa at any time by pressing
the Tuning Controls (5) or (6) .It is only
necessary to press the Select Button a second
time when the desired station appears in the
LCD Display to retain the desired stationMonaural or Stereo reception may be selected
Through the Headphones during FM reception by
Alternately pressing the Mono/Stereo Button (8).
The Speaker On/Off Switch (11) must be in the Off
Position.MONO/STEREO BUTTON9
To prevent accidental changing of any o the radio settings move the Lock Switch (13)to its up , locked position( ). To release simply move the switch to its down position. IT IS IMPORTANT TO MAKE SURE LOCK SWITCH IS IN ITS DOWN POSITION WHEN RADIO IS TO BE USED AS RADIO IS COMPLETELY INOPERATIVE UNTIL LOCK SWITCH IS RELEASED . If the Radio is not to be Used for any extended period of time battery power Savings may be realized by setting-Lock Switch In its locked ( ) position during storage.LOCK SWITCHA removable Belt Clip(14) is provided on the back Of the unit.It can be removed by gently pushing Where indicated on the back of the clip and moving The clip in the direction of the battery case ad in- Dicated in the illustration.Reverse procedure to Reinstall clip.BELT CLIP10REMOVALREINSTALL1414